基于静止标量磁强计的运动舰船定位问题的研究

建立了静止标量磁强计对运动舰船定位的模型,并给出了用遗传算法求全局较优解、然后用单纯形法进行精确局部搜索的求解参数的方法.仿真实验表明这种方法有效、可行.     

基于模糊推理的机动目标自适应多模型跟踪算法

针对当前空中来袭目标的主要特点,运用模糊理论和多模型理论探索空中机动目标跟踪问题,并设计了一种模糊自适应多模型(FAMM)目标跟踪算法,该算法采用五个基本模型,以加速度估值作为模糊推理系统的输入,经模糊推理融合得到系统状态和方差的估计值以及下一时刻的滤波模型(最多三个).经Monte Carlo仿真研究,与IMM算法相比较,该算法不仅在目标弱机动或不机动条件下,而且在复杂机动时能更稳定、精确地跟踪目标,较好地满足了海上对空防御作战中跟踪机动目标的需求.     

动态威胁环境下单无人机测向定位航迹优化算法

为解决单架无人机在动态战场环境下的测向定位问题,提出了一种基于动态窗口法的单机测向定位航迹优化算法。以最大化Fisher信息矩阵行列式为测向定位评价准则,在由动态探测雷达和静/动障碍构成的动态战场环境中,基于动态窗口法思想,将测向定位航迹优化评价准则由传统的单步最优原则扩展到对多步预测航迹的评价,同时考虑雷达探测和静/动障碍环境对预测航迹的影响,通过滚动时域方法控制无人机最优航向。仿真结果表明,所提方法能够使无人机在有效逃避雷达探测威胁以及规避环境中静/动障碍的条件下保证对目标的高精度测向定位,为解决动态战场环境下的单架无人机测向定位问题提供了新思路。     

激光辐照下45#钢板响应特性

采取实验和数值模拟相结合的方法对激光辐照45#钢板的响应特性进行研究。基于连续光纤激光发射系统,开展钢板的激光辐照实验,得到温度场分布及靶板的烧蚀穿孔特性;基于ANSYS建立靶板有限元模型,模拟激光辐照下靶板的热响应过程,得到了靶板厚度、激光功率和光斑直径等因素对靶板温度分布及靶板穿孔特性的影响规律。     

【专题】基于深度学习及FPGA的装备目标检测研究

本文应用深度学习技术实现海天背景下基于可见光、红外方式成像的舰船及角反、烟幕干扰的目标检测,这也是反舰导弹作战使用的关键技术之一。采集的可见光与红外成像目标检测数据集涵盖实施典型干扰下的态势场景,贴近实战;结合四种不同的目标检测机制,选取YOLOV3、Faster R-CNN、SSD及CenterNet四种典型模型分别进行训练与验证,通过对比分析进一步提高弱小目标、复杂干扰态势的的检测,可以实现端到端的高精度装备目标检测模型。在确保精度的前提下基于现场可编程门阵列（FPGA）进行软硬件协同设计,通过对比分析选定基于Vitis AI的实施方案,经过模型的量化、编译与优化,可在保证检测效率的前提下快速实现模型的小型化部署,便于进行装备移植。研究结果表明,该研究内容可有效提高现役反舰导弹目标检测的准确率。     

Ricochet quantification using a multiple sensor approach

This study investigates the ricochet behaviour of three different small-arms projectile types using a novel ricochet measuring device.The results can be used to estimate the danger potential of ricochets on shooting ranges.A ricochet is the change of direction and velocity of a projectile after impacting an oblique surface.This impact produces strong vibrations on a rigid plate.During this impact,flexural waves travel radially outwards from the point of impact.These waves are used to determine the properties of the impactor with accelerometers situated on the target surface.With the use of two measurement plates,one can produce a ricochet and detect the velocity at the same time.Accelerometers are suitable for accurate momentum measurements of single impacts.However,depending upon strike velocity and the impact angle,a ricochet can separate in multiple fragments after being deflected.From the operational safety perspective,these fragments need to be detected,as well.The approach of a coupled sensor concept was chosen to solve this problem.Thermographic sensors were additionally used to visualise the heat which is produced after pene-trating a rubber layer pasted in front of the steel target plate.With this approach one was able to detect the position of impact.The investigations showed that the measurement system performance is better with a multiple sensor design,which includes accelerometers for the velocity,impact strength and partly the position measurement,while the thermographic sensor was used for the position measurement and partly the momentum measurement.The investigated ammunition showed plausible fragmentation behaviour,and the results can already be used to estimate the danger potential of different ammunition types.Frangible projectiles fragment to small particles already after being deflected under a small angle.However,Full Metal Jacket projectiles with or without a steel core do not fragment under angles which are less than 5°.The objective of the paper is to demonstrate the possibility of measuring the complex ricochet me-chanics of small projectiles using standard accelerometers with the adequate signal processing approach.This measuring system is supported by an off the shelf thermographic camera.     

Rigid elliptical cross-section ogive-nose projectiles penetration into concrete targets

The elliptical cross-section ogive-nose projectile (ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs has not been completely understood. The objective of this study was to investigate the pene-tration performance of ECOPs into concrete targets using a theoretical method. A general geometric model of ECOPs was introduced, and closed-form penetration equations were derived according to the dynamic cavity-expansion theory. The model was validated by comparing the predicted penetration depths with test data, and the maximum deviation was 15.8％. The increment in the penetration depth of the ECOP was evaluated using the proposed model, and the effect of the major—minor axis ratio on the increment was examined. Additionally, the mechanism of the penetration-depth increment was inves-tigated with respect to the caliber radius head, axial stress, and resistance.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

雷达空间目标识别仿真系统设计

设计了基于雷达观测的空间目标识别仿真系统,分析了主要功能组成、仿真系统技术关键,介绍了ISAR成像技术及雷达空间目标RCS预估系统的组成和方法,仿真实践证明,该系统具有一定的实用价值。     

基于U-D分解滤波的交互多模型算法

简要回顾了基于相控阵雷达的三维空间中机动目标建模与自适应跟踪的机理,针对交互多模型算法在其跟踪应用过程中可能会出现的滤波发散问题,提出了一种基于U-D分解的交互多模型目标跟踪算法.该算法可以有效地限制交互多模型算法滤波计算过程中的滤波发散的可能性,从而使得IMM算法更加稳定.