Arrival and departure state distributions in the general bulk‐service queue

In this paper, we give an explicit relation between steady‐state probability distributions of the buffer occupancy at customer entrance and departure epochs, for the classical single‐server system G/G^[N]/1 with batch services and for the finite capacity case. The method relies on level‐crossing arguments. For the particular case of Poisson input, we also express the loss probability in terms of state probabilities at departure epochs, yielding probabilities observed by arriving customers. This work provides the “bulk queue” version of a result established by Burke, who stated the equality between probabilities at arrival and departure epochs for systems with “unit jumps.” © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 107–118, 1999     

爆扩桩抗拔承载力计算公式研究

目前关于扩底桩尤其是爆扩桩抗拔力计算公式很少。在有限的扩底桩计算公式中,普遍存在着对爆扩桩的承载机理不清楚,对扩大头作用的体现机理表达不准确等问题。首先介绍一些典型的抗拔计算公式,选出有代表性的且适用于爆扩桩的抗拔计算公式, 然后根据工程试桩的计算结果,结合理论分析对公式的合理性进行探讨,最后根据爆扩桩的抗拔机理和试验分析给出易于运用的软土中大直径爆扩桩的抗拔承载力计算公式,并给出相应的构造要求。     

基于运输问题的国防动员任务规划模型研究

国防动员任务规划为执行动员保障任务提供明确的方案计划,是高效有序开展国防动员协同保障的重要前提和关键环节,既要综合考虑各类影响因素,又要确保对接结果适时、适量、适地、适度.本文分析了动员任务规划的现实问题,通过梳理实际开展动员任务规划的阶段步骤,明确了动员任务规划模型的研究内涵和边界;在此基础上,建立了国防动员任务规划...     

A computationally efficient approach for determining inventory levels in a capacitated multiechelon production‐distribution system

The system under study is a single item, two‐echelon production‐inventory system consisting of a capacitated production facility, a central warehouse, and M regional distribution centers that satisfy stochastic demand. Our objective is to determine a system base‐stock level which minimizes the long run average system cost per period. Central to the approach are (1) an inventory allocation model and associated convex cost function designed to allocate a given amount of system inventory across locations, and (2) a characterization of the amount of available system inventory using the inventory shortfall random variable. An exact model must consider the possibility that inventories may be imbalanced in a given period. By assuming inventory imbalances cannot occur, we develop an approximation model from which we obtain a lower bound on the per period expected cost. Through an extensive simulation study, we analyze the quality of our approximation, which on average performed within 0.50% of the lower bound. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 377–398, 2000     

箭（弹）级间螺栓法兰连接结构准静载失效实验与数值仿真研究

基于火箭(导弹)级间螺栓法兰连接结构,简化设计并制作了一组原理性实验件,设计准静载加载实验测试系统,进行了两次准静载失效实验,并利用ABAQUS软件建立对应的有限元模型。实验中设计了螺栓力响应信号采集传感器,获得了螺栓力响应数据、加载力与加载位移等多组关键数据。根据实验效果和实测数据,分析了连接结构在准静载荷载作用下的失效机理,并对比验证了有限元模型数值模拟效果和精度与实验吻合较好。研究结论可为箭(弹)级间连接结构承载能力和失效实验设计提供参考。     

Reactor-grade plutonium and nuclear weapons: ending the debate

The claim that reactor-grade plutonium cannot or will not be used to produce nuclear weapons has been used to justify non-nuclear-weapon states’ large stockpiles of plutonium that has been separated from highly radioactive spent fuel. However, by using reduced-mass plutonium cores, it is possible to manufacture reliable nuclear weapons with reactor-grade plutonium. These weapons can have the same design, size, weight, and predetonation probability as weapons using weapon-grade plutonium and would require no special cooling. The increased radiation from reactor-grade plutonium could be easily managed by shielding and operational procedures. Weapons using plutonium routinely produced by pressurized-water reactors could have a lethal area between 40 percent and 75 percent that of weapons using weapon-grade plutonium. In the past, both Sweden and Pakistan considered using reactor-grade plutonium to produce nuclear weapons, and India may be using reactor-grade plutonium in its arsenal today. Despite claims to the contrary, the United States used what was truly reactor-grade plutonium in a successful nuclear test in 1962. The capability of reactor-grade plutonium to produce highly destructive nuclear weapons leads to the conclusion that the separation of plutonium, plutonium stockpiling, and the use of plutonium-based fuels must be phased out and banned.     

箭(弹)级间螺栓法兰连接结构冲击失效实验与数值仿真

基于火箭(导弹)级间螺栓法兰连接结构,简化设计并制作了一组原理性实验件,利用ABAQUS软件建立有限元模型,设计并进行了多次落锤冲击失效实验,其中包括轴向和横向两种工况,考虑了螺栓均布与非均布、螺栓直径和螺栓-栓孔间隙等不同结构特点。实验过程中采集了螺栓力时程响应数据、柱段关键点应变时程响应数据、锤头冲击力和冲击速度及连接界面开缝位移等多组数据。根据实验效果和实测数据,分析了连接结构冲击失效机理,并对比验证发现有限元模型数值模拟效果和精度与实验结果吻合较好。研究结论可为箭(弹)级间连接结构抗冲击设计提供参考。     

论提高灭火救援组织指挥能力

建设科学合理、准确高效的灭火救援作战组织指挥体系,能提高消防部队的组织指挥的能力,以最快、最有效的方法处置各类事故,真正做到＂拉得出、冲得上、打得赢＂。阐述了建立灭火救援作战组织指挥体系的基本要求,提出了提高灭火救援指挥员指挥水平的对策。     

军民融合产业内涵及范畴

发展军民融合产业是各级政府落实军民融合发展国家战略的重要抓手之一。针对军民融合产业界定不清等问题,从理论研究和实践工作层面梳理既有观点及演变趋势,形成对军民融合产业的客观认识。在此基础上,剖析军民融合产业的属性特征,从指导实践工作角度出发提出三种界定军民融合产业范畴及相关统计工作的合理化思路,并提出建立两级联动工作机制、开展国家工业基础中国防科研生产能力普查工作、试点开展军民融合产业分类标准及指标体系建设工作、加强军民融合产业统计数据质量监测等政策建议。     

战时铁路运输油料抢收模拟优化

战时,铁路运输油料抢收是一个受到各种随机因素影响的复杂过程,很难采用数学方法建立模型求解。以运筹学的排队论为建模指导思想,采用GPSSW语言对这一动态过程进行模拟,并对模拟结果进行统计分析,结合实际情况采用优化技术对模拟结果作出改进,从而得到最佳的抢收方案。结果表明,该模拟方法适用于解决此类半结构化问题,可为战时铁路运输油料抢收提供有效的决策支持。