Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

双离合器自动变速系统动力学建模及仿真研究

在分析双离合器自动变速器的典型结构及工作原理的基础上,利用面向对象的图形化系统仿真分析软件EASY5,建立了典型湿式双离合器动力换挡的自动变速器及其控制系统的动力学模型,并与采用传统的手动变速系统的车辆对比, 进行了加速性能的仿真分析,研究了车辆换挡过渡过程中影响换挡品质的主要因素及其改进措施。为这种新型的自动变速器在我国的推广和应用研究提供了一些基本的理论依据。     

卫星地面站自动测试软件的“三化”设计

应用MVC设计模式,采用PIM应用架构,通过动态链接库和构件技术,对卫星地面站自动测试软件进行了通用化、系列化和组合化设计。     

位置随动系统动态性能自动检测研究

通过分析某型位置随动系统的组成和动态技术指标,提出了位置随动系统动态性能自动检测的设计方案和测试方法,利用信号仿真模块和基于DSP的高速数据采集与处理模块,建立了自动检测的硬件电路和软件结构,确定了测试位置随动系统的动态性能指标、测试方法和软件功能,实现了对某型位置随动系统动态性能的自动检测．     

基于ZigBee的无线火灾自动报警系统研究

基于ZigBee的技术特点,提出一种新型无线火灾自动报警系统的设计要求和设计方案.该系统弥补了现有系统的不足,并具有良好的扩展性能,为火灾自动报警系统的设计和发展提供参考.     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

在爆炸载荷作用下固支梁或筒形弯曲板的塑性动态断裂

本文运用刚塑性分析方法研究了在爆炸载荷作用下固支梁的全塑性动态断裂过程。在爆炸载荷作用下,固支梁将首先在固支端进入塑性变形,当固支端塑性铰转角达到其临界值,或固支端处初始裂纹尖端张开位移达到其临界值时(如果固支端有初始裂纹的话),固支端将产生开裂和裂纹扩展。本文解给出了在动态断裂过程中固支梁裂纹扩展长度、裂纹扩展速度以及梁的轴向约束力随时间变化的规律,并给出了不同载荷幅值下梁的启裂条件和止裂条件以及最终裂纹扩展长度和最大挠度。该分析解也适用于固支筒形弯曲板的断裂问题。     

面向 MPP Fortran 的程序自动并行化初探

ＭＰＰＦｏｒｔｒａｎ是由Ｃｒａｙ公司推出的一种较有代表性的数据并行语言,本文首先介绍了ＭＰＰＦｏｒｔｒａｎ的主要特点,然后,以该语言为例,对面向ＭＰＰ系统程序自动并行化的主要内容进行了初步的探讨。     

一个故障容错系统的设计及实现

本文提出了多路自动切换容错系统的一般概念,并对容错系统的可靠性及平均无故障时间进行了分析、计算,实现了二路自动切换容错系统.     

SPC交换程序的半自动生成技术

本文介绍我院正在研制的 SPC 交换领域用的半自动编程系统,该系统通过用规范和描述语言 SDL 书写的规范来产生 SPC 交换程序。文中讨论了半自动生成系统的基本结构,并给出一个具体的半自动生成实例。