激光辐照下45#钢板响应特性

采取实验和数值模拟相结合的方法对激光辐照45#钢板的响应特性进行研究。基于连续光纤激光发射系统,开展钢板的激光辐照实验,得到温度场分布及靶板的烧蚀穿孔特性;基于ANSYS建立靶板有限元模型,模拟激光辐照下靶板的热响应过程,得到了靶板厚度、激光功率和光斑直径等因素对靶板温度分布及靶板穿孔特性的影响规律。     

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

This paper studies the four-engine liquid rocket flow field during the launching phase. Using three-dimensional compressible Navier-Stokes equations and two-equation realizable k-epsilon turbulence model, an impact model is established and flow fields of plume impinging on the two different shapes of flame deflectors, including wedge-shaped flame deflector and cone-shaped flame deflector, are calcu-lated. The finite-rate chemical kinetics is used to track chemical reactions. The simulation results show that afterburning mainly occurs in the mixed layer. And the region of peak pressure occurs directly under the rocket nozzle, which is the result of the direct impact of exhaust plume. Compared with the wedge-shaped flame deflector, the cone-shaped flame deflector has great performance on guiding exhaust gas. The wedge-shaped and cone-shaped flame deflectors guide the supersonic exhaust plume away from the impingement point with two directions and circumferential direction, respectively. The maximum pressure and temperature on the wedge-shaped flame deflector surface are 37.2% and 9.9% higher than those for the cone-shaped flame deflector. The results provide engineering guidance and theoretical significance for design in flame deflector of the launch platforms.     

Numerical research on adverse effect of muzzle flow formed by muzzle brake considering secondary combustion

The simulation of the artillery interior and intermediate ballistics problem is performed to investigate the influence of a gas dynamics device, muzzle brake, on the muzzle hazard phenomena, such as flash and blast waves. The correlation of the chemical reactions with the characteristics of the muzzle flow field is analyzed by the simulation for a further understanding of the secondary combustion phenom-enon of the muzzle flow. The novel structure of muzzle flow caused by the muzzle brake is presented by the simultaneous solution of the interior ballistics model and multi-species Navier-Stokes equations in order to analyze the influence of the muzzle brake structure on the chemical reactions. The secondary combustion of the muzzle flow due to the oxygen-supplement chemical reactions is obtained by the chemical reaction kinetic model. The interaction of the blast waves released from the muzzle brake is illustrated in detail and the mechanism of the formation of muzzle flash is analyzed. This research provides a reference for the studies on the suppression of the muzzle flash.     

On the asymptotic optimality of algorithms for the flow shop problem with release dates

We consider the nonpermutation flow shop problem with release dates, with the objective of minimizing the sum of the weighted completion times on the final machine. Since the problem is NP‐hard, we focus on the analysis of the performance of several approximation algorithms, all of which are related to the classical Weighted Shortest Processing Time Among Available Jobs heuristic. In particular, we perform a probabilistic analysis and prove that two online heuristics and one offline heuristic are asymptotically optimal. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

基于柔性基础的双层隔振系统概率灵敏度分析

对基于柔性基础的双层隔振系统的功率流传递特性进行了分析,利用有限元分析软件ANSYS计算了传递到基础的功率流,并用概率灵敏度分析方法研究了功率流对隔振系统给定参数的灵敏度,为双层隔振系统的优化设计奠定了基础.     

铜包钢绞合导体与铜钢混绞导体的耐蚀性比较

通过电化学腐蚀原理的分析,认为被复线用铜包钢绞合导体是用铜钢混绞导体耐蚀性的3倍,有效提高了被复线的野外使用性能.与装备电缆通用的钢丝、铜丝混绞或混编导体或屏蔽层相比,铜包钢丝还兼有更好的耐蚀性、导电性、导磁性和力学性能,是一类优良的电磁屏蔽用导体材料,为装备线缆的设计采用和性能提高提供了防腐依据.     

一类有增益网络的最大流模型

一般带容量限制的网络图中流出源点与流入汇点的流量相等,但在实际应用中,存在一类流量经过弧发生变化的网络,使得流出源点与流入汇点的流量不相等。针对此类问题,建立了增益网络最大流模型,并通过增设虚弧将增益网络转换成循环网络,利用循环网络中汇点流量瞬间平衡的优点简化了模型。最后,结合实例进行分析,编写程序对实例进行了计算,计算结果验证了该模型的有效性。     

高频电磁注入替代辐照耦合装置的设计研究

为提高电磁注入法的应用频带范围,提出基于定向耦合原理的电磁注入方法,并以某天线及其射频前端构成的互连系统为试验对象,利用单定向耦合器作为注入装置进行了辐照和注入试验,试验证明该注入方法能够准确替代连续波辐照效应试验．进而,理论分析耦合装置的特性并对该装置进行改进,提高其工程实用性．最后,设计耦合装置的指标并计算了对应的散射矩阵,制作完成注入装置的样机．结果表明：耦合装置监测端电压与等效源之间的关系会受到受试设备状态的影响．将两单定向耦合器级联作为注入装置,并以监测端的功率作为等效依据,可保证监测结果在高频时不受线缆上驻波的影响,提高试验的准确性．     

油-水旋流器流场数值模拟研究

采用改进后的双方程湍流模型和SIMPLE计算方法,对切流式单入口油-水旋流器内部流场进行了模拟研究。结果表明:旋流器内部三维流场各向异性,即同一位置流体在不同方向的流动参数变化很大,流体质点在不同条件下的运动轨迹、速度、分离特性等方面都有较大差别;圆柱段与圆锥段的流场在柱锥结合面发生变化,旋流器的主要分离过程在圆锥段完成;单入口旋流器的流场中心与几何中心有偏差,对流场的稳定和分离会产生影响。该模拟结果与他人所做实验结果比较接近,说明该模型和算法是可靠的,为旋流器的实际应用提供了参考。     

供油挂车泵机油温度变化规律实验研究

通过实验研究了100 mm野战输油管线供油挂车泵运行时及停运后机油温度随时间的变化规律。采用数据拟合、回归分析等数学方法,分别研究了供油挂车泵空载和带负荷两种情况下机油温度的变化规律;针对供油挂车泵各种工作状态,分析了影响机油温度变化的主要因素,建立了温度变化数学模型。研究结果为100 mm和150 mm野战输油管线供、输油挂车泵机组模拟器的研制提供了一定参考。