舰船水下静态电场深度换算的格林函数法

为从有限深度、有限范围内的舰船水下静态电场数据获知实际舰船更大深度上的场分布特征,在对深海环境中舰船静态电场满足的拉普拉斯方程进行求解的基础上,提出静态电场深度换算的格林函数法,推导出了换算公式的边界积分表达式,给出了实际应用中换算公式的近似计算方法。以舰船静态电场的基本模拟体——单个水平电偶极子的场为例,采用数值仿真的方法对换算公式进行了验证,并对近似计算方法进行了讨论。研究结果表明:该方法可直接通过对测量平面上离散场量进行二重求和来实现静态电场的各类深度换算;与文献中已有的换算方法相比,其换算过程更为快捷。     

基于整数小波变换的多光谱遥感图像压缩技术

在分析多光谱图像小波变换后系数特点的基础上,提出了一种基于整数小波变换的3维集合分裂嵌入块编码(3D SPECK)压缩方法。该方法将小波变换压缩技术中的零树编码推广到多光谱图像压缩中,采用整数小波变换去除空间冗余,对单波段图像,采用2D SPECK编码,对多波段图像,谱域上构成的小波矢量采用离散余弦变换(DCT)进行变换,对变换后的系数进行3D SPECK编码。实验结果表明,该方法硬件实现简单,编码解码时间快,对内存要求低。     

An efficient SPH methodology for modelling mechanical characteristics of particulate composites

Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical, automobile, aerospace including defence technology. Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites. Due to their favourable properties, particle-based methods provide a convenient platform to model failure or fracture of these composites. Smooth particle hydrodynamics (SPH) is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting. One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions. In this paper, a master-slave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method. The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach. A minimum cut-off value-based error criteria is employed to improve the compu-tational efficiency of the proposed methodology. In addition, the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency. The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.     

基于神经网络的广义两点边值问题

在航天领域中 ,多数制导问题均可以抽象为广义两点边值问题。本文探讨了神经网络在广义两点边值问题求解中的应用。首先讨论了离线制导这一类静态两点边值问题的求解 ,在此基础上 ,对在线制导这一类动态两点边值问题进行了分析 ,并给出了有效的解决方法     

平板湍流边界层内气泡流流动实验研究

在低湍流度水槽里 ,利用片光源显示了平板气液两相湍流边界层内气泡流的流场结构 ,研究了平板安装位置、来流速度、喷气方式等参数对湍流边界层内气泡流的影响 .利用激光测速技术测量了平板水平放置时气泡流最外缘处的水平速度及厚度 .结果表明 :平板喷气减阻的原因在于喷气改变了平板湍流边界层的流动结构 ,抑制了湍流     

热边界层流动中管道的热损失

在高粘液体管道输送中,利用热边界层减阻需确定热流量的计算。热边界层流动中管道的各种热损失是总热流量的一部分。热损失有管内、管外及保温层三种形式。管外热损失是向周围的空气散发的,通过对流的形式发生。管内的热损失是导热或对流。保温层的热损失主要是导热。利用热边界层理论的成果,给出了各种传热系数和管道热损失的计算公式,并给出了多个计算实例。     

A novel non-separation opening scheme of front cover for rocket launch canister

In view of that existing opening technologies of front cover for rocket launch canister have disadvantages such as causing damage on the ground equipment, not being reused and easily broken. A novel reusable non-separation spring-driven opening scheme is proposed to achieve rapid and reliable opening of the front cover. The mathematical model of the opening process of the front cover is established by the rigid body dynamics theory. To establish a response surface model to optimize the opening scheme, three main influencing factors of the opening process are obtained through the designed experiments, including the pre-compression, the stiffness of the thrust spring, and the thrust spring force arm length. In addition, the prescribed kinematic law was taken as constraint, and the smaller thrust spring preliminary pressure and angular velocity was taken as optimization expectations. The results show that the opening scheme meets the design requirements on opening process well. It also shows that the optimized scheme can reduce the kinetic energy of the front cover, and the impact on the canister effectively, achieving a reliable and rapid opening of the front cover.     

应用边界交叉法的高超声速滑翔飞行器多目标轨迹优化

针对高超声速滑翔飞行器复杂约束条件下多目标轨迹设计问题,基于边界交叉法和伪谱法提出多目标轨迹优化方法。分析高超声速滑翔飞行器复杂约束轨迹优化问题的特点,提出多目标轨迹优化问题。采用边界交叉法和伪谱法将多目标轨迹优化问题转化为一组单目标优化子问题,利用非线性规划算法分别求解。在优化过程中,将已求解子问题的解作为下一个子问题的初始值,求解最大横程和最小峰值热流轨迹优化问题。仿真结果表明:所提方法能够有效搜索到优化轨迹的Pareto前沿,可以为高超声速滑翔飞行器轨迹设计提供参考。     

两道同侧扫掠激波作用下形成的三维平板边界层

为探索一种减弱扫掠激波/边界层干扰强度的侧压方式,采用数值计算方法研究两道同侧扫掠激波作用下形成的三维平板边界层。对三维边界层的流动机理进行研究,并与相同气流偏转角的一道扫掠激波作用下形成的三维边界层进行定量比较。研究表明,存在两道同侧扫掠激波时,第一道扫掠激波使侧壁附近边界层变薄,进而使第二道扫掠激波与再附形成的边界层的相互作用减弱,从而总的效果是两道扫掠激波与边界层的相互作用强度比一道扫掠激波的弱;两道扫掠激波的气流总偏转角与一道扫掠激波的相同,相交后汇聚成的激波强度与一道扫掠激波的基本相同,之前被两道扫掠激波"扫"起来的边界层在汇聚激波作用下还呈现锥形流动,分离线和来流的夹角也与一道扫掠激波的基本相同。     

五阶HWCNS在低速复杂流场中的应用

采用五阶精度显式混合加权紧致非线性格式求解雷诺平均NS方程;利用多块对接结构网格技术,对30P-30N多段翼型进行网格收敛性研究。在不考虑转捩的情况下,采用SA一方程湍流模型研究混合加权紧致非线性格式与二阶精度MUSCL格式对该翼型压力分布和典型站位速度型的影响,并与实验结果进行对比分析。采用混合加权紧致非线性格式和SA一方程湍流模型模拟梯形翼高升力构型低速复杂流场,通过对总体气动特性和压力分布的分析,探讨五阶精度显式混合加权紧致非线性格式在低速复杂外形流动中的应用能力。结果表明,对30P-30N三段翼型,采用全湍流模拟方法可以得到较好的压力分布;对梯形翼高升力构型,在附着流和边界层小分离情况下混合加权紧致非线性格式有较好的模拟能力。