不同结构拦截弹的毁伤能力研究

在电磁发射器发射拦截弹撞击来袭目标的过程中,拦截弹的结构材料参数是影响拦截弹加速性能及毁伤能力的一个重要因素。在实验中常用的铝合金材料拦截弹基础上,提出铝-钢、铜-钢2种复合拦截弹结构,以拦截弹与钨合金杆式穿甲弹的碰撞过程为例,对3种拦截弹对来袭目标的毁伤能力进行对比分析。     

Weapon effectiveness and the shapes of damage functions

This paper provides a review of methods of assessing a fragmentation weapon's effectiveness against a point target or an area target with keeping the focus on the necessity of using the Carleton damage function with the correct shape factor.First,cookie-cutter damage functions are redefined to preserve the shape factor of and to have the same lethal area as the corresponding Carleton damage function.Then,closed-form solutions of the effectiveness methods are obtained by using those cookie-cutter damage functions and the Carleton damage function.Finally,the closed-form solutions are applied to calculate the probability of damaging a point target and the expected fractional damage to an area target for several attack scenarios by using cookie-cutter damage functions and the Carleton damage functions with different shape factors.The comparison of the calculation results shows that using cookie-cutter damage functions or the Carleton damage function with a wrong shape factor results in quite signifi-cant differences from using the original Carleton damage function with a correct shape factor when weapon's delivery error deviations are less than or comparable to the lengths of the lethal area and the aim point is far from a target.The effectiveness methods improved in this paper will be useful for mission planning utilizing the precision-guided munitions in circumstances where the collateral damage should be reduced.     

某型多管火箭炮射击精度对重复毁伤影响

基于射击学理论和毁伤理论,采用矩阵法,建立了某型多管火箭炮射击的重复毁伤分析模型,研究了该型多管火箭炮射击误差对重复毁伤的影响,得出了射击诸元误差和射击散布误差变化对重复毁伤影响的具体规律和二者之间的不同。研究结论对于弹道修正火箭弹设计精度指标确定、弹药消耗规律研究及作战指挥决策具有参考意义。     

核武器毁伤概率pij计算的一种改进方法

在核火力运用研究的最优瞄准点选择计算中 ,核武器对目标毁伤概率 pij的计算是至关重要的。在 Gauss-L egendre求积方法的基础上 ,提出计算核武器毁伤概率 pij的一种改进方法 ,经计算证明 :此方法计算速度快且精度高。     

Damage visualization and deformation measurement in glass laminates during projectile penetration

Transparent armor consists of glass-polymer laminates in most cases. The formation and propagation of damage in the different glass layers has a strong influence on the ballistic resistance of such laminates. In order to clarify the course of events during projectile penetration, an experimental technique was developed, which allows visualizing the onset and propagation of damage in each single layer of the laminate. A telecentric objective lens was used together with a microsecond video camera that allows recording 100 frames at a maximum rate of 1 MHz in a backlit photography set-up. With this technique, the damage evolution could be visualized in glass laminates consisting of four glass layers with lateral dimensions 500 mm × 500 mm. Damage evolution was recorded during penetration of 7.62 mm AP projectiles with tungsten carbide core and a total mass of 11.1 g in the impact velocity range from 800 to 880 m/s. In order to measure the deformation of single glass plates within the laminates, a piece of reflecting tape was attached to the corresponding glass plate, and photonic Doppler velocimetry (PDV) was applied. With the photonic Doppler velocimeter, an infrared laser is used to illuminate an object to be measured and the Doppler-shifted light is superimposed to a reference light beam at the detector. The simultaneous visualization and PDV measurement of the glass deformation allow determining the deformation at the time of the onset of fracture. The analysis of the experimental data was supported by numerical simulations, using the AUTODYN commercial hydro-code.     

一种快速评定通信设备战损等级的方法

为解决通信设备战损等级评定中存在的问题,快速且准确地做出评定,提出了利用BP神经网络进行战损等级评定.在总结战损等级影响因素的基础上,建立了通信设备战损等级评定神经网络模型.经检验,该模型用于战时通信设备战损等级评定准确度高,具有很强的军事意义.     

THE CREEP-DAMAGE MODELING CORRELATED TO TEMPERATURE FOR COMPOSITE SOLID PROPELLANT

ＴＨＥＣＲＥＥＰ－ＤＡＭＡＧＥＭＯＤＥＬＩＮＧＣＯＲＲＥＬＡＴＥＤＴＯＴＥＭＰＥＲＡＴＵＲＥＦＯＲＣＯＭＰＯＳＩＴＥＳＯＬＩＤＰＲＯＰＥＬＬＡＮＴＳｈｅｎＨｕａｉｒｏｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＡｅｒｏｓｐａｃｅＴｅｃｈｎｏｌｏｇｙ,１０８Ｌａｂｏ...     

A BENDING DAMAGE THEORY FOR BEAMS UNDER PURE BENDING LOADS

ＡＢＥＮＤＩＮＧＤＡＭＡＧＥＴＨＥＯＲＹＦＯＲＢＥＡＭＳＵＮＤＥＲＰＵＲＥＢＥＮＤＩＮＧＬＯＡＤＳＹａｎｇＧｕａｎｇｓｏｎｇ;ＬｕＹｉｎｃｈｕ;ＪｉｎＸｉｎ（ＤｅｐａｒｔｍｅｎｔｏｆＡｅｒｏｓｐａｃｅＴｅｃｈｎｏｌｏｇｙ,ＮＵＤＴ,Ｃｈａｎｇｓｈａ,...     

某型火箭弹对巡航导弹毁伤概率仿真分析

通过对巡航导弹目标特性分析,论述了目标易损性和毁伤机理(包括破片战斗部对目标的击穿概率模型)。利用破片初速及存速计算模型,分析了战斗部爆破后破片速度衰减规律,并做了模拟仿真,为火箭弹战斗部设计及毁伤效能评估提供了理论依据。最后根据射弹散布规律及毁伤原理建立了毁伤模型,并以某型火箭弹为例,对毁伤概率模型进行了仿真分析。仿真结果表明:该方法为火箭弹战斗部设计和提高对巡航导弹毁伤概率提供了参考。     

切向空气气流对激光辐照碳纤维复合材料的影响

实验研究了靶材表面存在和不存在切向空气气流时,975nm连续激光对碳纤维增强树脂基复合材料的辐照效应,发现切向气流的加载有利于激光对碳纤维复合材料的破坏.从理论上对激光辐照下碳纤维复合材料的破坏机理进行了初步分析,基于碳的氧化特性和氧化反应机理,推导了碳纤维的氧化速率方程.采用改进的光滑粒子方法,对激光辐照下复合材料树...