Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

某自行高炮虚拟训练系统设计及关键技术

结合自行式高炮装备的结构特点和训练需求,采用机理与外观相分离的设计思想,建立一种多节点、多任务的分布式仿真训练系统。以机理模型为设计核心,采用了客户/服务器模式的系统拓扑结构。介绍了复杂装备外观建模方法和交互技术以及基于MATLAB的机理模型构建和系统集成方法。     

分布式标图系统关键技术研究

针对分布式标图系统的面临的主要问题,提出运用发布/订阅和消息中间件的技术,实现分布式标图系统的松散耦合,有效地降低了系统中的数据流量.介绍了基于消息中间件和发布/订阅机制实现的分布式标图系统的主要数据结构和功能模块的实现方法,指出这些技术对通用综合态势图的生成也具有重要意义.     

一种嵌入式系统中软硬件故障的划分方法

软硬件故障是嵌入式系统可靠性的关键问题之一,如何划分软硬件故障对于整个系统的可靠性研究来说是至关重要的,也是最基本的一步.给出了软硬件故障的基本定义,并与单纯的软件故障和单纯的硬件故障进行了对比,总结了软硬件故障的基本特点.在此基础上,归纳了几条软硬件故障的划分原则,提出了一种软硬件故障的划分流程,并通过形式化方法对某装备的具体软硬件故障进行了划分,为进一步的研究提供了有力的依据.     

质谱技术在火灾物证鉴定中的应用

随着火灾原因的多样化、复杂化,应用准确、高效的现代化仪器分析的方法鉴定火灾原因日益重要。简述了质谱相关技术,如气相色谱／质谱技术（GC／MS）,串联质谱技术（MS／MS）等在火灾物证鉴定中的应用。     

A partial characterization of the optimal ordering/rationing policy for a periodic review system with two demand classes and backordering

We consider a finite horizon periodic review, single product inventory system with a fixed setup cost and two stochastic demand classes that differ in their backordering costs. In each period, one must decide whether and how much to order, and how much demand of the lower class should be satisfied. We show that the optimal ordering policy can be characterized as a state dependent (s,S) policy, and the rationing structure is partially obtained based on the subconvexity of the cost function. We then propose a simple heuristic rationing policy, which is easy to implement and close to optimal for intensive numerical examples. We further study the case when the first demand class is deterministic and must be satisfied immediately. We show the optimality of the state dependent (s,S) ordering policy, and obtain additional rationing structural properties. Based on these properties, the optimal ordering and rationing policy for any state can be generated by finding the optimal policy of only a finite set of states, and for each state in this set, the optimal policy is obtained simply by choosing a policy from at most two alternatives. An efficient algorithm is then proposed. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

基于多线程的CABAC并行编码方法

CABAC(Context based Adaptive Binary Arithmetic Coding)是H.264/AVC主要档次以上配置中推荐采用的熵编码方法.相比其他的熵编码方法,CABAC能够节省编码码率,但其计算串行性强,不能较好适应片上多核环境.针对这一问题提出了基于多线程的CABAC并行编码方法.大量实验统计表明,该方法负载划分较为均衡,对序列熵编码的单独加速比最高可达1.78.     

一种面向应用的NOC缓冲区分配算法

片上互连网络是片上通信问题的有效解决方案,但其存在严重的资源限制.输入缓冲区占据片上网络总面积的显著部分,同时其容量大小对不同应用映射后获得的性能有重要影响.给出一种面向应用数据负载的NOC缓冲区分配算法,针对不同的应用映射,该算法可以根据数据流量分布特征实现各个路由器输入通道上缓冲区资源的定制分配.实验结果表明,使用该算法后,系统缓冲区资源得到了更有效的利用.与均匀分配缓冲区的NOC系统相比,采用该算法实现的缓冲区分配方案使系统在保持性能变化不大的情况下,能够节省约50%的缓冲区总容量.     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.