Controllable combustion behaviors of the laser-controlled solid propellant

Microsatellites have been widely applied in the fields of communication,remote sensing,navigation and science exploration due to its characteristics of low cost,flexible launch mode and short development period.However,conventional solid-propellant have difficulties in starting and interrupting combustion because combustion is autonomously sustained after ignition.Herein,we proposed a new type of solid-propellant named laser-controlled solid propellant,which is sensitive to laser irradiation and can be started or interrupted by switching on/off the continuous wave laser.To demonstrate the feasibility and investigate the controllable combustion behaviors under different laser on/off conditions,the combus-tion parameters including burning rate,ignition delay time and platform pressure were tested using pressure sensor,high-speed camera and thermographic camera.The results showed that the increase of laser-on or laser-off duration both will lead to the decrease of propellant combustion performance during re-ignition and re-combustion process.This is mainly attributed to the laser attenuation caused by the accumulation of combustion residue and the change of chamber ambient temperature.Simultaneously,the multiple ignition tests revealed that the increased chamber ambient temperature after combustion can make up for the energy loss of laser attenuation and expansion of chamber cavity.However,the laser-controlled combustion performance of solid propellant displayed a decrease trend with the addi-tion of ignition times.Nevertheless,the results still exhibited good laser-controlled agility of laser-controlled solid propellant and manifested its inspiring potential in many aspects of space missions.     

激励器结构参数对合成射流影响的试验研究

为了设计高性能的合成射流激励器,实验采用热线风速仪测量激励器出口的流动速度,对不同大小激励器、不同出口形状激励器、单 双膜激励器以及金属振动膜处于不同装配受压状态下的激励器分别进行了试验。实验结果显示:激励器的结构决定了合成射流激励器的性能;激励器出口射流平均速度除了与激励器大小、出口面积有关外,还与出口形状有关,采用方孔 矩形孔形式的开口有利于建立较强的合成射流;双膜与单膜工作相比,合成射流最大速度基本上是成两倍关系;金属振动膜的安装形式(受压状态)不影响合成射流随频率的变化规律,但对合成射流速度影响很大,当激励器振动膜处于螺栓拧紧受压状态时,与振动膜不受压状态相比,合成射流出口速度几乎下降了一个数量级。     

海水中稳恒电流电场的点电极计算模型

根据点电极基本假设,利用均匀介质中稳恒电流场与静电场的相似性,分别采用分离变量法和镜像法计算了点电极稳恒电流场在空气 海水 海床三层介质平行界面模型下的电位分布,从而得到了海水中稳恒电流电场的计算模型.计算结果表明:点电极的电场分布具有明显的特征,可作为舰船电场电极阵列模拟的计算单元.     

火炮装药温度分布的数值模拟

针对火炮弹药的特点,建立了弹药的二维轴对称模型,并在圆柱坐标系下,用控制容积积分法导出一组差分离散格式。采用收敛速度快的块迭代法解代数方程组。实验数据表明数值计算的结果和实测值基本一致,经进一步研究可以用于火炮装药的温度测量。     

数组越界软件测试系统的设计与实现

软件测试系统的研制是现阶段软件测试领域研究的一个热点.首先针对C/C 语言常见数组越界错误类型进行了分析,介绍了软件测试的一些基本概念,而后给出了软件测试系统设计,对系统设计的各个阶段进行了说明,并且给出了一种错误类型检查的算法设计,它在软件测试检测中具有通用性和代表性,最后给出了软件测试的实验结果.     

非均布应力场中内埋裂纹的应力强度因子

在内埋裂纹线性线弹簧模型的基础上,通过引入二维权函数将裂纹面上的非均布载荷进行均布化等效,求解了中心内埋椭圆形裂纹在沿板厚非均匀分布应力场中的应力强度因子,列出了问题的奇异积分方程,利用Gauss-Chebyshev方法求解了在4种应力场分布情形下的数值结果,并与已有文献的解进行了比较,当a0/c0 ＜0.4、a0/h≤0.3时,两者结果具有较好的一致性,表明了本文方法的合理性和可靠性.     

An efficient metaheuristic for integrated scheduling and staffing IT projects based on a generalized minimum cost flow network

Scheduling IT projects and assigning the project work to human resources are an important and common tasks in almost any IT service company. It is particularly complex because human resources usually have multiple skills. Up to now only little work has considered IT‐specific properties of the project structure and human resources. In this article, we present an optimization model that simultaneously schedules the activities of multiple IT projects with serial network structures and assigns the project work to multiskilled internal and external human resources with different efficiencies. The goal is to minimize costs. We introduce a metaheuristic that decomposes the problem into a binary scheduling problem and a continuous staffing problem where the latter is solved efficiently by exploiting its underlying network structure. For comparison, we solve the mixed–binary linear program with a state–of–the–art commercial solver. The impacts of problem parameters on computation time and solution gaps between the metaheuristic and the solver are assessed in an experimental study. Our results show that the metaheuristic provides very favorable results in considerable less time than the solver for midsize problems. For larger problems, it shows a similar performance while the solver fails to return feasible solutions. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 111–127, 2012     

k-ary n-cube中的移动气泡流控策略

在k-ary n-cube网络中,气泡流控是一种有效、实用的死锁避免技术,它不必依赖虚通道就能避免环网中出现的死锁问题。如果流控策略能感知到维度内缓冲区的总体使用情况,就能够更加高效地进行调度,从而提高网络性能。为了避免关键气泡机制引起的阻塞,提出了伪报文协议;结合伪报文协议,设计了移动气泡流控策略,它有效实现了维度内的全局资源感知能力。与局部气泡流控相比,路由器每条输入通道仅设置一个报文缓冲区就可以避免环网中的死锁,即最小资源需求减少了一半。网络模拟结果表明,该机制不会出现永久阻塞;在distribute、hotregion和uniform传输模式中,该机制可以有效提高网络吞吐率20%以上,并且在网络饱和后吞吐率依然维持稳定。     

战时野战通信装备随机备件优化方法

随着模块化技术在军事领域的广泛应用,通信装备的战场抢修通常采取换件修理的方式。针对战时野战通信装备随机模块化备件的配置问题,建立了装备战备完好性和费用约束的优化模型,并给出了遗传算法的求解过程。通过实例分析表明该方法能够在战时为装备配置数量合理的备件,使装备备件在满足战备完好性的基础上携行量最少。     

一类有增益网络的最大流模型

一般带容量限制的网络图中流出源点与流入汇点的流量相等,但在实际应用中,存在一类流量经过弧发生变化的网络,使得流出源点与流入汇点的流量不相等。针对此类问题,建立了增益网络最大流模型,并通过增设虚弧将增益网络转换成循环网络,利用循环网络中汇点流量瞬间平衡的优点简化了模型。最后,结合实例进行分析,编写程序对实例进行了计算,计算结果验证了该模型的有效性。