数字视频监控系统的设计

数字式监控系统正在取代模拟视频监控系统,它是CCTV监控业的发展方向与未来,本文阐述了数字式监控系统的优越性和组成,以及数字式监控系统如何实现等问题。     

轴向输出TE10模式的紧凑型相对论磁控管的粒子模拟

研究了一种轴向输出TE10模式的紧凑型相对论磁控管,该器件采用6谐振腔结构并工作在π模式上,通过4腔轴向输出的结构设计使得谐振腔结构与矩形输出波导之间形成了较好的过渡,实现了矩形TE10模式的微波输出。与衍射输出相对论磁控管相比,这种结构设计不仅能减小磁控管的轴向和径向的尺寸,使得系统更加紧凑化,而且能在输出波导中获得更加纯净的低阶微波模式。利用粒子模拟软件,初步分析和优化了器件的工作性能。模拟结果表明:当电压为500k V,磁场为0.5T时,该器件的工作频率为2.58GHz,输出功率为1.0GW,功率转换效率达到25.0%。     

整体缝合夹芯结构复合材料力学性能

所设计的新型整体缝合泡沫夹芯复合材料结构,能够避免一般斜缝方式引起纤维交叉损坏的弊端。采用真空导入模塑工艺制备整体缝合泡沫夹芯结构复合材料,研究缝合结构、缝合方式以及缝合纱线用量对整体缝合泡沫夹芯复合材料平压力学性能和弯曲性能的影响。结果表明,新型缝合结构在保证平压力学性能的同时,相比于垂直缝合结构弯曲破坏载荷提高了94.4%;穿透缝合方式能够显著提高试样的平压强度和弯曲破坏载荷;随着缝合纱线用量的增加,整体缝合泡沫夹芯复合材料的压缩和弯曲性能显著提高。     

脉冲电抗器结构应力测量

为了对高压脉冲放电时电抗器结构受力及电流密度分布规律进行分析,使用电阻应变片对电抗器铜带进行应力测量。利用厚壁筒受压模型对应力测量系统的结果进行计算,设计内置气囊增压法来等效铜带上的应力对测量系统进行标定,并对标定实验数据进行验证。使用半桥补偿电路、屏蔽线及电桥盒共地的方法来减小脉冲电磁干扰及测量回路中寄生电阻和电容带来的电气干扰。实验结果表明:同一测量点处的环向应变峰值比轴向应变峰值大,边缘处的应变大于中心处的,需要在电抗器铜带边缘处加强外包约束。根据应力测量结果推断:铜带边缘处电流密度约为中心处电流密度的1.2倍。     

Convolutions and generalization of logconcavity: Implications and applications

Additive convolution of unimodal and α‐unimodal random variables are known as an old classic problem which has attracted the attention of many authors in theory and applied fields. Another type of convolution, called multiplicative convolution, is rather younger. In this article, we first focus on this newer concept and obtain several useful results in which the most important ones is that if is logconcave then so are and for some suitable increasing functions ?. This result contains and as two more important special cases. Furthermore, one table including more applied distributions comparing logconcavity of f(x) and and two comprehensive implications charts are provided. Then, these fundamental results are applied to aging properties, existence of moments and several kinds of ordered random variables. Multiplicative strong unimodality in the discrete case is also introduced and its properties are investigated. In the second part of the article, some refinements are made for additive convolutions. A remaining open problem is completed and a conjecture concerning convolution of discrete α‐unimodal distributions is settled. Then, we shall show that an existing result regarding convolution of symmetric discrete unimodal distributions is not correct and an easy alternative proof is presented. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 109–123, 2016     

The mechanical performance and a rate-dependent constitutive model for Al3Ti compound

The Al₃Ti compound has potential application in the high temperature structure materials due to its low density, high strength and stiffness. The mechanical behaviors of the material under different loading rates were studied using compression tests. The results indicate that Al₃Ti is a typical brittle material and its compressive strength is dependent on the strain rate. Therefore, a series of rate-dependent constitutive equations are needed to describe its mechanical behaviors accurately. However, it is still short of professional research on the material model for Al₃Ti. In this study, the material model was developed on the basis of JH-2 constitutive equations using the experimental data. The model was then applied in simulating the impact process of Ti/Al₃Ti metal-intermetallic laminate composites so as to validate the established model. Good agreement between simulation and experiment results shows the constitutive model predict the material responses under high rate and large deformation accurately. This work provides more support for the theoretical and numerical research on the intermetallic.     

基于块分类的快速分形图像压缩

针对分形图像压缩编码时间长的问题 ,提出基于块分类的分形图像压缩算法 ,实验结果表明 ,该方法相对于经典的Jacquin分形图像压缩算法 ,压缩比得到提高 ,压缩时间提高近 10 0倍。     

Ni-Co-P／导电聚苯胺复合材料电磁和红外性能

采用化学镀对高氯酸掺杂聚苯胺（PANI/HClO4）粉体进行Ni-Co-P合金化改性,改性材料磁损耗因子得到提高。进行红外光谱分析,PANI/HClO4在3-5μm和8-14μm 2个大气窗口没有强吸收峰,具有雷达红外隐身兼容特性。     

多排式轴向柱塞液压马达缸体的关键技术研究

在总结国内外单排式轴向柱塞液压马达研究成果的基础上,结合多排与单排式轴向柱塞马达之间的异同,对多排式轴向柱塞马达的缸体结构模型进行分析,并以双排式轴向柱塞马达为例,研究了双排式轴向柱塞马达缸体设计的关键技术,采用参数化公式推导出双排式轴向柱塞马达缸体结构的理论设计公式,建立了双排式轴向柱塞马达缸体的数学模型。为多排式轴向柱塞马达关键技术的进一步研究提供了重要的理论依据。     

短消息传送GPS位置数据的高效数据压缩方法

车务管理信息化系统中需要将战车行驶中的运动位置数据通过移动短消息方式定时向管理中心传送。受短消息数据包容量的限制,每条短消息可携带的车辆GPS位置数据量有限。少量的GPS位置数据难以重现车辆运动轨迹,但频繁发送短消息,费用又较高。为满足车辆运行轨迹重现所需大量密集车辆位置数据的需求,提出了一种专用于车辆位置数据压缩传输方法,可使传送数据量提高30多倍,解决了频繁发送车辆位置短消息费用高的问题,已应用到车辆动用管理系统中。