建筑内装修防火材料见证取样检验工作存在问题及对策

阐述了建筑内部装修防火材料见证取样检验的意义,分析了目前此项工作的现状和存在问题,提出了下一步的对策。     

非标准气象条件弹道自动修正的研究

针对某强击机瞄准具轰炸性能改进装置,介绍非标准气象条件下弹道修正原理工作式的建立、修正电路的设计及其与瞄准具的交联关系     

弹道导弹基本诸元的快速装订算法研究

应用牛顿迭代法实现了弹道导弹基本诸元的快速装订。推导了根据落点偏差求飞行程序角和发射方位角的牛顿迭代公式，设计了迭代算法，并给出了实际算例。考虑到迭代算法收敛速度与所给的迭代初值有一定的关系，提出了预先准备简易射表采用反插值算法为牛顿迭代法准备初值的方法，经计算表明可以大大减少迭代次数，从而实现标准弹道的快速设计。     

矩形腔内相变材料上下加热时接触熔化的研究

本文对矩形腔内相变材料的紧密接触熔化过程进行了分析。矩形容器的上下壁面保持各自的温度对相变材料加热,且相变材料可以有不同的高宽比。应用Nusselt液体边界层理论,本文求得了传热过程的熔化规律与液体边界层厚度,并讨论了熔化温差与高宽比对熔化过程的影响,最后给出结论。     

Analysis for the residual prestress of composite barrel for railgun with tension winding

Based on the elastic theory of cylindrical shells and the theory of composite laminates, a prediction model for the residual prestress of the simplified round composite barrel for railgun is established. Only the fibre pretension is considered in this model. A three dimensional numerical simulation for the residual prestress in the railgun barrel is carried out, by combining the temperature differential method with the element birth and death technology. The results obtained by the two methods are compared. It reveals that the distribution trends of residual prestress are consistent. And the difference for residual prestress in the filament wound composite housing of barrel is relatively small. The same finite element method is used to analysis the residual prestress in the non-simplified composite barrels for railgun, which are under different control modes of winding tension. The results mean that the residual prestress in barrel will increase while the taper coefficient for winding is decreasing. Therefore, the sealing performance in bore is improved, but the strength of the filament wound composite housing drops. In addition, the axial and circumferential residual prestress in the filament wound composite housing with constant torque winding are close to the ones in iso-stress design for barrel.     

Body armour – New materials,new systems

This is a very timely review of body armour materials and systems since new test standards are currently being written, or reviewed, and new, innovative products released. Of greatest importance, however, is the recent evolution, and maturity, of the Ultra High Molecular Weight Polyethylene fibres enabling a completely new style of system to evolve – a stackable system of Hard Armour Plates. The science of body armour materials is quickly reviewed with emphasis upon current understanding of relevant energy-absorbing mechanisms in fibres, fabrics, polymeric laminates and ceramics. The trend in on-going developments in ballistic fibres is then reviewed, analysed and future projections offered. Weaknesses in some of the ceramic grades are highlighted as is the value of using cladding materials to improve the robustness, and multi-strike performance, of Hard Armour Plates. Finally, with the drive for lighter, and therefore smaller, soft armour systems for military personnel the challenges for armour designers are reported, and the importance of the relative size of the Hard Armour Plate to the Soft Armour Insert is strongly emphasised.     

Reactor-grade plutonium and nuclear weapons: ending the debate

The claim that reactor-grade plutonium cannot or will not be used to produce nuclear weapons has been used to justify non-nuclear-weapon states’ large stockpiles of plutonium that has been separated from highly radioactive spent fuel. However, by using reduced-mass plutonium cores, it is possible to manufacture reliable nuclear weapons with reactor-grade plutonium. These weapons can have the same design, size, weight, and predetonation probability as weapons using weapon-grade plutonium and would require no special cooling. The increased radiation from reactor-grade plutonium could be easily managed by shielding and operational procedures. Weapons using plutonium routinely produced by pressurized-water reactors could have a lethal area between 40 percent and 75 percent that of weapons using weapon-grade plutonium. In the past, both Sweden and Pakistan considered using reactor-grade plutonium to produce nuclear weapons, and India may be using reactor-grade plutonium in its arsenal today. Despite claims to the contrary, the United States used what was truly reactor-grade plutonium in a successful nuclear test in 1962. The capability of reactor-grade plutonium to produce highly destructive nuclear weapons leads to the conclusion that the separation of plutonium, plutonium stockpiling, and the use of plutonium-based fuels must be phased out and banned.     

电磁发射弹丸飞行弹道仿真

针对电磁发射弹丸飞行弹道进行仿真研究,在建立刚体六自由度飞行弹道模型的基础上,采用时频分析和涡流分析方法,建立电磁-动力学耦合模型分析弹丸出膛时由于膛内振动带来的炮口扰动,采用动网格技术建立电磁-气动耦合模型分析弹托分离产生的气动扰动,从而得到了电磁发射弹丸的飞行弹道模型。以得克萨斯大学先进技术研究所设计的IAT-HVP为例,仿真分析了弹丸以1117 m/s初速、0°射角出膛时弹丸出口扰动对弹体速度和气动特性的影响,并得到其飞行200 m的弹道曲线。仿真结果表明,受电磁发射一体化弹丸出口扰动的影响,弹体落点相比理想弹道产生了24%的偏差,其中炮口扰动引起的偏差最大,其次是弹托分离。     

具有旁侧视声纳鱼雷攻击末弹道研究

为了实现具有旁侧视声纳鱼雷攻防对抗单一目标的模拟仿真,利用力学与现代数学的方法,建立了具有旁侧视声纳鱼雷攻防对抗单一目标的弹道设计动力学模型与运动学模型,并以此建立了鱼雷导引弹道段、平行航向弹道段和程序弹道段的数学模型,该模型的建立可以实现鱼雷攻击末弹道的仿真研究.     

压电材料中的共线非等长多裂纹问题

建立了横观各向同性压电材料中的共线非等长多裂纹模型。将裂纹模拟为连续分布的广义位错,推导了单点广义位错的格林函数,并基于此得到了共线非等长多裂纹的奇异积分方程组,最后由数值计算给出了裂纹尖端的能量释放率。对奇异积分方程组的退化分析和对称条件下的数值结果的讨论,验证了本文结果的正确性。研究表明:当共线裂纹间距小于裂纹长度时,裂纹尖端场存在显著的干涉效应;裂纹越长,干涉效应越显著;电载荷系数越大,能量释放率也越大;相对于外侧尖端而言,共线裂纹内侧尖端对电载荷系数更为敏感。