军人心理训练的实证研究及其思考

军人心理训练,作为一种将心理训练与战斗力相结合的新型训练模式,是军人提升心理能力、培育素质素养的重要途径。通过概述军人心理训练的内涵和方法,梳理实证研究的研究现状,为拓展军人心理训练领域研究、深化训练应用实效提出思考。     

基于ANSYS的油罐拱顶与罐壁关联性分析

针对油罐拱顶与罐壁上部容易出现失稳变形的实际问题,基于ANSYS建立了油罐有限元模型,对油罐结构稳定性进行数值模拟,探讨加载关联性和结构关联性对均匀外压作用下油罐稳定性的影响。结果表明:分析油罐结构稳定性时,对于给定尺寸的油罐,失稳发生在结构较薄弱部位;拱顶和罐壁可独立加载求解临界载荷,取较小值作为油罐的临界载荷;油罐的失稳分析要考虑拱顶与罐壁间相互作用对总体临界载荷的影响。研究结果可为基于有限元法的油罐稳定性设计和分析提供一定参考。     

高渗高强混凝土材料强度特性试验及参数确定

高渗高强混凝土是一种兼具高渗透性和高强度的新材料,用在离壁式地下工程中既能确保通畅地排除围岩周边地下水,又能提高地下工程结构自身的强度,充分发挥其减震层的作用。通过正交试验得出影响材料单轴抗压强度与抗劈裂强度的4个因素的排序,结果显示:对抗压强度与抗劈裂强度影响最大的2个因素是灰集比与水灰比,聚灰比对抗劈裂强度的影响也较为明显。从材料一点的三向应力状态出发,通过对试验结果的计算得到岩土工程中广泛运用的内摩擦角和黏聚力等强度参数,经回归分析发现材料的黏聚力与抗压强度之间符合线性增长关系,该结果可以直接为岩土工程数值计算中的数据应用提供依据。     

PDSC评定柴油氧化安定性

为研究一种操作简便、检测快速的柴油氧化安定性评定方法,采用高压差示扫描量热法(PDSC)对柴油氧化安定性进行评定,通过单因素变量法分析了升温速率、恒容氧压、试样量对柴油氧化安定性的影响,确定了3种因素水平分别为8~12℃/min,2.5~4.5 MPa,2.5~3.5 mg。通过正交试验法得出升温速率对柴油氧化安定性的影响最大,恒容氧压的影响最小。方差分析表明在升温速率为8℃/min,恒容氧压为3.5 MPa,试样量为3.0 mg时,试验方法的区分性最佳。在该试验条件下,考察了5种油样的重复性,结果表明PDSC法的重复性满足标准要求。     

三维均匀化理论预测多孔混凝土等效弹性模量

应用多尺度渐进展开的均匀化理论,推导三维均匀化理论的有限元解法,求解复合材料等效弹性系数。假设多孔混凝土由光滑均匀一致的球孔与水泥石基质组成,提出改进的随机投放方法,生成三维均匀化理论求解的随机单胞模型。以聚苯乙烯泡沫(EPS)混凝土为数值算例,生成6组不同体积分数的EPS混凝土随机单胞模型,通过三维均匀化理论的有限元法计算得到其等效弹性模量。计算结果表明:随机单胞模型能反映细观的非均质性,三维均匀化理论的有限元法计算得到的等效弹性模量变化趋势比较符合Miled的试验结果。     

Advancing “Defence-in-depth”: intelligence and systems dynamics

This article aims to encourage the fostering of more systems thinking, and its greater exploitation, within the domain of contemporary intelligence. With particular focus on “micro systems thinking” and with reference to key intelligence processes, such as intelligence analysis, the utility of many systems dynamics within the intelligence context seeks to be further revealed. Through their greater collective harnessing, including up to “System of Systems” (“SoS”) dynamics, and promoting all that they can offer, more sophisticated overarching operational-to-strategic/policy “ends,” notably that of “defence-in-depth,” can be viably further advanced in a sustainable manner into the future. Arguably, a much-needed transformative impact on contemporary intelligence can also be increasingly realised through comprehensively engaging in and with more systems and SoS thinking. Aiding civil protection tasks, crisis management, emergency planners, and civil contingency practitioners likewise gain.     

助飞鱼雷机动区域射击法攻潜能力研究

以飞航式助飞鱼雷为例,在分析助飞鱼雷攻潜过程的基础上,针对机动目标提出了在无指令修正情况下助飞鱼雷的机动区域射击法,并运用解析法对射击诸元进行解算。在建立助飞鱼雷作战能力仿真模型时,围绕捕获概率、鱼雷仿真和目标仿真等方面进行模型的构建,并采用蒙特卡罗方法进行仿真计算,分析采用机动区域射击方法时影响助飞鱼雷攻潜能力的主要因素及其规律,为更好发挥武器对机动目标的打击能力提供理论参考。     

Single batch machine scheduling with deliveries

We consider the problem of scheduling a set of n jobs on a single batch machine, where several jobs can be processed simultaneously. Each job j has a processing time p_j and a size s_j. All jobs are available for processing at time 0. The batch machine has a capacity D. Several jobs can be batched together and processed simultaneously, provided that the total size of the jobs in the batch does not exceed D. The processing time of a batch is the largest processing time among all jobs in the batch. There is a single vehicle available for delivery of the finished products to the customer, and the vehicle has capacity K. We assume that K = rD, where and r is an integer. The travel time of the vehicle is T; that is, T is the time from the manufacturer to the customer. Our goal is to find a schedule of the jobs and a delivery plan so that the service span is minimized, where the service span is the time that the last job is delivered to the customer. We show that if the jobs have identical sizes, then we can find a schedule and delivery plan in time such that the service span is minimum. If the jobs have identical processing times, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most 11/9 times the optimal service span. When the jobs have arbitrary processing times and arbitrary sizes, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most twice the optimal service span. We also derive upper bounds of the absolute worst‐case ratios in both cases. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 470–482, 2015     

面向任务的有人机/无人机协同对地攻击概率模型

有人机/无人机协同对地攻击是未来空对地打击的主要作战样式,如何评估其协同作战的效能是军地双方共同面对的重要课题。首先根据完成对地攻击任务的4个环节建立了对地攻击的总概率模型;然后基于桥联模型建立了各个环节的概率模型;最后给出了一架有人机协同两架无人机对地攻击的算例,并对模型反算、协同与非协同对比以及多波次攻击等问题进行了讨论和分析,验证了模型良好可用性和广泛适用性。     

机翼不对称损伤飞机在大侧滑角下的操稳特性研究

对某小型电动无人机(以下简称SEPUAV)在其左翼破损40%面积矩下的操稳特性进行详细分析。首先在此损伤下典型大侧滑角定常工作点附近进行特殊的小扰动线性化,然后进行特征根和飞行运动模态的分析;其次对此特殊构型SEPUAV进行操稳特性、时频响应特性进行分析。分析结果表明:左翼破损40%面积矩SEPUAV出现特有运动模态并影响全部纵侧向运动状态的响应;部分传递函数出现较多非最小相位零点从而导致初始响应发生反向;部分通道的Bode图中出现多个波峰波谷并有相角提前等现象。分析结果对后续容损飞行控制器的设计起到铺垫的作用。