On the hierarchy of γ‐valid cuts in global optimization

Concavity Cuts play an important role in concave minimization. In Porembski, J Global Optim 15 ( 17 ), 371–404 we extended the concept underlying concavity cuts which led to the development of decomposition cuts. In numerical experiments with pure cutting plane algorithms for concave minimization, decomposition cuts have been shown to be superior to concavity cuts. However, three points remained open. First, how to derive decomposition cuts in the degenerate case. Second, how to ensure dominance of decomposition cuts over concavity cuts. Third, how to ensure the finite convergence of a pure cutting plane algorithm solely by decomposition cuts. These points will be addressed in this paper. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

锥形液膜的Kelvin-Helmholtz扰动波

为进行锥形液膜雾化过程分析,研究锥形液膜的Kelvin-Helmholtz稳定性问题,应用小扰动假设,建立了锥形液膜数学模型、轴对称扰动运动的控制方程和边界条件,采用分离变量法求解线性偏微分扰动方程组,经过严格的数学推导,得到了锥形液膜内外表面扰动波增长速率特征方程.当液膜锥角为零时,与环形液膜扰动波特征方程一致;当液膜锥角和液膜内径为零时,与圆射流扰动波特征方程一致,表明导出的锥形液膜扰波动方程是合理的.     

基于VFGPIR联合特征的决策级加权融合检测方法

车载前视地表成像雷达(VFGPIR)探测浅埋目标时面临虚警率过高问题,可利用序列图像特征的联合检测解决这一问题.首先利用Fisher鉴别比(FDR)定量评估从单帧和序列图像中提取的单个特征的鉴别能力;然后针对单个最优序列特征无法满足探测指标要求提出一种基于决策级加权融合的多特征联合检测方法;最后利用接收机工作特性(ROC)曲线来验证所提方法的有效性.试验结果表明:序列特征比单帧图像特征具有更好的鉴别能力;所提方法性能优于单个最优序列特征、特征向量和多数票融合准则对应的检测结果,有望满足实际探雷应用需求.     

基于遗传算法的大型降落伞气动力参数辨识

建立了降落伞回收系统的六自由度动力学及运动模型,针对大型降落伞可观测数据少的特点,设计遗传算法辨识其气动力参数,利用仿真验证了辨识方法的可行性和辨识模型的正确性。结合空投试验录像分析数据,辨识了某型号飞船所采用大型环帆伞的气动力参数,并利用辨识结果对其稳定性进行分析,其结论可作为回收系统设计的理论参考依据。     

Modeling and analysis of multiobjective lot splitting for N‐product M‐machine flowshop lines

Lot splitting is a new approach for improving productivity by dividing production lots into sublots. This approach enables accelerating production flow, reducing lead‐time and increasing the utilization of organization resources. Most of the lot splitting models in the literature have addressed a single objective problem, usually the makespan or flowtime objectives. Simultaneous minimization of these two objectives has rarely been addressed in the literature despite of its high relevancy to most industrial environments. This work aims at solving a multiobjective lot splitting problem for multiple products in a flowshop environment. Tight mixed‐integer linear programming (MILP) formulations for minimizing the makespan and flowtime are presented. Then, the MinMax solution, which takes both objectives into consideration, is defined and suggested as an alternative objective. By solving the MILP model, it was found that minimizing one objective results in an average loss of about 15% in the other objective. The MinMax solution, on the other hand, results in an average loss of 4.6% from the furthest objective and 2.5% from the closest objective. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

射频发射模块非线性效应的消除方法

射频模块存在相位特性的非线性效应,群延迟随频率的变化不再是一个常数,并可能造成输出射频信号的波形失真,而影响精密射频信号源的输出精度。基于递归最小二乘算法的自适应滤波器,提出了消除其非线性效应的新方法。并以GPS模拟源为例,利用其自校模块,采用软件无线电和数字信号处理技术,精确估计出射频模块的模型参数。将基带合成信号通过一个数字逆滤波器,以消除相位的非线性和群延迟随频率的变化。利用自编的仿真程序包,在Matlab中进行了相应的模拟计算。仿真结果表明,该方法可有效地消除相位非线性效应对射频信号的影响,输出信号的波形失真在理论上可控制在0.01%以内。     

巡航导弹航迹规划中雷达探测盲区的快速构造算法

现代防空系统对巡航导弹的低空飞行和突防造成极大的威胁,利用防空系统中预警雷达的探测盲区进行隐蔽飞行是提高巡航导弹生存能力的重要手段,在此雷达探测盲区的快速构造算法是关键。说明了什么是雷达探测盲区,分析了影响雷达探测盲区的三个主要因素,并就对巡航导弹影响最大的雷达地形遮蔽盲区构造了基于极坐标的快速算法,并用一个地形实例验证了该方法的有效性。     

基于蚁群算法的图像边缘检测研究

将蚁群算法应用于图像分割领域,提出了一种新的基于蚁群算法的图像边缘检测方法。详细阐述了蚁群算法与该方法的基本原理和具体实现过程。为了提高算法效率,进行两处改进,第一将蚂蚁初始位置由随机放置修改为放置在图像边缘附近,可取一图像灰度梯度阈值来实现,第二将信息激素强度和启发式引导函数值均定义为像素点灰度梯度值的函数。大量实验结果证明了该算法能有效地检测出图像边缘,而且具有适应性强、效率高等特点。     

二维弹道修正弹及其制导控制技术综述

针对二维弹道修正弹这类具有广泛应用前景的智能弹药,综述了二维弹道修正弹的发展、主要修正机构方案及其制导控制技术.对二维弹道修正弹的研制历程进行总结,梳理发展脉络揭示其发展规律,分析二维修正弹的打击任务.对几种主流修正方案进行讨论,分析各机构的作用特点及研究难点.基于二维弹道修正弹打击任务需求,从气动辨识及状态估计算法、...     

随机频率步进雷达成像分析

随机频率步进信号兼具步进频率雷达和宽带噪声雷达的特点,不仅可以降低系统瞬时带宽和数据采样率,还具有优良的低截获概率(LPI)、电磁兼容性(EMC)和抗射频干扰(ARFI)特性.分析了随机频率步进信号的相关输出及模糊函数的统计特性,如一阶矩、二阶矩和方差等,并与均匀频率步进信号做了抗干扰性能的比较.提出并分析了相关输出结...