弹道导弹突防数概率分布列计算模型

针对双层反导防御系统,在单枚导弹突防概率的基础上,分别建立了多枚战术弹道导弹突破单层和双层拦截的最终突防数概率分布列计算模型,同时进行了算例分析,对模型进行了验证.     

Fabrication and characterization of Al-CuO nanocomposites prepared by sol-gel method

In this study, Al-CuO nanocomposites were fabricated by sol-gel method. As a contrast, the thermite was prepared by physical mixing at the equivalence ratio of 0.5, 1, 2, respectively. The intermediates and samples as prepared were characterized by SEM and XRD. The exothermic properties of the two samples prepared at different equivalence ratios were tested and the reaction products were characterized by XRD. The SEM results show that the sample prepared by the sol-gel method demonstrates a micron-sized agglomerated sphere formed by a mutual wrapping of Al NPs and CuO NPs, and the particles are evenly distributed in the agglomerate. In addition, when the content of Al powder is seriously insufficient, the heat release of the sample prepared by physical mixing is 1.6 times that of by sol-gel method. With the increase of Al powder content, the exothermic properties of Al/CuO NPs prepared by sol-gel method began to increase significantly compared with physical mixing and the difference is 1.5 times when the equivalence ratio increases to 2. It can be concluded that the reason for this result may be attributed to the different mass transfer modes of components due to the different morphologies of samples.     

装备物资混装配载效益化特征聚类分析

提出了通过对物资聚类分组来分步解决混装配载问题的思想,分析了装备物资混装配载中物资分类的办法,讨论了使用聚类分析法研究分类问题的特点,给出了一种基于系统聚类法的物资效益化特征分组方法。     

自蔓延高温合成技术的研究动态

对自蔓延高温合成技术(SHS)的最新研究动态进行了介绍,指出SHS技术作为一种制备和合成材料的新技术,以其高效、节能、经济、材料性能优良等优点,现已成为制备新材料的崭新途径,并提出自蔓延高温合成技术今后的研究方向。     

反导动能拦截武器的现状与发展研究

介绍了动能拦截弹在弹道导弹防御中的应用,分助推段拦截、中段拦截、末段拦截对美国发展的动能拦截武器进行了详细说明。介绍了动能拦截弹的组成,给出了动能拦截器的关键技术,对动能拦截器技术的发展进行了阐述。     

高硬热喷涂层的缓进给切削试验

采用高硬材料切削过程中常用的2种刀具材料CBN和YG610,应用缓进给的模式对高硬喷涂层进行切削试验。试验结果表明：采用小进给切削模式YG610刀具切削高硬热喷涂层可以获得较理想的刀具耐用度,并且加工表面质量可以达到Ra1以下,具备了以车代磨的基本条件。高硬材料切削常用的刀具CBN在切削过程中出现了较严重的非正常破损现象。通过对试验现象的分析,可以认为冲击性和高硬度的同时存在是喷涂层切削的最重要特性。因此,喷涂层切削刀具需要同时具备较高的韧性和硬度。     

基于典型弹道的反导导弹制导方式分析

针对典型的导弹弹道仿真,通过对反导导弹的几种备选制导律进行了参数调试和数字仿真,设计了初、中制导方案,通过数字仿真给出了弹道规划,明确了允许的发射条件。同时,分析了各方案主要的制导信息误差及其影响,针对高斯噪声误差模型提出了制导信息误差指标。最终确定了较优制导方案。该方案经数字仿真验证具有较优的攻击区性能,攻击区较大、发射条件约束较为宽松,以当前的技术水平有望实现。     

“E体化”军事物流的建设与发展

根据未来高技术战争和信息技术的发展趋势,提出了建设"E体化"军事物流的宏观战略构想,论述了"E体化"军事物流的理论内涵和现实意义,明确提出了"E体化"军事物流的战略目标以及目标实现的关键基础体系.     

BP神经网络的弹道导弹态势等级模型

针对弹道导弹的目标特性和作战特点,对主要态势指标进行了提取,构建了基于BP神经网络的态势等级模型,并按照区间对预警等级进行划分。为提高模型的准确性和适应性,通过样本数据对BP网络进行了训练,并进行了仿真得到了态势等级。仿真结果表明:利用BP神经网络对态势等级进行研究是可行的。     

The symbolic politics of ballistic missile defense: seeking the perfect defense in an imperfect world

Ballistic missile defense (BMD) politics present an interesting evolution in how the USA, especially Congress, has come to think about BMD both as operational reality and as a symbolic policy. The argument here is that BMD's operational reality is increasingly overshadowed by its symbolic aspects. Such a status arose from rapidly changing international and domestic politics. The end result is a situation in which BMD policy in a sense floats above the question of its actual combat effectiveness. Its primary mission in part is sustaining US capacity to remain a global power and support its allies.