信号自屏蔽电荷耦合原理及应用

本文利用静电信号高压电极自身作为传感器的屏蔽电极,使屏蔽深度与仪器灵敏度要求相一致,并使输入端接收的电荷量与被测电位成正比关系,而获得被测电位数值,提出“信号自屏蔽电荷耦合”原理,并从理论上和实验上论述了原理的正确性和先进性。利用此原理研制成ZPD-l型静电电位动态测试仪,该仪器与美制263型高速静电表、日本MH型人体静电电位仪等先进仪器相比,具有输入电阻高(>10~(14)Ω)、动态特性好,抗干扰能力强、高电压非线性失真小等特点。     

紊流时输油管道油流静电带电计算研究

对紊流条件下输油管道内油流静电带电的计算进行了研究。在合理简化紊流扩散系数和油流速度的基础上,推导出油内有关油流带电的电荷输运方程的解析解,并且根据该解析解导出了冲流电流计算公式。该计算公式同时适用于所有电导率范围内液体介质冲流电流的计算。最后利用文中推出的计算公式对一实验油道的油流带电进行了计算,结果显示公式得到的值和实验值非常吻合。     

The incentive effect of acceptance sampling plans in a supply chain with endogenous product quality

This article studies a firm that procures a product from a supplier. The quality of each product unit is measured by a continuous variable that follows a normal distribution and is correlated within a batch. The firm conducts an inspection and pays the supplier only if the product batch passes the inspection. The inspection not only serves the purpose of preventing a bad batch from reaching customers but also offers the supplier an incentive to improve product quality. The firm determines the acceptance sampling plan, and the supplier determines the quality effort level in either a simultaneous game or a Stackelberg leadership game, in which both parties share inspection cost and recall loss caused by low product quality. In the simultaneous game, we identify the Nash equilibrium form, provide sufficient conditions that guarantee the existence of a pure strategy Nash equilibrium, and find parameter settings under which the decentralized and centralized supply chains achieve the same outcome. By numerical experiments, we show that the firm's acceptance sampling plan and the supplier's quality effort level are sensitive to both the recall loss sharing ratio and the game format (i.e., the precommitment assumption of the inspection policy). © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Pool it,share it,or lose it: an economical view on pooling and sharing of European military capabilities

In a general and economical view, this article analyzes methods and mechanisms for the pooling and sharing of military forces and weapons inside the European Union (EU) in times of scarcity. Pooling and sharing could improve the EU military capabilities significantly if differences in location factors were taken into account and all states would focus on their respective strengths. More competition and less concentration are the keys to ensuring guaranteed access to military assets. Pooling and sharing are likely to be successful only if large states enhance their emphasis on collective defense by mutual aid and self-help, and reduce particularistic and parochial interests of local gain. The realm of personnel has the most potential for improvement but any change is likely to generate policy implications.     

UK firms’ experience and perceptions of defence offsets: Survey results 1

Offsets are a growing feature of international trade in defence equipment. This article assesses the economics of offsets and outlines UK offsets policy. There is a lack of empirical work in the field and the article presents the results of a survey of UK firms’ experience of their involvement in offsets against UK imports of defence equipment. There is also a case study of the AWACS offset programme and an evaluation of policy implications.     

基于秘密共享的卫星网络组密钥管理方案

针对卫星网络组密钥管理的重要性,提出了一个可认证的基于门限秘密共享的组密钥管理方案．结合卫星网络的动态拓扑结构特点,将地面站作为组成员的身份注册中心,以实现对组成员的身份认证,确保节点的合法性．为了提高组密钥的生成效率,选取≠一1颗可见时间长的卫星构建组密钥份额分发中心,降低了组密钥联合生成过程中的通信量．组密钥协商无需安全信道,节省了系统资源．安全性及性能分析表明,该方案不仅具有较强的安全性,而且还具有计算和通信量小的优点．参数分析表明,门限值k与组密钥更新周期T是影响方案安全性的2个重要因子．     

Influence of shaped charge structure parameters on the formation of linear explosively formed projectiles

The research of LEFP (linear explosive forming projectile) is of great value to the development of new warhead due to its excellent performance. To further improve the damage ability of the shaped charge warhead, a special shell overhanging structure was designed to increase the charge based on the traditional spherical charge, in which case the crushing energy of LEFP could be guaranteed. LS-DYNA was used to simulate different charge structures obtained by changing the number of detonation points, the length of shell platform, the radius of curvature and the thickness of liner. The RSM (response surface model) between the molding parameters of LEFP and the structural parameters of charge was established. Based on RSM model, the structure of shaped charge was optimized by using multi-objective genetic algorithm. Meanwhile, the formation process of jet was analyzed by pulsed X-ray photography. The results show that the velocity, length-diameter ratio and specific kinetic energy of the LEFP were closely related to the structural parameters of the shaped charge. After the optimization of charge structure, the forming effect and penetration ability of LEPP had been significantly improved. The experimental data of jet velocity and length were consistent with the numerical results, which verifies the reliability of the numerical results.     

Effects of module number and firing condition on charge thermal safety in gun chamber

Thermal safety of modular charge which is fed into and retained in the chamber after gun fires consecutively is first investigated with cook-off method.A two-dimensional cook-off model of modular charge in gun chamber is established and the cook-off process of modular charge in gun chamber is numerically simulated.Then the effects of module number and firing condition on charge thermal safety are evaluated by researching the cook-off response characteristics of modules.The results show that,under conditions of different module numbers the cook-off responses all occur on the module closest to the boundary of missile,and the single-base propellants located at the inner surface of cartridge ignite first.When the number of loaded module changes from 1 to 6,the cook-off response temperatures vary little,only in a small range of 478.1 K-482.4 K.The cook-off response times decrease logarithmically in the range of 211.2 s-166.7 s with the increasing length of residual air gap in gun chamber.The simulation results are well matched with the experimental data.Furthermore,different firing conditions have great influence on the cook-off response time,minor influence on the initial response position and little in-fluence on the response temperature.Under the three conditions of consecutive 32 launches with 5 rounds/min,43 launches with 1 round/min,and 41 launches with different firing frequencies,the cook-off response temperatures are 479.2 K,481.1 K and 479.9 K respectively and the response times are 709.2 s,211.2 s and 214.4 s respectively.The response position is near the middle area of the inner cartridge surface in the former condition and near the right area in the latter two conditions.     

Should firms conceal information when dealing with common suppliers?

A firm making quantity decision under uncertainty loses profit if its private information is leaked to competitors. Outsourcing increases this risk as a third party supplier may leak information for its own benefit. The firm may choose to conceal information from the competitors by entering in a confidentiality agreement with the supplier. This, however, diminishes the firm's ability to dampen competition by signaling a higher quantity commitment. We examine this trade‐off in a stylized supply chain in which two firms, endowed with private demand information, order sequentially from a common supplier, and engage in differentiated quantity competition. In our model, the supplier can set different wholesale prices for firms, and the second‐mover firm could be better informed. Contrary to what is expected, information concealment is not always beneficial to the first mover. We characterize conditions under which the first mover firm will not prefer concealing information. We show that this depends on the relative informativeness of the second mover and is moderated by competition intensity. We examine the supplier's incentive in participating in information concealment, and develop a contract that enables it for wider set of parameter values. We extend our analysis to examine firms' incentive to improve information. © 2014 Wiley Periodicals, Inc. 62:1–15, 2015     

应急器材柔性采购定价建模与求解

由于当前应急器材储备依然存在“多储”或“少储”风险,为提高储备效益,以企业经济效益与军队采购成本为优化目标,提出了应急器材柔性采购策略。通过建立企业储备策略与军队采购定价最优化模型,求解得到了在不同战争爆发概率及器材现货市场价格区间等外部环境因素下的军队最佳柔性定价及对应的企业最优储备策略,并通过实例分析验证了得出的决策结论。结果表明,最优策略的实施将有利于军队与企业共担应急器材数量储备风险。