炸药冲击波激励工作气体产生可见光的辐射机理研究

研究炸药冲击波激励工作气体的辐射问题。通过理论分析 ,给出气体冲击波波阵面的数学模型。提出了高温环境下工作气体产生可见光的辐射机理 ,最后提出在冲击波作用下提高气体辐射强度的方法。     

辐射叶加载的短波宽带鞭状天线优化设计

提出一款具有多层辐射叶结构的新型鞭状天线,在10 m鞭状天线体上设置不同的辐射叶层数、半径、长度、分支数、仰角及其分布情况,研究其对天线辐射性能的影响,综合考虑选择一套最合适的辐射叶结构,并为天线进行双加载和宽带匹配网络的算法优化。仿真结果表明,与现有的普通宽带鞭状天线相比,增益和效率得到了普遍提高,在低频段增益最高提高了3 dB,效率最高提高了5%;在高频段增益最高提高了5 dB,效率最高提高了35%,方向图上翘也得到了一定的抑制,为改善现有的宽带鞭状天线提供一种新的结构设计方法。     

基于相关算法超声流量计的研究

为解决开采原油的精确在线计量问题,在对超声波相关流量计原理分析的基础上,重点研究了超声波相关流量算法。采用循环相关算法,有效克服了有限长离散数据线性相关算法所出现的计算失效问题,并以DSP芯片为核心,实现了超声波相关流量测量系统的设计,完成了信息不丢失测量以及对困难流体流量的非接触在线计量。实验方案经油田现场测试,计量误差可以控制在2%以内。     

Ka波段VCO控制信号发生器设计及调制域测试方法

采用DSP的SPORT端口控制16位高速串行DAC,设计了任意电压信号发生器,用于控制Ka波段连续波雷达压控振荡器产生频率可任意调制的发射信号。利用该信号发生器与调制域分析仪,测试了压控振荡器的调制特性和阶跃响应。     

3mm波段混凝土屏蔽材料的研究

在混凝土中添加标准砂,钢纤维,铁晶矿砂,炭纤维毡,氧化锌晶须,铁氧体,乙炔碳黑,羰基铁粉等材料,制成了具有微波吸收性能的混凝土屏蔽材料,以期能探索一条大型建筑及军事掩体的电磁防护的新途径。在3mm波段范围内对混凝土屏蔽材料进行了初步的实验研究,研究了不同材料、不同掺量下电磁波的吸收衰减特性,并分析了它们之间的关系,为进一步的研究指明了方向。     

爆电换能的理论分析

考虑了铁电介质的介电松弛和电导率松弛,计及冲击波阵面在样品中传播过程的影响,改进了垂直模式冲击波加载铁电陶瓷电响应的理论,且理论分析与实验结果基本一致。     

Investigation on energy output structure of explosives near-ground explosion

In order to give the energy output structure of typical explosives near-ground explosion in real ground conditions, the free-field shockwave, ground reflection shockwave and Mach wave overpressure time history of composition B explosive, RDX explosive and aluminized explosive were measured by air pressure sensors and ground pressure sensors. The shape of the free-field shock wave, ground reflection shock wave, and Mach wave and explosion flame were captured by high-speed camera. The experimental results show that, at the same horizontal distance from the initiation point, the peak overpressure of explosive shock wave of composition B explosive, both in the air and on the ground, is less than that of RDX and aluminized explosives. At a distance of 3.0 m from the initiation point, the peak overpressure of aluminized explosives is slightly less than that of RDX explosives. Owing to the exothermic effect of aluminum powder, the pressure drop of aluminized explosives is slower than that of RDX explosives. At 5.0 m from the initiation point, the peak overpressure of aluminized explosives is larger than that of RDX explosives. At the same position from the initiation point, among the three kinds of explosives, the impulse of aluminized explosives is the maximum and the impulse of composition B explosives is the minimum. With the increase of the horizontal distance from the initiation point, the height of Mach triple-points (Mach steam) of the three explosives increases gradually. At the same horizontal distance from the initiation point, there is poorly difference in the height of Mach triple-points between aluminized explosive and RDX explosive, and the height of Mach triple-points of composition B explosive is much smaller than that of other two explosives. The maximum diameter and duration of the fireball formed by aluminized explosives are the largest, followed by composition B explosive, and the maximum diameter and duration of the fireball formed by RDX explosive are the smallest.     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

AM波在LC电路中的不失真条件

分析AM波通过LC谐振放大器时的不失真条件,提出解决失真的办法.     

冲击波和高速破片联合作用下固支方板毁伤效应数值模拟

为探讨固支方形钢板结构在空爆冲击波和高速破片联合作用下的动态响应过程及变形破坏模式,利用有限元分析软件ANSYS/LS-DYNA,开展了空爆冲击波和高速破片对固支方板的联合作用数值模拟计算,阐述了固支方板在联合载荷作用下动态响应过程的2个阶段,以及在不同爆距下的变形破坏模式和特点。结果表明,随着爆距增加,在破片密集作用区内,钢板的破坏模式存在从集团冲塞破口到部分穿孔边界撕裂联通,再到无穿孔边界撕裂现象的转换。