一种面向宽带复杂信号侦察的可配置计算应用框架

可配置计算系统的优势与系统设计过程的复杂性是一对矛盾,可配置计算框架为此提供了有益的思路。但受限于适用范围与通用性考虑,已有的特别是商业框架仅支持系统的静态重构。本文针对宽带信号侦察这一特定应用领域,提出了一种功能级可配置计算应用框架BSRRCS-RCAF,该框架将领域应用中具有共性的计算与功能模块抽取和集中起来,形成二进制比特流配置文件库,并提供构建此类系统的公共服务体系。基于公共服务体系以及配置文件库,当需要修改或者重新构建宽带信号侦察系统时,只需在现有框架下动态调用配置组件库,或者遵循框架的统一设计接口完善补充组件库中的特定功能部分,整个系统设计框架将得到方便复用,便于实现基于快速重构的多种系统功能。     

二维超声速空气引射器启动特性试验研究

xxxx超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据：当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

基于行为建模的移动代理性能评估

针对移动代理的分布式应用性能评估需求,建立了移动代理生命周期中主要行为的网络负载模型和时间消耗模型.在3种典型分布式应用想定下,分析了基于C＼S模式和移动代理模式的应用实现基本过程,对两种模式下的网络负载和执行时间进行了仿真比较,结果证明了在访问节点数量较多,网络传输速率较低时,移动代理模式的具有更好性能.     

月壤参数对月面着陆气囊缓冲性能的影响

为研究月壤参数对气囊缓冲性能的影响,根据“嫦娥三号”的着陆工况设计了月面着陆气囊,并基于可压溃泡沫模型建立了考虑月壤特性的气囊缓冲动力学模型。对不同月壤下气囊的缓冲过程进行分析,发现月壤越软有效载荷冲击加速度越小,但气囊会陷入月壤中,不利于对外排气,影响其缓冲效果。因此,采用气囊峰值压力、有效载荷最大加速度和最大下落高度3个指标对气囊缓冲性能进行综合评价,定量研究了月壤参数的影响规律。结果表明:月壤密度、剪切模量及屈服参数a₀和a₁对缓冲性能的影响较大,且对前两个指标为正影响,对后一个指标为负影响。进一步研究发现,这4个月壤参数与3个缓冲性能指标之间〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCZX.TIF;%129%129〗听语音 聊科研与作者互动 均为指数函数关系。     

节点实时性能自适应的集群资源分配算法

由于配置和所运行作业的不同,集群各节点的实时性能差异较大。为提高集群性能,提出节点实时性能自适应的集群资源分配算法 (node real-time performance adaptive cluster resource scheduling algorithm,NPARSA)。节点实时性能用其配置(CPU核数及速度、内存容量、磁盘容量)和实时状态参数(CPU、内存和磁盘的剩余数量及磁盘读写速度)表示。NPARSA根据作业类型自主选择节点性能评价指标的权值,实现节点实时性能对于作业类型的自适应。实时性能最优的节点分配给作业。虚拟机实验和物理集群实验表明,与Spark默认资源分配算法、没有考虑作业类型与节点匹配的算法、使用作业和节点匹配差异程度作为资源分配依据的算法相比,NPARSA能更有效地缩短作业执行时间、提高集群性能。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

新型夜瞄复合荧光材料在步兵轻武器中的应用研究

采用自制的复合荧光粉体和化学载体成分,研制出一种步兵轻武器新型夜瞄复合荧光材料.试验研究和实际使用结果表明,研制的新材料发光时间长、亮度高,具有良好的耐温、耐腐蚀性能,不受轻武器的日常使用和维护影响,可满足步兵轻武器夜间瞄准需求.     

外军无人水面艇发展现状与趋势

文章介绍了美、以等国军用无人水面艇的发展现状,探讨了无人水面艇的典型作战应用,在此基础之上分析了外军无人水面艇的发展特点和趋势。     

钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。