The “signature” of a coherent system and its application to comparisons among systems

Various methods and criteria for comparing coherent systems are discussed. Theoretical results are derived for comparing systems of a given order when components are assumed to have independent and identically distributed lifetimes. All comparisons rely on the representation of a system's lifetime distribution as a function of the system's “signature,” that is, as a function of the vector p= (p₁, … , p_n), where p_i is the probability that the system fails upon the occurrence of the ith component failure. Sufficient conditions are provided for the lifetime of one system to be larger than that of another system in three different senses: stochastic ordering, hazard rate ordering, and likelihood ratio ordering. Further, a new preservation theorem for hazard rate ordering is established. In the final section, the notion of system signature is used to examine a recently published conjecture regarding componentwise and systemwise redundancy. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 507–523, 1999     

Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere

To optimize the energy output and improve the energy utilization efficiency of an aluminized explosive, an explosion device was developed and used to investigate the detonation pressure and temperature of R1 (Al6) aluminum powder and the aluminum powder particle gradation of R2 (Al6+Al13), R3 (Al6+Al24) and R4 (Al6+Al flake) in a confined space. By using gas chromatography, quantitative analysis and calculations were carried out to analyze the gaseous detonation products. Finally, the reaction ratios of the aluminum powder and the explosion reaction equations were calculated. The results show that in a confined space, the quasi-static pressures and equilibrium temperature of the aluminum powder in air are higher than in vacuum. In vacuum, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R3>R4>R2 and R3>R4>R1>R2, respectively. In air, the quasi-static pressures and equilibrium temperatures of the samples in descending order are R1>R2>R4>R3 and R1>R4>R2>R3, respectively. R4 (Al6+Al flake) and R3 (Al6+Al24) have relatively higher temperatures after detonation, which shows that the particle gradation method can enhance the reaction energy output of aluminum during the initial reaction stage of the explosion and increase the reaction ratio by 10.6% and 8.0%, respectively. In air, the reaction ratio of Al6 aluminum powder can reach as high as 78.16%, and the reaction ratio is slightly reduced after particle gradation. Finally, the reaction equations of the explosives in vacuum and in air were calculated by quantitative analysis of the explosion products, which provides a powerful basis for the study of RDX-based explosive reactions.     

高超声速变形飞行器翼面变形模式分析

为提高高超声速翼身组合式飞行器的射程,研究了采用不同翼面变形模式时,飞行器在马赫数3~8内的气动特性和翼面效率。针对典型的轴对称翼身组合式外形,采用Navier-Stokes方程进行数值模拟,对伸缩、变后掠和二维折叠三种变形模式下的外形在超声速及高超声速来流条件下进行模拟,并对升阻比、翼面单位面积升阻比和操稳特性进行分析。结果表明:在超声速及高超声速范围内,变后掠变形模式在宽速域内升阻比提高明显,同时具备优良的翼面效率及操稳特性,其在马赫数3~8范围内具有最优的综合性能。研究成果能对高超声速翼身组合式变形飞行器布局设计提供参考,具有一定的指导意义。     

利用复单脉冲比的平面阵列雷达群目标检测方法

针对平面阵列雷达群目标检测问题,以矩形阵为例,详细分析方位向和俯仰向复单脉冲比虚部的统计特性;建立平面阵列雷达群目标检测模型,根据恒虚警检测原理推导复单脉冲比虚部的椭圆判决域,并利用复单脉冲比实部辅助判决,综合提出基于复单脉冲比的平面阵列雷达群目标检测算法。针对双目标情形进行仿真实验,结果表明:在较高信噪比、较大角度间隔以及幅度相当且相位差较大的条件下算法能够有效检测群目标。     

导弹静电放电效应及其防护装置应用研究

静电防护是导弹研制的刚性要求.简述了导弹发生静电荷沉积的主要途径,介绍了导弹静电放电的3种典型形式,基于相关典型试验和实测数据,分析了静电放电电流效应和静电放电电磁脉冲效应对导弹可感测辐射信号和系统信噪比的不同作用效能,研究了导弹安装静电放电器前后对安全性和功能性能的影响,介绍了静电放电器的典型应用方式,综合论证了导弹...     

基于细分小波的图像压缩算法研究

层次细节模型LOD(Level of detail)和感兴趣区域模型ROI(Region of Interesting)是静止图像压缩及网络传输技术中两个重要模型.通过将灰度图像网格化,并在图像网格上进行B样条细分小波变换,实现了图像的LOD压缩算法.并通过Gouraud明暗处理技术将网格还原成压缩过的灰度图像;同时,该算法还可方便地通过ROI区域选择,使ROI区域比背景区域获得更好的图像质量.     

试件水灰比和胶砂比对混凝土硫酸盐侵蚀速度影响

通过大量试验,采用强度指标研究了试件水灰比和胶砂比对硫酸盐侵蚀速度的影响.结果表明:试件的水灰比越大,胶砂比越小,侵蚀速度越快;为了加快硫酸盐侵蚀速度,宜采用大水灰比、小胶砂比的试件.在各种条件下,硫酸钠侵蚀破坏的速度比硫酸镁侵蚀快.对硫酸钠型侵蚀,采用抗折抗蚀系数作为判定指标较为合理,而对硫酸镁型侵蚀,应该综合考虑抗折抗蚀系数和抗压抗蚀系数.     

高超声速飞行器前体外形设计与气动特性分析

利用数值计算开展了高超声速飞行器前体气动特性的考察,重点研究了三维效应对于前体流场及预压缩性能的影响,提出了抑制三维侧缘溢流影响、改善三维前体气动性能的前体侧缘设计思想,考察了侧缘外形的容积效率,提出了有效容积效率的概念和评估方法,对于不同侧缘形式的前体构型进行了气动特性的考察,给出了不同前体构型气动特征的变化规律。     

基于辐照度标准传递的辐亮度校准系统

介绍了一种新型辐亮度校准系统,通过溯源至国家辐照度标准,构建了军用光辐射校准平台。对系统的测量不确定度分析表明,该系统可以满足装备计量保障对测试不确定度比的通用要求,适用于装备专用检测设备的辐亮度校准。     

面向脉冲压缩雷达的灵巧噪声干扰方法研究与仿真分析

针对脉冲压缩雷达,研究了基于卷积调制、乘积调制的灵巧噪声干扰仿真分析方法。该方法基于数字射频存储（DRFM）技术,将干扰机接收并存储的雷达发射信号与噪声信号进行卷积、乘积调制后转发出去,为干扰信号的产生提供了有效途径。仿真实验证明该方法能有效干扰脉冲压缩雷达,同时具有压制性干扰和欺骗性干扰的效果。