界面改性对SiCp/Cu复合材料导热性能的影响

采用磁控溅射法结合结晶化热处理工艺在SiC颗粒表面成功制备了金属Mo涂层,分析Mo涂层的成分和形貌;采用热压烧结工艺制备SiCp/Cu复合材料,重点对比分析Mo界面阻挡层厚度对复合材料导热性能的影响。结果表明:磁控溅射法能够在SiC颗粒表面沉积得到Mo涂层,随溅射时间的延长,Mo涂层的厚度增加、粗糙度增大,且磁控溅射后SiC颗粒表面直接得到的Mo涂层为非晶态,结晶化热处理后,变为致密平整的晶态Mo涂层。磁控溅射时间对Mo涂层厚度和复合材料导热性能影响明显。随磁控溅射时间的增加,复合材料的热导率呈先增后减趋势。采用磁控溅射9h镀Mo改性并经过800℃结晶化热处理的SiC复合粉体在850℃下热压烧结制备的SiCp/Cu复合材料(VSiC=50%),其热导率达到了最高值274.056W/(m·K)。     

船海复合场景面元化快速电磁建模方法及SAR成像仿真

在微波高频段,海面背景或海上船类目标往往具有电大尺寸和复杂精细的结构,这给船海复合场景的电磁建模带来巨大的计算负担。为简化计算,基于海面电磁散射模型面元化思想和图形电磁学,结合计算耦合场的四路径模型,提出一种电大尺寸船海复合场景电磁散射的快速计算方法。在保证海面与目标复合散射场的计算准确性前提下,提高计算效率。仿真并分析不同雷达参数下动态海面与目标的雷达散射截面,计算结果与实测数据以及精确数值方法结果的良好一致性验证了方法的准确性。将复合散射快速计算方法应用于合成孔径雷达成像仿真,仿真结果验证了方法的有效性。     

光纤陀螺仪(FOG)技术及发展应用

介绍了当前惯性导航领域一门新型技术光纤陀螺仪(FOG)的基本原理、类型及两种典型光纤陀螺仪的结构,分析了光纤陀螺仪的误差及消除误差的方法,通过介绍光纤陀螺技术发展的过程及世界各主要国家在光纤陀螺实用化方面取得的进展,指出了光纤陀螺仪与其它光学陀螺相比具有的优点及良好的发展前景。     

不同截面形状复合长杆弹对陶瓷复合靶板侵彻研究

采用数值模拟技术研究了由3种不同截面形状的钨芯外包覆一层钢,形成的钢包覆层复合长杆弹在入射速度为1200m/s～1700m/s时对陶瓷/金属复合靶板的侵彻过程。结果表明:对于同一入射速度、相同弹体长度、同种材料的弹芯和包覆层以及靶板材料而言,等面积的六边形截面钨芯复合长杆弹的侵彻深度明显大于圆形及方形截面,方形及六边形截面与和它们等外接圆形成的圆形截面复合长杆弹侵彻深度没有明显差别,本研究认为这是与不同截面钨芯的外接圆直径直接相关。六边形截面长杆弹侵彻过程中的自锐化现象是其侵彻深度明显大于其它两种弹体的主要原因。     

无线电引信多普勒信号光纤传输系统设计

论述一种光纤传输装置 ,适用于各型无线电引信杆试验多普勒信号传输。该系统采用光介质从电磁场中传递信号 ,克服了电缆传输对电磁场分布的影响 ,大大提高了无线电引信杆试验的精度。     

中小型舰艇设置轻型复合装甲的作用及爆炸破片的杀伤威力计算

简要论述了先进防弹复合材料在舰艇装甲防护中的应用 ,针对中小型舰艇设置轻型复合装甲的目的 ,进一步论证分析了舰艇轻型复合装甲的防御目标和防护部位 ,并结合典型防御目标———导弹爆炸破片的杀伤威力进行了计算分析     

熔锥型保偏光纤耦合器耦合系数分析

耦合系数会直接影响到偏振光经过耦合器熔锥区后的光能量分布,从而影响保偏光纤耦合器的耦合性能。基于光波导模式耦合理论,建立了熔锥型保偏光纤耦合器的耦合模型,推导出了适应于纤芯为圆型、偏振主轴非平行时保偏光纤耦合器的耦合系数计算公式,形式简单、应用方便。为耦合模方程的求解以及耦合器的性能分析提供了前提条件,从而为熔锥型保偏光纤耦合器的高性能制造提供了理论指导。     

Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics, sustainability concept and environmental issues, hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications (structural, military, aerospace and automotive vehicles). Compression, tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced (PVB) polyvinyl butyral by hot hydraulic press technique were experimentally conducted. Six types of fabricated composites with various constituents (jute, carbon and their hybrids) were fabricated and tested. Notably, fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content. On the other hand, Jute composites possess high strain compared to pure carbon composite, which gives an overall improvement in mechanical behaviours. Interestingly, H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading. Carbon composite (C) exhibited the highest fatigue resistance, whiles jute composite (J) possessed the highest strain and semi brittle trends in both mechanical and fatigue performance. Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

激光制备高附着性能的铜基类金刚石膜

提升类金刚石(Diamond-Like Carbon, DLC)膜在被保护基底上的附着能力具有明显的实际应用价值。从微观机理上分析了前期设计的Cu基多层DLC膜有效性的原因。在此基础上,研究了DLC/SiC循环层中两者厚度比例对膜层的附着性能、纳米硬度和耐磨性的影响,以优化结构、进一步提升实际应用所需的膜层性能。纳米划痕和压痕测试结果表明:随着DLC层与SiC层厚度比例的增大,多层DLC膜在Cu基上附着性能逐渐降低,但当厚度比小于2.3时,仍接近厚度400 nm的单层DLC膜在Si基上的附着性能;Cu基多层DLC膜的纳米硬度逐渐提高,同时,耐磨性接近纯DLC膜。