Cu粉粒径及含量对Ni/MH电池负极放电性能的影响

为了提高Ni/MH电池中储氢电极的放电性能,以电解Cu粉为充填材料与活性物质混合制备电极,研究Cu粉粒径及含量对电极性能的影响。研究发现,Cu粉粒径越小,含量越高,电极的放电容量、高倍率放电性能、及在低温和高温下的放电能力均提高,且Cu充填电极的性能优于Ni充填电极。Cu充填电极中析氢反应的交换电流密度较大,过电势较小,说明其电催化活性好,电极反应阻力小。SEM分析发现,充放电循环后的Cu充填电极,其储氢合金颗粒表面覆盖着一层细小Cu颗粒和丝状物,这是电极性能提高的主要原因。     

人工神经网络特征优化方法在模式识别中的应用

在模式识别中,特征量的选择及组合优化是设计模式识别系统的关键问题,它强烈地影响到分类器的设计及其性能。人工神经网络除了在模式识别中作为分类器应用之外,而且能够实现特征参数的提取。通过采用人工神经网络模型,对柴油机故障的特征量优化方法进行了研究,实现了对柴油机故障的特征提取及优化。     

随机振动激励下自行火炮的合理车速

自行火炮的悬挂装置,在路面和履带激励下工作。剧烈的振动将影响自行火炮的机动性,根据路面谱的资料,建立了激励频率与车速的关系;利用模态分析的方法,对悬挂装置进行有限元动力分析,得到了悬挂装置的动态特性。从避免共振发生的原理,提出了自行火炮的合理车速。     

紊流火焰生长的现象学模型

提出了一个紊流火焰生长的现象学模型,将预混合燃烧紊流火焰的生长过程与火焰瞬时尺度和基本的紊流特性参数联系起来,描述了火焰从层流传播到充分发展的紊流传播的全过程。计算结果与测量数据的比较显示了较好的一致性。     

燃烧驱动连续波DF化学激光器的输出光谱

利用光栅扫描记录方法测量了不同气流参数条件下,某燃烧驱动连续波ＤＦ化学激光器的输出光谱,将测量结果和数值计算结果进行了比较和分析。     

On the nature and scope of defence economics

Defence economics uses the tools of economics to study the defence sector and its domestic and international implications. Simple models require careful application in defence economics, since indirect effects may have counterintuitive impacts. For example, while certain arms races can lead to the outbreak of war, others may have the counterintuitive effect of discouraging the outbreak of war owing to mutual deterrence.

The world is now multipolar rather than bipolar, analogous to an oligopoly situation. This multipolar world can be analyzed by a qualitative characteristic function, where the formation of a potential coalition allows study of the shift from conflict to cooperation in international relations. Some new issues to be considered in this framework include accidental nuclear war, potential arms races and conflicts in the third world, and the proliferation of chemical weapons and missiles.     

Effects of Mg/PTFE pyrotechnic compositions on reignition characteristics of base bleed propellants and heating mechanism

The effects of magnesium/polytetrafluoroethylene (Mg/PTFE) pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the performance and range of base bleed projectiles (BBPs).Owing to a decrease in pressure and temperature when the BBP leaves the muzzle,rapid depressurization occurs,which extinguishes the base bleed propellant.The Mg/PTFE py-rotechnic composition pressed in the igniter of the base bleed unit (BBU) provides additional energy to the BBU via a chemical reaction.Thus,the extinguished base bleed propellant is reignited under the effect of high-temperature combustion gas jets from the igniter.In this study,a numerical analysis is conducted to evaluate the effects of PTFE and Mg granularity as well as Mg/PTFE pyrotechnic compo-sitions.Owing to the rapid depressurization,the temperature and pressure was found to decrease for different Mg/PTFE pyrotechnic compositions.However,the depressurization time increased as the PTFE granularity increased,the Mg granularity decreased,and the Mg content increased.When the pressure in the combustion chamber of the BBU decreased to the atmospheric pressure,the combustion gas jets from the igniter expand upstream (rather than downstream).However,these combustion gas jets exhibit different axial and radial expansion characteristics depending on the pyrotechnic compositions used.The results show that the reignition delay time,td,of the base bleed propellant was 377.608,94.27,387.243,523.966,and 221.094 ms for cases A-E,respectively.Therefore,it was concluded that the Mg/PTFE pyrotechnic composition of case B was the most beneficial for the reignition of the base bleed propellant,with the earliest addition of energy and mass to the BBP.     

基于特征结构配置的车辆主动悬架控制器设计

基于特征结构配置参数化方法,提出了车辆主动悬架控制器设计方法,其目的是设计一组状态反馈控制器,使得闭环结构系统具有希望极点和特征向量。该方法提供的自由参数,可用来满足系统的鲁棒性能等指标。该方法直接基于车辆悬架系统的参数矩阵,故便于工程应用。对车辆悬架系统进行仿真分析,结果表明该设计方法简单有效。     

频率捷变雷达信号相参特征的表述

频率捷变雷达信号分选是电子对抗领域信号处理与应用的难题,探索新的分选特征参数是实现对频率捷变雷达信号高效准确分选的手段之一。提出了一种基于Wigner-Ville分布(WVD)的频率捷变雷达信号相参特征的表述。介绍了典型频率捷变方式、频率捷变信号模型及WVD的离散过程,推导了频率捷变脉冲重构信号的WVD模型并进行仿真实验。实验结果表明,频率捷变雷达信号的WVD二维图可作为一种相参特征的表述,且该表述可为频率捷变雷达信号分选提供新思路。     

喷气燃料中特征真菌Amorphotheca resinae的生物学性状研究

通过提供不同的碳源对喷气燃料中检测出的特征真菌Amorphotheca resinae(A.resinae)进行培养,观察菌落和孢子形态,研究其生物学性状;在液体培养基中对其进行振荡培养时出现了油包水现象,从而对特征真菌污染过的油、水相进行表面张力测定。研究结果表明:A.resinae在固体培养基中生长缓慢且出现角变现象;孢子直径仅约1μm;被特征真菌污染过的水相表面张力降低,推测培养A.resinae时可能产生了生物表面活性物质。