脉冲末修弹落点预测导引方法研究

在分析剩余射程影响因素的基础上,以弹道特征参数弹道高y及速度矢量分量Vx和Vy为解释变量,以回归分析方法为数学工具,建立脉冲末修弹剩余射程预测模型。以目标点与弹丸预测落点之间的差值为广义弹道偏差,结合数值仿真,对落点预测导引进行深入研究,验证了回归分析模型的可行性。     

采用弹道修正技术的红外干扰弹性能优化

针对弹道修正弹的高维非线性特性导致的性能优化难题,改变概念设计阶段传统的串行设计方式,提出了一种基于实验设计(Design Of Experiments,DOE)和响应面(Response Surface Methodology,RSM)的智能优化算法,定义基本的弹丸结构模型以及相关的设计参数.在DOE的基础上,将设计...     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

弹道导弹打击航空母舰末制导有效区的确定与评估

在地地弹道式导弹与航空母舰攻防对抗中,需要研究航母是否在导弹进攻的有效区内。针对具有末制导的弹道式导弹具有再入机动变轨特性,建立了导弹再入机动飞行模型,提出了导弹在不同的再入条件下,对其飞行弹道及机动能力进行仿真计算的方法,通过仿真确定出了导弹打击航空母舰的有效区域。在此基础上,探讨了导弹在以不同的再入姿态、不同的再入飞行高度实施末制导时,导弹落点的有效区域、边界外形及有效区的变化范围。从所得结果来看,所建模型及仿真方法正确可行,在一定程度上解决了弹道导弹打击航空母舰战斗群作战保障急需解决的一些问题。     

弹道导弹打击航空母舰末制导寻的方法研究

在弹道导弹与航母战斗群的攻防对抗中,弹道导弹需要采用有效的寻的方法以便在对抗中占优势。通过分析航母的运动特性,建立了预测其运动态势的数学模型;在此基础上,采用预测落点的末制导方法,在导弹弹头再入大气层后,通过多次预测和修正,实时修正由于航母运动和再入过程中大气影响等各种干扰因素所引起的落点偏差,以保证弹头能以较好的精度命中目标。从数字仿真结果来看,该方法成功率高,且制导精度较高,具有较强的工程应用价值。     

基于仿真实验的弹道导弹阵地优选

合理部署弹道导弹位置对于提高作战效能具有至关重要的作用。基于解析计算的优化方法难以反映环境因素、武器装备的技术和动力特性等不确定性因素对部署位置的影响,求得的结果存在置信度低的问题。故将解析法与仿真实验相结合,以体系对抗条件下弹道导弹作战效能评估的数学模型为基础,建立了由各种作战实体和行动的模型聚合而成的弹道导弹攻防对抗仿真模型,然后通过仿真实验找出最优部署位置,最后给出了应用示例。实验表明该方法具有速度快、效率高、结果清晰直观的特点,可为指挥员提供科学、快速的决策支持。     

弹道导弹中段拦截产生的空间碎片影响分析

针对弹道导弹中段拦截产生的空间碎片可能对在轨航天器的影响进行了分析,弹道导弹中段拦截产生的空间碎片的质量、速度和运行时间都很有限,本质上为亚轨道残骸,不会对在轨航天器造成重大影响,对在轨航天器的威胁主要来自流星和以往空间任务产生的轨道残骸.     

Damage behavior of the KKV direct hit against fluid-filled submunition payload

The damage effects of fluid-filled submunition payload impacted by the kinetic kill vehicle (KKV) are investigated by simulations and ground-based experiments. Numerical simulations showed that the damage level and number of submunitions were significantly influenced by the diameter of the KKV compared with its length. Based on that, a high velocity penetrator formed by shaped charge explosion was used to simulate the direct hit experiment of a KKV impacting submunition payload. Experimental results demonstrated that the damage modes of submunitions mainly included the slight damage, perforation and total smash, showing a good agreement with the simulations. To understand the multiple damage modes of submunitions, the damage behavior of the submunitions in direct hit process were analyzed based on the AUTODYN-3D code. Numerical results presented that increased KKV diameter can increase the crater diameter and expand the damage volume, which will achieve a higher direct hit lethality. Further analysis indicated that there were other mechanical behaviors can enhance the damage to submunitions not lying in the KKV flight path, such as secondary debris kill, neighboring submunitions collision with each other, and high-speed fluid injection effect.     

弹道修正弹射程偏差预测与阻力板展开时机优化

根据弹道修正弹阻力板的展开控制对于射程偏差预测要求的实时性,提出基于摄动原理的射程偏差预测算法.为解决阻力板修正能力在线计算数据量大的问题,提出在弹载计算机上装定阻力板修正能力表格的方法,给出发射前计算修正能力表格的过程和飞行中使用修正能力表格的步骤,提出阻力板展开时机的优化判断条件,并采用该方法对某型弹道修正火箭弹射程修正控制进行仿真试验和飞行试验.仿真试验结果表明,当目标射程为33 565.4m时,经修正后火箭弹的射程偏差能控制在20m以内;飞行试验结果表明,弹道修正火箭弹的射程偏差实测为24m,射程精度得到明显提高.