基于面向对象技术的载人长征二号F应急救生半实物仿真系统

概要介绍了基于面向对象技术的长征二号F火箭应急救生半实物仿真系统的组成和应用.     

WINDOWS系统中的QoS保障机制研究

针对微软提出的常规服务质量(GeneralQualityofService,简称GQoS)的QoS解决方案,讨论了WINDOWS系统中的QoS保障机制。通过WINSOCK2的API函数设计程序,进行了Win98上的QoS性能测试。结果表明,在QoS启用的情况下,数据的传输时间和延迟抖动明显减小,说明WINDOWS系统中的QoS保障机制有效。     

Sr2FeNbO6的晶体结构

系统地研究了Sr2FeNbO6的晶体结构,并利用步进扫描的X光数据成功地确定了Sr2FeNbO6的晶体结构,利用Rietveld方法精修出Sr2FeNbO6是空间群为Pnma(62)的正交结构,其中,晶胞参数分别为a=5.616 1A,b=7.971 7A,c=5.613 0A.     

热图像与瞄准镜分划图像实时叠加处理系统研究

热像仪是夜战中用于观察和瞄准的重要装备,但目前装备的某些坦克和装甲车辆上的热像瞄准镜,本身并不具有瞄准分划,因而也就很难获取目标更多的信息,限制了对目标进行有效的瞄准射击:为了使其热像瞄准镜同样具有坦克微光瞄准镜所具有的功能,作者利用高速数字信号处理器ADsP21535开发评估板,研究设计了热图像和瞄准镜分划图像实时叠加处理系统,从而较好的解决上述问题.     

Background dominant colors extraction method based on color image quick fuzzy c-means clustering algorithm

A quick and accurate extraction of dominant colors of background images is the basis of adaptive camouflage design. This paper proposes a Color Image Quick Fuzzy C-Means (CIQFCM) clustering algorithm based on clustering spatial mapping. First, the clustering sample space was mapped from the image pixels to the quantized color space, and several methods were adopted to compress the amount of clustering samples. Then, an improved pedigree clustering algorithm was applied to obtain the initial class centers. Finally, CIQFCM clustering algorithm was used for quick extraction of dominant colors of background image. After theoretical analysis of the effect and efficiency of the CIQFCM algorithm, several experiments were carried out to discuss the selection of proper quantization intervals and to verify the effect and efficiency of the CIQFCM algorithm. The results indicated that the value of quantization intervals should be set to 4, and the proposed algorithm could improve the clustering efficiency while maintaining the clustering effect. In addition, as the image size increased from 128 × 128 to 1024 × 1024, the efficiency improvement of CIQFCM algorithm was increased from 6.44 times to 36.42 times, which demonstrated the significant advantage of CIQFCM algorithm in dominant colors extraction of large-size images.     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

基于改进噪声检测的迭代中值滤波算法

提出了一种基于改进噪声检测的迭代中值滤波算法。该算法首先检测出噪声点,然后利用信号点对噪声点滤波。其中噪声检测方法改进了IMFLED方法,进一步降低了误检率和漏检率。经过仿真实验并与其他滤波算法进行比较表明,该算法可以有效地去除图像中的脉冲噪声并且保留原图像的细节。     

非晶态Ni-P合金化学镀镀液的稳定性研究

采用PdCl2溶液的稳定性试验方法,对非晶态Ni-P合金化学镀镀液(ZFHN防腐蚀镀液)的稳定性和试验条件进行了关系曲线测试及分析.规定和提出了其试验条件和最佳控制参数;试验镀液中PdCl2的最佳浓度是2.4 mg/L、可靠的pH值范围为4.0～5.0.温度、搅拌、PdCl2用量、镀液pH值是决定镀液稳定时间的重要试验条件和试验偏差大的主要因素.研究镀液的稳定性高、组分协同稳定性好,稳定试验时间大于3 min.     

Al2O3催化氧化脱除GB染毒空气的研究

以浸渍法制备的10%V／Al2O3为催化剂,研究对GB染毒空气的脱除效果,考察接触时间、温度、温度和浓度等因素对GB染毒空气脱除效果的影响,用GC-MS和LC-MS对尾气组分进行了检测分析．     

一种新型甲醛气体清除材料的实验研究

采用溶胶-凝胶法将纳米TiO2负载在活性碳纤维上,制备出一种新型甲醛气体清除材料。在制备中依次掺杂Fe3+和十二烷基苯磺酸钠(SDBS)对纳米TiO2进行改性,研究了纳米TiO2光催化活性的变化,并测试了自制材料的甲醛清除效率。结果表明:Fe3+和SDBS的添加不会改变纳米TiO2的晶型结构,但有利于晶粒的成长和负载膜的光催化活性;添加体积分数分别为0.8%的Fe3+和3%的SDBS时,材料的甲醛清除效率最高。