A higher order coupled frequency characteristics study of smartmagneto-electro-elastic composite plates with cut-outs using finite element methods

This article deals with investigating the effect of cut-outs on the natural frequencies of magneto-electro-elastic (MEE) plates incorporating finite element methods based on higher order shear deformation theory (HSDT). In order to consider the influence of cut-out, the energy of the cut-out domain is sub-tracted from the total energy of the entire plate. The governing equations of motions are derived through incorporating Hamilton's principle and the solution is obtained using condensation technique. The proposed numerical formulation is verified with the results of previously published literature as well as the numerical software. In addition, this research focuses on evaluating the effect of geometrical skewness and boundary conditions on the frequency response. The influence of cut-outs on the degree of coupling between magnetic, electric and elasticfields is also investigated.     

基于时域平均的齿轮故障诊断

提出了信号时域平均处理的新算法,解决了周期截断误差对平均结果的影响,并对测取的齿轮箱齿轮故障振动信号进行了处理。实验结果表明:该方法在齿轮故障信号的处理中能够消除背景噪声的影响,取得比较理想的效果。     

一种基于神经网络的变换域数字水印提取算法

从理论上分析了变换域数字水印嵌入和提取过程,研究了图像处理和攻击对水印产生破坏的机理,并在此基础上提出了一种基于神经网络的变换域数字水印提取算法。实验证明,该算法对各种常见攻击具有较强的鲁棒性。     

建筑火灾烟气蔓延规律对火灾探测系统的影响

分析了烟在建筑物内部的蔓延规律,讨论了烟气的蔓延规律、气流速度、障碍物及房间高度对火灾探测系统的影响,得出研究火灾烟气蔓延规律对火灾探测系统的可靠性具有重要意义的结论。     

防空导弹的新家族——反精导武器防空导弹

现代精确制导武器对敏感点目标的威胁,主要表现在高的击毁概率和多发协同攻击上,保卫点目标的反精确制导武器防空导弹必须具有多目标通道和高速率全向射击能力;必须具有高的可靠性和对精确制导武器的击爆能力,将构成防空导弹系列中的一个新家族。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

差分跳频码性能检验研究

差分跳频是一种新的扩展频谱通信技术.在介绍差分跳频基本原理的基础上,将差分跳频的频率跳变过程建模成齐次马尔可夫链.分析了G函数的功能,重点讨论了差分跳频码性能的检验方法,包括不可约性、频隙滞留、均匀性和随机性检验,其中频隙滞留是首次提出应用于差分跳频码性能的检验.这些检验方法对于差分跳频G函数的设计具有一定的指导意义.     

TIME-VARYING CHARACTERISTICS OF SOUTH KOREA-UNITED STATES AND JAPAN-UNITED STATES MILITARY ALLIANCES UNDER CHINESE THREAT: A PUBLIC GOOD APPROACH

This paper investigates the nature of two military alliances under Chinese threat. The findings are as follows: First, South Korea does not consider China a significant threat while Japan and the United States have recognized China as a serious threat since the 1990s and the 2000s, respectively. Second, the relationship between South Korea and the United States is a true military alliance for all time periods, but the nature of the alliance has changed since the 1970s. Third, although Japan began to form an alliance relationship with the United States in the 1990s, Japan is considered a more significant ally by the United States. This paper implies that, should China provoke a military confrontation, it might be difficult to deduce a common solution among the three countries because of the different response to military threats from China.     

Strategic defense and attack for series and parallel reliability systems: reply 1 to comment 1

Kovenock and Roberson's [2011] comment provides initial work which has the potential, when suitably extended, to advance the research frontier. Kovenock and Roberson's paper consists of three sections. The first section is an interesting introduction. The second section, titled ‘Model and Main Result,’ provides no contribution beyond Hausken [2008a]. It consists of Equations (1)–(10) which are equivalent to equations developed by Hausken, and Equation (11) which is equivalent to the utility requirements u???0 and U???0 provided after Equation (17) in Hausken. The third section provides interesting ideas about mixed-strategy equilibria that can be extended in future research.     

战时装备调配保障决策模型构建研究

分析了战时装备调配保障决策的特点,运用模糊聚类分析法对装备调配保障对象进行了分组和优先级排序,以此为基础,运用目标规划法构建了战时装备调配保障决策模型,最后,通过实例验证了模型的可行性和有效性．