PC机并行口的扩展

本文介绍一种经济实用的并行口扩展板电路。实践证明,该电路工作性能稳定,操作方便可靠,适用于PC/XT,PC/AT机的I/O扩展。     

Investigation of the shock compression behaviors of Al/PTFE composites with experimental and a 3D mesoscale-model

The responses of AI/PTFE reactive materials (RMs) under shock compression were investigated by a single-stage gas gun.A 3D mesoscale-model was established based on micro-computed tomography(micro-CT) slice images and confirmed with experimental results.In the high-pressure stage,the com-posites reacted partially,whereas there were no deviations between the partially reacted Hugoniot and the inert simulation results.The simulation reveals that the Teflon matrix melting on the high shock pressure.Melts and decomposition of the PTFE accelerated the diffusion of the atoms.Thus,the reactions of the Al/PrFE composites are more like a combustion rather than a detonation.     

基于FEM/SPH算法的弹丸侵彻土体数值模拟

基于有限元法(FEM)和光滑粒子流体动力学(SPH)结合的算法,用数值模拟了钢质弹丸对钢筒约束土体的侵彻过程。基于ANSYS/LS-DYNA显式动力分析和LS-PrePost后处理软件,形象再现了钢质弹丸冲击作用下土体飞溅形成漏斗坑和直线通道的物理过程。侵彻深度计算结果与实验数据吻合较好,钢质弹丸的速度和加速度时程曲线图与理论分析一致,体现了FEM/SPH算法的精确性。研究结果表明FEM/SPH算法在模拟侵彻土体方面具有可行性和有效性。     

高超声速飞行器组合导航系统研究

为提高高超声速飞行器的导航精度,在SINS/GPS位置、速度组合导航模型基础上增加了GPS姿态信息,推导了姿态算法中姿态角误差与平台误差角的关系。通过理论分析说明了其可消除数学模型误差,提高系统的姿态精度,并以此建立了SINS/GPS组合导航系统姿态、位置、速度观测方程。通过仿真验证了该算法的有效性,结果表明SINS/GPS姿态、位置、速度组合导航可以有效提高高超声速飞行器导航定位精度。     

基于STK/X的航天器悬停应用仿真技术

针对基于STK/Connect典型模式航天仿真时需要同时启动STK软件的局限,在对STK/X组件技术进行深入研究的基础上,采用基于STK/X的仿真模式,通过STK/X组件提供的接口函数和相关交互命令,将STK引擎集成至航天器悬停应用仿真中,从而实现应用程序对仿真场景的控制与调用,并通过分析处理单元对通过交互所获取的STK场景中仿真数据的处理,对航天器悬停应用仿真效能进行了分析。该集成不仅充分利用了STK强大的轨道仿真能力,还有效提高了仿真程序整体效率。     

Investigating the Desirability of Navy Aircraft Service Life Extension Programs

Building on prior work on optimal replacement of aging aircraft, this paper presents three methodologies to evaluate prospective aviation Service Life Extension Programs (SLEPs) and applies these methodologies to US Navy F/A-18E/F data. While considerable uncertainty remains as to the values of key parameters (e.g. the cost of F/A-18E/F SLEPs), the preponderance of the evidence available at this juncture favors undertaking SLEPs on F/A-18E/Fs rather than replacing them with new Joint Strike Fighters.     

面向DSP的嵌入式远程调试环境设计

针对目前DSP软件开发环境存在的不足,提出了基于GDB构建远程调试环境的方案。介绍了GDB远程调试原理,详细讨论了远程调试环境设计中关键技术——调试服务器的设计。以TMS320C674x DSP为目标平台,对方案予以实现,针对C674x DSP特有的可变长指令和超长指令字架构,描述了调试服务器相应的实现方法。实验结果表明,基于GDB构建的面向DSP的嵌入式远程调试环境能够满足DSP应用软件调试的需要。     

基于察打任务的无人机作战效能评估

首先根据时敏目标打击的特点,分析了察打任务模式下的察打一体无人机的作战使用。然后对评估体系中察打一体无人机的侦察能力与打击能力相关性进行了分析,同时将任务可执行度作为无人机效能评估的一项动态权衡标准,建立了基于察打任务的无人机效能评估模型,并基于效能指标体系建立了各分项模型。最后通过算例验证了模型的可行性。     

载机扰动下SAR/GMTI旋转目标微多普勒特性分析

目标微动部件激励的雷达微多普勒信号稳定而独特,反映了该目标的本质特征。针对采用相位中心偏置技术(DPCA)的SAR/GMTI系统,研究存在载机扰动下的旋转目标的微多普勒特性。构建飞行平台与微动目标的几何模型,推导旋转目标的微多普勒信号模型,分析典型的载机纵向扰动对微多普勒时频特性构成的影响;并通过仿真实验,验证了上述理论分析的正确性。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016