Server scheduling on parallel dedicated machines with fixed job sequences

We consider server scheduling on parallel dedicated machines to minimize the makespan. Each job has a loading operation and a processing operation. The loading operation requires a server that serves all the jobs. Each machine has a given set of jobs to process, and the processing sequence is known and fixed. We design a polynomial‐time algorithm to solve the two‐machine case of the problem. When the number of machines is arbitrary, the problem becomes strongly NP‐hard even if all the jobs have the same processing length or all the loading operations require a unit time. We design two heuristic algorithms to treat the case where all the loading times are unit and analyze their performance.     

一类飞行器载荷设计的三分段方法研究与应用

为有效解决传统载荷设计方法中存在的诸多不足,提出一种适用于一类飞行器载荷设计的三分段法,即分段刚度、分段质量和分段气动。该方法能够很好地逼近飞行器的真实质量分布和气动载荷分布。针对简化飞行器,分别利用三分段法、理论计算法和质量分站法计算其模态参数和截面载荷。结果表明,三分段法和理论计算法在模型参数、计算原理上是一致的,基本可以认为是一种方法,因而它们的模态参数和截面载荷完全吻合;质量分站法所得左、右截面载荷不一致,且相差很大,还不符合真实载荷情况。总之,采用三分段法能够得到较为真实、合理的飞行器截面载荷分布,且工程应用简便,方法合理、可信,同时还可以在很大程度上降低飞行器载荷设计和结构设计的难度。     

逐步Ⅰ型混合截尾试验下Burr部件的可靠性分析

在逐步Ⅰ型混合截尾试验下,研究了Burr部件寿命参数及可靠性指标的极大似然估计和Bayes估计.利用简单迭代方法,给出了寿命参数和可靠性指标的极大似然估计的数值解.然后利用Lindely Bayes近似算法得到了平方损失下寿命参数以及可靠性指标的Bayes估计.最后,运用Monte-Carlo方法对各估计结果作了模拟比较,结果表明Bayes估计较极大似然估计的误差小.     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

新型硫代双烯镍络合物合成及其对菁染料的光稳定作用

在合成中间体二(4-叔丁基苯基)羟乙酮基础上,进一步合成了双(1,2-二(4-叔丁基苯基)-1,2-二硫代双烯)镍络合物(DYE-02),利用核磁共振氢谱、红外光谱和元素分析等方法对中间体及DYE-02的结构进行了表征,并研究了DYE-02自身的光稳定性能及其对菁染料(Cy7)的光稳定作用.结果表明,与双(1,2-二苯基-1,2-二硫代双烯)镍络合物(DYE-01)相比,苯环上引入叔丁基后,DYE-02的最大近红外吸收波长在885nm,发生明显的红移,具备更好的自身光稳定性,并且能明显提高菁染料的光稳定性.     

Sojourn times in G/M/1 fork‐join networks

We consider a processing network in which jobs arrive at a fork‐node according to a renewal process. Each job requires the completion of m tasks, which are instantaneously assigned by the fork‐node to m task‐processing nodes that operate like G/M/1 queueing stations. The job is completed when all of its m tasks are finished. The sojourn time (or response time) of a job in this G/M/1 fork‐join network is the total time it takes to complete the m tasks. Our main result is a closed‐form approximation of the sojourn‐time distribution of a job that arrives in equilibrium. This is obtained by the use of bounds, properties of D/M/1 and M/M/1 fork‐join networks, and exploratory simulations. Statistical tests show that our approximation distributions are good fits for the sojourn‐time distributions obtained from simulations. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于系统分层与故障树的故障诊断方法

提出了一种新的故障诊断与定位方法 ,该方法利用产品在结构和功能上具有一定层次的特点进行结构和功能的分解 ,这样将故障缩小在一定的功能范围内 ,然后在一个较小范围内利用故障树进行诊断和故障定位。该方法比较适合于电子系统的故障诊断和定位 ,具有简洁、高效的特点。     

基于Markov状态转移的动态可靠性分析

基于系统的马尔可夫性假设,对系统状态进行适当的离散化处理,利用状态转移方法来描述系统的动态随机过程.在求得状态转移矩阵后,再建立离散动态事件树,来求得系统故障概率.用此方法具体分析了水位调节系统.     

用动网格法计算理想平板的颤振导数

提出了一种数值模拟振动的理想平板绕流场 ,并提取其气动导数的方法。时间相关的不可压N S方程采用Projetion 2格式解耦 ,关于中间速度的动量方程的时间和空间离散采用二阶半隐格式 ,压力Possion方程迭代用多层网格法加速收敛。分别计算平板作竖向强迫振动或扭转强迫振动的气动力 ,用动网格法考虑平板和气流的耦合作用。由计算得到的气动力用最小二乘法确定 8个气动导数。计算结果和理想平板的Theodorsen理论值有较好的一致性     

液体火箭发动机非线性燃烧不稳定过程的并行仿真

采用计算燃烧学方法对火箭发动机非线性燃烧不稳定工作过程进行了并行数值模拟。气相控制方程组用欧拉坐标系下的Navier Stokes方程组描述 ,液相控制方程组在Lagrangian坐标系下进行描述。气、液两相作用通过方程组的源项互相耦合。编制了串行和并行程序 ,并在并行计算环境下进行了测试。从计算结果可以看出并行计算的效率较高。