Dynamic analysis of a guided projectile during engraving process

The reliability of the electronic components inside a guided projectile is highly affected by the launch dynamics of guided projectile. The engraving process plays a crucial role on determining the ballistic performance and projectile stability. This paper analyzes the dynamic response of a guided projectile during the engraving process. By considering the projectile center of gravity moving during the engraving process, a dynamics model is established with the coupling of interior ballistic equations. The results detail the stress situation of a guided projectile band during its engraving process. Meanwhile, the axial dynamic response of projectile in the several milliseconds following the engraving process is also researched. To further explore how the different performance of the engraving band can affect the dynamics of guided projectile, this paper focuses on these two aspects: (a) the effects caused by the different band geometry; and (b) the effects caused by different band materials. The time domain and frequency domain responses show that the dynamics of the projectile are quite sensitive to the engraving band width. A material with a small modulus of elasticity is more stable than one with a high modulus of elasticity.     

Effect of welding processes and consumables on fatigue crack growth behaviour of armour grade quenched and tempered steel joints

Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints.     

我国警卫工作改进历程考察与思考

在考察我国警卫工作改进历程的基础上,对警卫工作改进进行了深入思考。提出我国警卫工作改进始终坚持“既要保证安全,又不脱离群众”这一主题;始终坚持党委和政府的领导,坚持制度化、规范化建设;体现在路线警卫工作、住地警卫工作和现场警卫工作三个方面。     

环管型燃烧室喷雾燃烧DES模拟

为研究燃气轮机燃烧室内复杂的两相三维湍流燃烧问题,采用基于Realizable k-ε模型的分离涡模拟(DES)方法对环管型燃烧室进行喷雾燃烧数值模拟.数值模拟结果表明:DES模拟在燃烧区发挥出大涡模拟(LES)的作用,能获取结构复杂的流场、温度场和涡量场,其对流场内涡结构的捕捉和分辨能力明显强于传统的RANS(雷诺时均N-S方法)模拟.与实验数据对比发现,DES模拟所得燃烧产物含量和燃烧室出口温度分布更符合.因此,DES方法可用于复杂形状燃烧室的燃烧数值模拟,能够避免RANS模型对湍流脉动进行平均处理导致耗散过大、抹平涡结构的缺点,从而可获取更准确的计算结果.     

A novel gradient approach for optimal design and sensitivity analysis of EWMA control charts

Conventional control charts are often designed to optimize out‐of‐control average run length (ARL), while constraining in‐control ARL to a desired value. The widely employed grid search approach in statistical process control (SPC) is time‐consuming with unsatisfactory accuracy. Although the simulation‐based ARL gradient estimators proposed by Fu and Hu [Manag Sci 45 (1999), 395–413] can alleviate this issue, it still requires a large number of simulation runs to significantly reduce the variance of gradient estimators. This article proposes a novel ARL gradient estimation approach based on integral equation for efficient analysis and design of control charts. Although this article compares with the results of Fu and Hu [Manag Sci 45 (1999), 395–413] based on the exponentially weighted moving average (EWMA) control chart, the proposed approach has wide applicability as it can generally fit into any control chart with Markovian property under any distributions. It is shown that the proposed method is able to provide a fast, accurate, and easy‐to‐implement algorithm for the design and analysis of EWMA charts, as compared to the simulation‐based gradient estimation method. Moreover, the proposed gradient estimation method facilitates the computation of high‐order derivatives that are valuable in sensitivity analysis. The code is written in Matlab, which is available on request. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 223–237, 2014     

舰艇编队防空过程建模及分析

防空作战是大型水面舰艇编队的主要作战样式之一。运用PEPA(性能评价过程代数)方法对舰艇编队防空作战全过程进行有效建模,形式化描述了预警探测、情报传递、命令下达、防空拦截等作战主要过程。建立的PEPA模型具有层次化结构,考虑了要素间相互协作,体现了编队防空作战分布、并发的特点。通过对建立的PEPA模型进行性能指标选择和稳定状态分析,得到了不同因素对编队能力发挥的影响情况,获得了防空作战的基本要素组成,从而提供了一种解决舰艇编队问题的新方法。     

数值模拟气/气喷嘴速度比对燃烧性能的影响

为研究应用于全流量补燃循环发动机的不同气/气喷嘴得到的燃烧流场,通过求解NavierStokes方程组,对不同燃料与氧化剂速度比下的流动燃烧过程进行了数值计算,计算结果与实验结果吻合。仿真结果表明:增加速度比能使燃烧火焰面提前,燃烧效率变大。如果发动机的长度受到限制,可以适当增加速度比以实现高效燃烧。     

舰炮火控雷达实测误差时序特性分析建模

针对舰炮火控雷达高精度实时仿真建模的问题,运用高斯分布和正态平稳过程的两种误差序列生成方法,建立火控雷达简化仿真模型。通过对某火控雷达实测数据误差的统计及时序相关性分析,完成误差序列仿真生成与验证,给出了实现舰炮火控雷达探测误差仿真的优选方法。实践证明,正态平稳模型的误差生成方法可以有效满足新型舰炮仿真试验火控雷达建模要求。     

AFRICA'S TRIPLE TRANSITION

Sub-Saharan Africa has witnessed the end of foreign colonial rule, the rise and fall of autocratic political regimes, and the disappearance of statist command economies. The challenges were to turn populations into coherent nations owing allegiance to the state; to democratise the state structures that govern these populations; and to liberalise the rules that regulate economic transactions. An important source to assess these prospects are the views and attitudes of ordinary Africans. This essay reflects on the original data derived from a crossnational research project. Nine African states were surveyed between 1999 and 2000. An attempt is made to gather some propositions from the analysis of the data. Many present serious challenges to common wisdom about African politics. It appears that the process of nationbuilding has created coherent political communities with high levels of national identity; that democratising the state in Africa builds on existing indigenous demands from ordinary Africans; and that economic liberalisation proceeds in the face of a mixed set of values about market and state.     

Public opinion: A powerful predictor of U.S. defense spending

Public opinion survey responses regarding the desirability of changes in defense spending can be compressed into a single variable, the public opinion balance, which, when accompanied by a control variable measuring the proportion of responses in the “residuum” (no opinion or keep the status quo), permits an accurate prediction of subsequent changes in the rate of change of U.S. defense outlays from the mid‐1960s through the 1980s. This finding cannot be interpreted as a simple case of “the public got what it wanted,” however, because public opinion was not autonomous or spontaneous, and defense decision makers themselves played a central role in shaping public opinion.