U型钢板桩施工的滑坡动态勘察技术及数值模拟

为节省边(滑)坡灾害的应急加固时间,提高边(滑)坡处置的效率和质量,针对边(滑)坡在勘察阶段提出了基于U型钢板桩施工的动态勘察技术,即在静压植桩机压入U型钢板桩的同时,利用与其配套的压入管理系统设备与软件对压桩数据进行监测和分析,从而反馈出地层强度等信息。数值模拟中,为了能利用工程中所得压桩阻力图谱来反推地层信息,归纳总结了不同土体在桩压入时的应力云图和压桩阻力规律。结果表明:压桩阻力规律与地层信息之间存在对应关系,据此可判断地层强度特征等信息,数值模拟也为后续的现场试验研究提供了依据。     

多弯头管道磁致伸缩导波无损检测技术

为了研究超声导波在弯管中的传播特性及检测可行性,使用磁致伸缩导波仪器及传感器对多弯头管道进行了检测实验,并对弯管中导波的传播速度、模态转换、能量衰减等现象进行了探讨。结果表明:当弯管弯曲程度较小时,弯管中导波传播速度与直管中近似;弯管中导波存在明显的模态转换现象;弯管中导波能量随着时间近似呈指数形式衰减,且衰减规律与激励频率存在密切联系。该研究结果可以为复杂结构弯曲管道的导波检测提供参考。     

坦克排烟管热电转换模拟试验研究

为降低坦克排烟管的红外特性,设计了应用于坦克排烟管高温表面的热电转换方案,并进行了模拟试验和理论计算。结果表明：热电转换器件的开路电压和负载电压、负载电流随冷热面温差的增加呈线性增长,而输出功率、效率则以二次方的速度增长;多片热电转换器件组合能够实现所要求的电能输出。试验中热电系统产生的电能驱动散热风扇运转,说明热电转换用于高温度、高热通量场合实现红外抑制的目的是切实可行的。模拟试验表明：经热量转换和热量转移后热电转换系统表面温度较模拟坦克排烟管表面温度下降超过33％,说明利用热电转换方案实现坦克高温部位的红外抑制效果明显。     

不同腐蚀状态不锈钢管焊缝区 碱性腐蚀的电位噪声特征

利用电化学电位噪声方法检测了不同腐蚀状态304与316两种不镑钢管焊缝区试样在室温碱液中的腐蚀行为,并采用电化学噪声时域谱、频域谱进行了分析,结果表明:不同腐蚀状态焊缝试样的腐蚀电位及噪声时城谱特征不同,可利用电位噪声频城谱的高频斜率K值定性判定是否发生局部腐蚀,同时可根据频城谱中发生事件特殊频率fn区分材料的腐蚀状态...     

细晶钢的摩擦学性能初探

细晶钢作为新一代的钢铁材料,通过细化晶粒提高强度,改善其摩擦学性能。经试验对比细晶钢和45#钢在不同添加剂、不同负荷条件下的摩擦磨损情况,结果表明细晶钢在特定添加剂的高负荷条件下,其摩擦学性能优于45#钢。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

钢质管道挤压变形过程数值模拟

基于对钢质输油管道挤压变形原理的分析,建立上下刀具加载作用下钢质输油管道挤压变形模型,采用扩展拉格朗日方法求解三维接触挤压问题,完成20号无缝钢挤压变形过程的数值模拟。将模拟试验数据与前人实际试验数据进行对比与验证,模拟结果与实际试验结果吻合。该模型可以用于模拟不同规格管道挤压变形情况,得到管道挤压变形的位移、载荷和应力分布规律,为管道应急抢修提供理论和实践依据。     

联合编队作战行动方案建模

研究联合编队的作战行动方案问题,首先需要建立合理的任务模型。在基本作战样式基础上,针对联合编队任务特点,设计了一种联合编队作战行动方案的建模方法。该模型包含对海攻击和对空防御等5种基本作战样式,结合规划和调度两方面的特点,提供了资源和系统状态的描述机制。实例证明建模方案不仅具有可行性,而且丰富了作战行动方案的建模理论,对联合编队作战系统的研究、决策和建设具有一定的参考价值。     

钢结构制药厂房火灾特点及爆炸坍塌情形分析

通过对钢结构制药厂房（车间）的建筑结构、火灾特点的分析以及钢结构建筑发生坍塌和引发爆炸等情形的正确判断,为今后处置该类场所灾害事故的救援行动提供参考依据。     

碳钢中夹杂物诱发点蚀的规律和特性研究

选用5种低碳钢,通过浸泡试验、显微腐蚀试验和极化试验,考察了碳钢在3%NaCl(质量分数,下同)溶液中夹杂物诱发点蚀的规律和特点.结果表明:样品刚浸入溶液时其最初电位高于点蚀电位,钢中一些夹杂物活化,先诱发点蚀;局部活化使钢样的电位迅速下降,当降至点蚀电位之下,未发生点蚀或未充分诱发点蚀的夹杂物受到保护,不再活化;在阳极极化试验中,当钢样的电位极化到点蚀电位或点蚀电位以上,钢中的夹杂物几乎都会活化而诱发点蚀.