低错误平层数列分割移位LDPC码构造算法研究

为降低LDPC码错误平层,提出一种基于环分类搜索的数列分割移位LDPC码构造算法。该算法具有码长、码率和列重的任意可设性,同时该类码的Tanner图围长至少为8。循环移位因子可以通过简单的代数表达式描述,从而降低内存需求。仿真结果表明,当误码率达到10-5时,数列分割移位LDPC(496,248)码相对于PEG-LDPC码获得了约1.9dB的性能提升;且随着信噪比的升高,两条译码性能曲线之间的差距将更为增大。此外,列重为3的数列分割移位LDPC码(6144,5376)在信噪比4.6dB以后并未出现明显的错误平层。该构造算法与PS-LDPC码相比在误码率达到10-8时大约获得0.25dB增益,特别在错误平层区域其译码性能优于围长为4和6的PEG构造算法,其构造复杂度和耗时也相较于PS-LDPC码和PEG-LDPC码构造算法展现出一定优势。通过基于Tanner图的诱捕集分析方法,统计(496,248)APPS-LDPC码中由8环组成的部分小型诱捕集并不存在,从而证明了其错误平层降低的原因。     

星载SAR天线阵面形变分析与补偿方法

研究了星载SAR天线阵面形变对波束输出的影响及形变补偿方法.针对未来星载SAR将采用的柔性阵面,提出了一种用于星载SAR天线的空间形变实时测量与控制的闭环系统,建立了阵面形变下阵列流形误差模型,得出小幅度形变主要影响波束的旁瓣输出,通过求解补偿形变权值的最小二乘解,使阵列形变补偿后波束输出与期望波束输出最佳逼近,并给出用于阵列误差补偿的阵列形变测量精度要求.仿真结果验证了本文方法结论的正确性与有效性.     

基于遗传算法的航向测量误差分析

提出了一种基于遗传算法的高精度航向测量误差分析的方法,测量模型由2台全站仪组成.通过最佳保留策略和带约束条件的遗传算子,保证该算法具有全局搜索能力.分析结果表明,遗传算法的搜索空间仅为整个搜索空间的0.03%,该模型在现有码头条件下航向测量的精度可达到4″,满足对舰船导航设备高精度航向标校的要求.     

信息熵和判断矩阵的专家聚类赋权法

为了降低专家聚类赋权过程中由排序向量引起的不确定性和判断矩阵引起的矛盾性,提高权值分配的精确性,提出了基于信息熵和判断矩阵相结合的专家聚类赋权法。该方法采用聚类分析原理,对排序向量进行分类,根据分类结果、信息熵值和一致性比率确定专家权重系数。实例分析表明:基于信息熵和判断矩阵相结合的专家聚类赋权法在具体应用中得到的结果离期望值更近,说明该算法有效可行。     

SINS/DR组合导航系统可观测性研究

对SINS/DR组合导航系统的误差方程进行了介绍。将陀螺漂移、加速度计零偏和里程仪刻度系数误差扩展为卡尔曼滤波器的状态,建立了19维状态的组合导航滤波模型。采用分段线性定常系统(PWCS)分析了载车在各个不同运动特性下SINS/DR组合导航系统的可观测矩阵;利用奇异值分解(SVD)分析法定量地分析了SINS/DR导航系统的可观测度。通过系统仿真预测了位置误差、姿态误差和速度误差的滤波效果,仿真结果表明,位置误差、姿态误差和速度误差的估计效果较好。     

高灵敏度GPS软件接收机捕获算法

针对传统方法难以实现室内环境下GPS信号的捕获以及传统弱信号捕获算法的一系列弊端,介绍了一种新的捕获算法。由于数据段通过“先累加后相关”的方式进行相干积分可以减少运算量,以此方法改进的半位捕获法进行数据段选择可以避免导航数据位翻转,并且改进后的差分相干积分能够减小非相干积分造成的“平方损失”和改善信噪比,融合上述优点,提出了一种新的算法,为高灵敏度GPS软件接收机的实现提供了保证。仿真结果表明,此算法极大的提高了接收机的捕获性能,并且能够快速捕获到载噪比低至25dB/Hz的微弱信号。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Failure profiles of coherent systems

In this paper we first introduce and study the notion of failure profiles which is based on the concepts of paths and cuts in system reliability. The relationship of failure profiles to two notions of component importance is highlighted, and an expression for the density function of the lifetime of a coherent system, with independent and not necessarily identical component lifetimes, is derived. We then demonstrate the way that failure profiles can be used to establish likelihood ratio orderings of lifetimes of two systems. Finally we use failure profiles to obtain bounds, in the likelihood ratio sense, on the lifetimes of coherent systems with independent and not necessarily identical component lifetimes. The bounds are relatively easy to compute and use. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

二维超声速空气引射器启动特性试验研究

（静）超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据：当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.