运动激光辐照圆柱薄壳温度场的数值模拟

对圆柱薄壳在四种不同运动模式激光源辐照下的温度场分布进行了分析研究。运用傅立叶级数展开法推导了在不同运动模式激光源作用下圆柱薄壳温度场的解析表达式,并对该解析表达式进行了编程计算,其计算结果与有限元解吻合良好。详细分析了旋转角速度与平动速度对圆柱壳温升分布的影响,发现在往复运动加热模式下光斑区域的温升变化最为剧烈。计算结果为导弹的抗激光辐射提供了理论依据。     

气氧甲烷溅板式层板喷注器燃烧特性试验分析

采用试验方法分别对单喷嘴和多喷嘴溅板式层板喷注器燃烧特性进行研究,考察不同工况下喷注器面板热载情况,得到不同混合比、不同结构参数对燃烧室压力分布和燃烧效率的影响规律。试验结果表明:混合比对多喷嘴喷注器燃烧室压力影响不大,但对燃烧效率有较大影响。对于单喷嘴喷注器,燃烧效率随着混合比的增加而增高。相同条件下,增大扩张角及出口层宽度有利于提高喷注器燃烧效率,但会引起喷注面板热载增大,各喷注器喷注面板均产生不同程度的变形或失效。该结果对于正确指导层板式喷注器的设计以及筛选喷注器结构具有重要意义。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

Optimization and mediated bartering models for ground delay programs

The Federal Aviation Administration (FAA) and the airline community within the United States have adopted a new paradigm for air traffic flow management, called Collaborative Decision Making (CDM). A principal goal of CDM is shared decision‐making responsibility between the FAA and airlines, so as to increase airline control over decisions that involve economic tradeoffs. So far, CDM has primarily led to enhancements in the implementation of Ground Delay Programs, by changing procedures for allocating slots to airlines and exchanging slots between airlines. In this paper, we discuss how these procedures may be formalized through appropriately defined optimization models. In addition, we describe how inter‐airline slot exchanges may be viewed as a bartering process, in which each “round” of bartering requires the solution of an optimization problem. We compare the resulting optimization problem with the current procedure for exchanging slots and discuss possibilities for increased decision‐making capabilities by the airlines. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于MSP430单片机的海浪水压场自动测量系统

提出了基于MSP430单片机的水压场自动测量系统的设计方案和实现方法并进行了实际测量.解决了自动测量系统中的低噪声、低功耗、高分辨率、大容量存储等关键技术.实验结果表明:该系统具有自动运行、电池供电、记录时间长等特点.适于高海况条件下的海浪水压场的测量.     

架构和模式在水声信息流仿真软件中的应用

水声信息流仿真软件系统涉及多目标、多声纳以及多变的海洋环境.仿真软件的复用性是现代软件工程的重要性能指标.针对系统开放性的特点,在领域分析模型的基础上,采用了面向对象方法设计仿真软件模型.为了满足软件多层次复用的需求,应用软件架构技术和设计模式设计仿真软件.根据水声信息流仿真软件需求,系统划分为四层结构;按功能,层又可分解为包.可复用的设计模式用于设计不同层和包中类之间的关系.提出的仿真软件模型具有良好的可扩充性与可复用性.     

土体泊松比对压入管桩单桩挤土位移场的影响

基于ABAQUS有限元软件,采用主从接触算法模拟桩-土相互作用、修正剑桥模型作为土体本构模型,通过在桩顶施加竖向位移荷载以及合适的网格划分技术建立了较为符合压入管桩压桩实际的有限元模型。利用得到的有限元模型模拟了压入管桩压桩产生的挤土位移场,对不同泊松比时压入管桩单桩挤土位移场进行了对比分析。结果表明:不同泊松比时竖向和水平挤土位移场沿深度方向和径向的分布规律趋于一致;土体泊松比的变化会对压入管桩压桩产生的竖向和水平挤土位移场产生较大影响;泊松比越大,压桩产生的竖向和水平挤土位移越大。     

内编队地球重力场测量性能数值分析

内编队系统通过实现内卫星纯引力轨道环境和内卫星精密定轨,完成高精度地球重力场测量,实现了不依赖于加速度计的重力卫星实施新途径。针对内编队重力场测量性能难以解析分析的情况,基于MATLAB并行程序设计进行了重力场测量数值模拟,获得了内编队重力场测量的有效阶数及其精度。在内编队轨道高度为300km、内卫星干扰力为1.0×10-10m/s2、外卫星定轨精度为3cm、内外卫星相对状态测量精度为1mm的条件下,计算得到内编队测量重力场的有效阶数为72,相应的大地水准面累积误差为44cm,重力异常累积误差为4.5mGal,由此可知内编队测量重力场的有效阶数主要分布在低阶部分。     

失去润滑条件下弧齿锥齿轮传动系统瞬态温度场Simulink仿真分析

根据传热学理论和热网络法,以某型直升机尾减速器弧齿锥齿轮传动系统为研究对象,建立了其温度场Simulink仿真计算模型。基于该模型,计算获得该传动系统正常润滑条件下的稳态温度场,并以它作为初始条件计算分析该传动系统失去润滑条件下的瞬态温度场,为预测该弧齿锥齿轮传动系统在失去润滑条件下的干运转生存能力提供理论依据。