Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

Some new results on the preservation of the NBUE and NWUE aging classes under the formation of coherent systems

We consider the classical problem of whether certain classes of lifetime distributions are preserved under the formation of coherent systems. Under the assumption of independent and identically distributed (i.i.d.) component lifetimes, we consider the NBUE (new better than used in expectation) and NWUE (new worse than used in expectation) classes. First, a necessary condition for a coherent system to preserve the NBUE class is given. Sufficient conditions are then obtained for systems satisfying this necessary condition. The sufficient conditions are satisfied for a collection of systems which includes all parallel systems, but the collection is shown to be strictly larger. We also prove that no coherent system preserves the NWUE class. As byproducts of our study, we obtain the following results for the case of i.i.d. component lifetimes: (a) the DFR (decreasing failure rate) class is preserved by no coherent systems other than series systems, and (b) the IMRL (increasing mean residual life) class is not preserved by any coherent systems. Generalizations to the case of dependent component lifetimes are briefly discussed.     

某型飞机短周期模态特性分析

对纵向短周期模态方程进行了推导和简化,分析了短周期模态的成因和影响的因素,以某型飞机为例计算了本体的短周期模态参数变化规律,分析了其不足,并提出改进方法并进行了计算验证,得到了较好的结果。     

对接组合体初始姿态影响的建模研究

建立了对接过程对组合体初始姿态影响的解析与数值模型。解析模型采用相对于整体质心的动量矩定理,给出了对接完成后组合体姿态角速度计算的解析表达式。结合追踪器的绝对运动方程和目标器的相对运动方程,建立了基于对接动力学的数值模型。通过单一偏差和组合偏差两种算例,对解析和数值模型得到的组合体初始姿态角速度进行了对比分析。计算结果表明,两种模型绝对偏差在0.07°/s以内,相对偏差在10%以内,另外给出了两种模型在工程任务中各自的适用阶段。     

室内装饰织物燃烧特性研究

室内装饰织物因其容易点燃、燃烧速度快、蔓延迅速等燃烧特性,对室内火灾的发展蔓延及火灾危害都有重要影响。运用锥形量热仪对棉麻、涤纶、帆布、泡纱、条绒等5种室内装饰织物的燃烧性能进行了实验研究,测量了室内装饰织物在不同热辐射条件下的燃烧特性,并对实验数据进行图像拟合,通过具体的实验数据和图像分析比较了5种室内装饰织物在不同热辐射条件下的点燃时间、热释放速率、质量损失速率、比消光面积及CO生成量。最后得出了各种织物的火灾危险性相对大小。     

西藏与内地古建筑常用木材燃烧特性对比研究

为研究西藏高海拔条件对古建筑火灾的影响,分别在拉萨与廊坊进行了中等规模木垛燃烧实验。测得了木垛燃烧的质量损失速率、火焰高度和燃烧温度,并分析了空气中氧气含量和大气压力对木垛引燃和燃烧的影响。实验表明：在拉萨低气压条件下,木垛引燃难度加大、燃烧时间增加、质量损失速率降低、木垛中心温度降低。     

装备维修中备件需求率的预计方法

通过研究装备维修过程中器件的固有可靠性和维修性,着重分析了影响维修器件需求率的主要因素.利用系统建模和仿真的方法,分别针对耗损类型器件和可修复类型器件建立了相应的需求数学模型,最后给出了维修备件需求率的预计方法.     

Cu粉粒径及含量对Ni/MH电池负极放电性能的影响

为了提高Ni/MH电池中储氢电极的放电性能,以电解Cu粉为充填材料与活性物质混合制备电极,研究Cu粉粒径及含量对电极性能的影响。研究发现,Cu粉粒径越小,含量越高,电极的放电容量、高倍率放电性能、及在低温和高温下的放电能力均提高,且Cu充填电极的性能优于Ni充填电极。Cu充填电极中析氢反应的交换电流密度较大,过电势较小,说明其电催化活性好,电极反应阻力小。SEM分析发现,充放电循环后的Cu充填电极,其储氢合金颗粒表面覆盖着一层细小Cu颗粒和丝状物,这是电极性能提高的主要原因。     

装备战损率与损坏率关系研究

装备的损坏率是决定装备维修保障的重要依据,通过对装备战损率及其分布的分析,给出了在维修机构修复能力一定的条件下相应的损坏率及其分布的模型,可为装备维修保障提供决策。     

反直升机智能雷战斗部研制费用/效能分析

给出了反直升机智能雷战斗部总体效能的评价体系。对各种评价方法进行了分析 ,提出了适用于智能雷战斗部总体效能评价的层次 TOPSIS法。应用灰色系统预测理论解决智能雷战斗部研制费用估计问题 ,建立了灰色系统 GM模型。采用费效比值准则能较好地反映智能雷战斗部综合能力。通过实例计算可以看出 ,该方法能广泛地应用于弹箭系统