用拖动电流确定气缸压缩压力的试验研究

从理论上分析了拖动时发动机缸内气体压力、漏气、惯性力及摩擦等因素对发动机力矩的影响及拖动电流与气缸压缩压力的关系,并在此基础上做了大量试验,利用一元线性回归分析的方法处理试验数据,得到了拖动电流和压缩压力的经验关系式,验证表明,用此公式检测气缸压力精度在48％以内,而且操作简单,能够达到快速检测压缩压力的目的。     

不同加载方法对甲板大开口分段有限元计算的误差分析

利用ＭＳＣ－ＮＡＳＴＲＡＮ有限元程序模拟计算甲板大开口的应力．建立简单的总体和分段力学模型,采用不同的加载方法进行甲板应力计算,将局部应力计算结果与整体应力计算结果比较,得出各种加载方法有限元计算的误差,从而给出误差小、建模简单的局部分段模型加载的最佳方法．     

密切值法用于海军舰船招标工程的评价

根据海军舰船招标工程涉及的各个方面 ,建立舰船招标工程评价指标体系 ,运用密切值法对海军舰船招标工程进行评价 ,为舰船招标工程评价提出新的方法     

舰船推进轴系设计方案的综合评估

探讨了将多目标决策理论应用于舰船推进轴系设计方案综合评估的方法 ,建立了推进轴系设计方案的多层次评估模型 ,讨论了基于层次分析法评估指标权值确定的矢量计算方法 ,给出了运用模糊隶属函数的底层典型定量指标的确定方法 .文中论述的方法对舰船推进轴系设计方案的科学评估决策具有实用价值     

传递矩阵法在连续系统中的作用

在分析离散系统振动时,传递矩阵法是一种重要的方法。将传递矩阵法应用到具有分布质量的连续系统中,给出了具有Rayleigh阻尼形式的梁在随机激励作用下响应分析。     

励磁突变对无刷励磁同步发电机整流系统负载电流的影响

分析了无刷励磁同步发电机整流系统突加/突卸励磁时的过渡过程,得到了影响负载电流上升和下降时间的主要时间常数,并对理论分析结果进行了仿真和实验研究,仿真结果与理论分析吻合良好.实验波形所反映的变化趋势亦与仿真及理论分析结果较为符合.     

正弦波型直流无刷电动机位置伺服系统的变结构控制

在分析正弦波型直流无刷电动机数学模型的基础上,采用比例等速变速控制策略(PCV)设计控制器,应用于正弦波型直流无刷电动机位置伺服系统.仿真结果表明:与传统PI控制器比较,PCV控制策略可以明显改善系统的品质,并增强系统的鲁棒性.     

Steady-state analysis of load balancing with Coxian-2 distributed service times

This paper studies load balancing for many-server (N servers) systems. Each server has a buffer of size b ? 1, and can have at most one job in service and b ? 1 jobs in the buffer. The service time of a job follows the Coxian-2 distribution. We focus on steady-state performance of load balancing policies in the heavy traffic regime such that the normalized load of system is λ = 1 ? N^?α for 0 < α < 0.5. We identify a set of policies that achieve asymptotic zero waiting. The set of policies include several classical policies such as join-the-shortest-queue (JSQ), join-the-idle-queue (JIQ), idle-one-first (I1F) and power-of-d-choices (Po d) with d = O(N^α log N). The proof of the main result is based on Stein's method and state space collapse. A key technical contribution of this paper is the iterative state space collapse approach that leads to a simple generator approximation when applying Stein's method.     

Effect of nano powder (Al2O3-CaO) addition on the mechanical properties of the polymer blend matrix composite

This work describes the preparation and study of the properties of composite nanoparticles prepared by the sol-gel method which consists of two materials (Al₂O₃-CaO), and study the effect of these nanoparticles on the mechanical behavior of a polymer blend (EP 4% + 96% UPE). The powder was evaluated by X-ray diffraction analysis, scanning electron microscopy analysis (SEM), particle size analysis, and energy dispersive X-ray analysis (EDX). The mechanical behavior of the composite material was assessed by tensile test, bending test and hardness test. The evaluation results of the composite nanoparticles showed good distribution of the chemical composition between aluminum oxide and calcium oxide, smoothness in particles' size at calcination in high and low temperatures, formation of different shapes of nanoparticles and different (kappa and gamma) phases of the Al₂O₃ particles. The results of mechanical behavior tests showed marked improvement in the mechanical properties of the resulted composite material, especially at 1.5%, compared with polymer blend material without nano powder addition. The tensile properties improved about (24 and 14.9) % and bending resistance about (23.5 and 16.8) % and hardness by (25 and 22) % when adding particles of size (63.8 and 68.6) respectively. Therefore, this reflects the efficiency of the proposed method to manufacture the nanocomposite powder and the possibility of using this powder as a strengthening material for the composite materials and using these composite materials in bio applications, especially in the fabrication of artificial limbs.     

市场比较法在德汇国际广场火灾损失核定中的应用

介绍了市场比较法的运用原理、要求以及使用该方法的基本前提和基本步骤,并将该方法在火灾损失核定中具体应用,取得了较好的结果,最后总结了商品核定损失工作中的经验,为火灾损失核定提供了一种新的方法。