聚碳硅烷先驱体交联后热处理对陶瓷转化的影响

将聚碳硅烷交联产物在裂解前,先在200～400℃进行不同温度下的热处理,研究其对陶瓷转化过程的影响。结果表明,经400℃/2h热处理后,其裂解产物的陶瓷产率达到73 9%;裂解产物结构的主要缺陷为气孔,而未经热处理样品裂解产物结构的主要缺陷为裂纹。如果用该结构的陶瓷为基体,可以减少纤维损伤。     

不同裂解温度对制备SiCf/Si-O-C复合材料性能研究

以聚硅氧烷为先驱体,研究先驱体转化过程中在不同的裂解温度下对制备SiCf/Si-O-C复合材料性能影响.结果表明,当裂解温度在700℃、800℃时,陶瓷基复合材料的弯曲强度分别为255.2 MPa、309.0 MPa;当裂解温度在1000℃时,陶瓷基复合材料的弯曲强度为45.3 MPa.对SiCf/Si-O-C复合材料的微观结构及载荷-位移曲线进行分析,发现界面结构是影响SiCf/Si-O-C复合材料性能的主要因素.     

SiCw/Al复合材料的强度分析

用简化应力的分析方法推导了SiCw Al复合材料的强度与SiC晶须偏轴角α的关系,并通过试验进行验证.结果表明,计算的SiCw Al复合材料强度与实测值比较接近,其误差归因于压缩变形过程中SiC晶须发生了转动和折断,改变了SiC晶须的偏轴角和平均长径比.     

模糊合成算子在作战方案综合评估的应用研究

在分布式交互仿真中,根据仿真结果对作战方案进行综合评估,运用模糊综合评判的方法进行评判,并着重对合成算子的选择进行分析,确定乘与有界算子M(·, )为比较适合对作战方案评估的算子.     

Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method

An effective hybrid optimization method is proposed by integrating an adaptive Kriging (A-Kriging) into an improved partial swarm optimization algorithm (IPSO) to give a so-called A-Kriging-IPSO for maxi-mizing the buckling load of laminated composite plates (LCPs) under uniaxial and biaxial compressions. In this method, a novel iterative adaptive Kriging model, which is structured using two training sample sets as active and adaptive points, is utilized to directly predict the buckling load of the LCPs and to improve the efficiency of the optimization process. The active points are selected from the initial data set while the adaptive points are generated using the radial random-based convex samples. The cell-based smoothed discrete shear gap method (CS-DSG3) is employed to analyze the buckling behavior of the LCPs to provide the response of adaptive and input data sets. The buckling load of the LCPs is maximized by utilizing the IPSO algorithm. To demonstrate the efficiency and accuracy of the proposed methodology, the LCPs with different layers (2, 3, 4, and 10 layers), boundary conditions, aspect ratios and load patterns (biaxial and uniaxial loads) are investigated. The results obtained by proposed method are in good agreement with the literature results, but with less computational burden. By applying adaptive radial Kriging model, the accurate optimal results-based predictions of the buckling load are obtained for the studied LCPs.     

Bionic stab-resistant body armor based on triangular pyramid structure

A stab-resistant substrate was designed and realized with a triangular pyramidal structure, inspired by the biological armor model in nature. The stab-resistance behavior and dynamic response mechanisms were studied through numerical simulation and experimental testing of a knife impacting a substrate, and an optimal structural design was obtained accordingly, with a tilted angle of 22.5° and optimal thickness of 1.2 mm. It was shown that the triangular pyramidal structure generated twice the internal energy of the knife than the flat substrate due to the dispersing effect of the structure. The force parallel to the inclination caused a significant scratch on the substrate surface, while the force perpendicular caused obvious substrate deformation. A new riveting method was used to form the total layer, which passed the GA 68—2008 standard. The stab-resistant clothing coupled with the reduced wearing burden could provide effective protection and avoid fatal injuries on security personnel working in dangerous environments. The method provided may enlighten the future design and manufacturing of stab-resistant clothing.     

复合材料偏心加筋壳特性分析

用任意加筋壳单元研究了复合材料偏心加筋壳结构的特性.研究表明,在结构几何尺寸已经确定的情况下,可以调整加强肋骨的偏心量,以改变加筋壳结构内部的受力和变形;调整加强肋骨的布置方式也是改变加筋壳结构强度和刚度的有效方法.     

碳化硼表面金属化初步研究

为了降低碳化硼(B,C)与金属钎焊连接的温度,采用真空熔结Al基钎料的方法,在1000℃时对其进行了表面金属化处理,SEM和EDAX观察分析B4C与钎料结合断面的形貌和元素面分布,发现B4C与钎料界面发生了互扩散,界面结合致密,形成冶金结合.     

激光成像雷达空间目标探测与识别技术

研究了激光三维成像雷达在动能拦截器空间目标探测与识别方面的应用。首先介绍了激光3D成像雷达系统基本原理,然后设计了激光3D成像雷达目标识别的工作流程,最后提出了基于旋转图像转换的3D目标识别算法。进一步探索了红外+LADAR主被动复合光学成像导引头在空天防御拦截武器目标探测与识别的应用,分析了复合光学导引头的关键技术,给出了相应的成像结果。     

列车用复合材料阻燃性能研究

不同类别的阻燃剂配合使用能产生协效作用,大大提高阻燃效果。在甲基丙烯酸类不饱和聚酯树脂9001基体中,添加微囊化红磷/氢氧化铝/三氧化二锑/甲基膦酸二甲酯(MRP/Al(OH)3/Sb2O3/DMMP)阻燃剂体系,对其树脂体系固化物及玻璃纤维织物复合材料的力学性能和阻燃性能进行了实验研究,提出了一种有望用于列车复合材料大尺寸构件制造的性能优异、价格低廉的新体系。结果表明,当质量添加比例分别为12%MRP、50%Al(OH)3、2%Sb2O3时,树脂体系室温粘度100mPa.s左右,凝胶时间超过80min,适用于RTM和VIMP等大尺寸构件成型工艺;复合材料拉伸强度215.4MPa,弯曲强度177.15MPa,拉伸模量13.85GPa,弯曲模量13.36GPa,氧指数39.7。