飞行控制系统的重构技术研究

飞行控制系统的重构技术可以有效地提高飞行器的生存能力和任务效能,已成为现代飞行器综合设计领域的热门研究专题之一.介绍了飞控系统重构技术的发展历史及现状,对目前几种重要的飞行控制系统重构方法进行了概述和分析,总结了飞控系统重构技术领域里的一些热点问题,最后展望了未来飞控系统重构技术的发展趋势.     

水雷气动不平衡式发射轴向受力优化分析

基于水雷气动不平衡式发射内弹道数学模型,建立了轴向受力和出管速度的泛函表达式,以基本可行解为基准,对可行解区间进行了仿真计算,通过将轴向受力和出管速度函数在基本可行解处一阶泰勒展开,并采用分段函数表示可行解各分量的变化律,从而将非线性问题转化为线性规划问题,运用单纯形法进行优化求解,得到了最优发射条件.     

基于SNF的一种检测和跟踪性能优化方法

对于一个监视系统,跟踪性能的优化要求检测系统和跟踪系统通过引入反馈进行联合设计,针对最大量测幅值邻域滤波器(SNF),提出了先验和后验检测跟踪优化准则,通过分析得出先验优化准则不可行这一结论,而利用后验优化准则同时对检测阈值和门值的联合优化,仿真结果表明,用后验优化准则进行检测和跟踪性能优化,不仅具有比恒虚警率更好的跟踪精度,而且其计算代价也大为降低.     

An efficient SPH methodology for modelling mechanical characteristics of particulate composites

Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical, automobile, aerospace including defence technology. Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites. Due to their favourable properties, particle-based methods provide a convenient platform to model failure or fracture of these composites. Smooth particle hydrodynamics (SPH) is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting. One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions. In this paper, a master-slave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method. The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach. A minimum cut-off value-based error criteria is employed to improve the compu-tational efficiency of the proposed methodology. In addition, the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency. The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.     

Adaptive phasefield modelling of crack propagation in orthotropic functionally graded materials

In this work, we extend the recently proposed adaptive phase field method to model fracture in orthotropic functionally graded materials (FGMs). A recovery type error indicator combined with quadtree decomposition is employed for adaptive mesh refinement. The proposed approach is capable of capturing the fracture process with a localized mesh refinement that provides notable gains in computational efficiency. The implementation is validated against experimental data and other nu-merical experiments on orthotropic materials with different material orientations. The results reveal an increase in the stiffness and the maximum force with increasing material orientation angle. The study is then extended to the analysis of orthotropic FGMs. It is observed that, if the gradation in fracture properties is neglected, the material gradient plays a secondary role, with the fracture behaviour being dominated by the orthotropy of the material. However, when the toughness increases along the crack propagation path, a substantial gain in fracture resistance is observed.     

Survivability assessment of spacecraft impacted by orbit debris

To help optimize the spacecraft design and reduce the risk of spacecraft mission failure, a new approach to assess the survivability of spacecraft in orbit is presented here, including the following three steps:1) Sensitivity Analysis of spacecraft. A new sensitivity analysis method, a ray method based on virtual outer wall, is presented here. Using rays to simulate the debris cloud can effectively address the component shadowing issues. 2) Component Vulnerability analysis of spacecraft. A function"Component functional reduction degree — Component physical damage degree"is provided here to clearly describe the component functional reduction. 3) System-level Survivability Assessment of spacecraft. A new method based on expert knowledge reasoning, instead of traditional artificial failure tree method, is presented here to greatly improve the efficiency and accuracy of calculation.     

确定Kelvin模型粘弹性材料参数的一种实验方法

从Kelvin模型和Euler-bernoulli梁理论出发,利用弹性-粘弹性相应原理和弹性材料动力学理论得出粘弹性梁的动力学方程。利用中心差分法分析了粘弹性材料悬臂梁的动态函数。根据振动特性,将材料参数与梁应变响应周期及振幅衰减相联系;利用这种联系,提出了测定Kelvin模型粘弹性材料参数的一种简单实验方法;分别取不同长度的橡胶悬臂梁进行了相应的实验,测出了材料的剪切模量和粘性系数;分析实验结果,得出一些有益的结论。     

指挥信息系统非线性最优化问题的混沌搜索解法

指挥信息系统进行辅助决策很多情况下是一个求解最优化问题的过程,指挥信息系统遇到的很多问题具有非线性,同时指挥信息系统对算法的适应性和收敛速度要求相当严格。对此,普通的优化技术只能求出局部最优解。基于混沌搜索技术的计算智能具有全局搜索能力强、算法简洁、计算量小、收敛速度快的特点,成为一种求解非线性最优化问题全局最优的有效方法。算例表明,当搜索次数达到一定数量时,混沌搜索方法可以保证算法收敛到全局最优解,且计算效率很高。     

改进型部队综合战斗力指数评估方法与模型

针对传统的部队综合战斗力指数评估方法中出现的计算结果与实际结果有较大偏差的问题,分析了其产生的原因,然后根据“综合战斗力指数”及其相关概念的定义,对“火力指数”、“生存力指数”及“机动力指数”等概念的内涵和外延进行了新的界定,并进一步通过对部队作战能力的构成及因素分析,提出了部队综合战斗力指数评估方法,建立了相应的模型。     

Sojourn time analysis of a queueing system with two‐phase service and server vacations

We consider a two‐phase service queueing system with batch Poisson arrivals and server vacations denoted by M^X/G₁‐G₂/1. The first phase service is an exhaustive or a gated bulk service, and the second phase is given individually to the members of a batch. By a reduction to an M^X/G/1 vacation system and applying the level‐crossing method to a workload process with two types of vacations, we obtain the Laplace–Stieltjes transform of the sojourn time distribution in the M^X/G₁‐G₂/1 with single or multiple vacations. The decomposition expression is derived for the Laplace–Stieltjes transform of the sojourn time distribution, and the first two moments of the sojourn time are provided. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007