Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

温度对半导体激光器退化的影响

采取等效电路模型仿真和加速退化试验相结合的方法研究温度对半导体激光器不同退化模式的影响规律。针对半导体激光器有源区退化和腔面退化进行分析,发现有源区退化会使半导体激光器阈值电流增大,而腔面退化会使半导体激光器斜率效率减小;进行了半导体激光器热特性建模与仿真,发现温度升高会使半导体激光器阈值电流增大;利用半导体激光器加速退化试验平台进行了半导体激光器加速退化试验。仿真与试验结果证明:温度升高会加剧半导体激光器腔面退化,而对有源区退化无显著影响。上述结论对进一步完善半导体激光器温度-退化仿真模型,研究温度对半导体激光器退化的作用机理和防护措施有积极作用。     

Pricing and capacity allocation strategies: Implications for manufacturers with product sharing

Emerging sharing modes, like the consumer-to-consumer (C2C) sharing of Uber and the business-to-consumer (B2C) sharing of GoFun, have considerably affected the retailing markets of traditional manufacturers, who are motivated to consider product sharing when making pricing and capacity decisions, particularly electric car manufacturers with limited capacity. In this paper, we examine the equilibrium pricing for a capacity-constrained manufacturer under various sharing modes and further analyze the impact of capacity constraint on the manufacturer's sharing mode selection as well as equilibrium outcomes. We find that manufacturers with low-cost products prefer B2C sharing while those with high-cost products prefer C2C sharing except when the sharing price is moderate. However, limited capacity motivates manufacturers to enter into the B2C sharing under a relatively low sharing price, and raise the total usage level by sharing high-cost products. We also show that the equilibrium capacity allocated to the sharing market with low-cost products first increases and then decreases. Finally, we find that sharing low-cost products with a high limited capacity leads to a lower retail price under B2C sharing, which creates a win-win situation for both the manufacturer and consumers. However, sharing high-cost products with a low limited capacity creates a win-lose situation for them.     

火灾事故调查的现状与对策

阐述当前我国火灾事故调查现状 ,分析当前火灾事故调查工作存在的问题 ,并提出了加强火灾事故调查工作的建议。     

军民融合与技术创新

军民融合成为适应时代和平主旋律的一种新的国际趋势。随着现代科学技术的发展,技术创新有助于促进我国转变经济增长方式、有助于建设创新型国家、有助于增强我国的综合国力。军民融合与技术创新两者并不是相分离的,技术创新需要军民融合的不断深化提供资金、人才以及法律支持,同时军民融合促进技术创新模式选择。     

电磁轨道发射装置动态电感梯度分析

推导了导轨间磁场均匀分布和非均匀分布两种情况下电感梯度数学计算模型。引入了速度频率来模拟电枢发射过程速度趋肤效应,对导轨二维模型以及三维电磁场模型进行时谐仿真,并将获得的单位长度电感以及电感梯度,分别用于电气仿真系统中电感和电枢推力的计算。电气仿真和试验结果表明,电流和出口速度误差均在2%以内,证明了动态电感梯度分析及参数提取方法的正确性和准确性。     

基于自适应二阶终端滑模的航天器有限时间姿态机动算法

针对航天器有限时间姿态机动问题,提出一种自适应二阶终端滑模控制算法。设计一种终端滑模面,保证系统状态能够在有限时间内沿滑模面收敛到系统原点;为克服系统抖振,设计了二阶终端滑模控制器,并采用参数自适应估计项补偿系统中的外部干扰力矩。基于Lyapunov函数法证明了二阶自适应终端滑模控制器能够保证闭环系统实际有限时间稳定。仿真结果表明,提出的姿态机动算法响应速度快、精度高,能够有效实现对系统抖振和外部干扰的抑制,具有重要的科学意义和工程应用价值。     

多样化军事任务装备物资储备模式研究

针对多样化军事任务的特点,分析了其对装备物资储备提出的新要求,并进一步从储备主体、储备形态、储备方式及储备保障等方面提出了多样化军事任务装备物资一体化储备模式．研究结论对加强多样化军事任务装备物资储备体系建设具有积极的指导意义．     

应用于四旋翼无人机角速度估计的几何滑模观测器设计

对四旋翼无人机的角速度进行估计时,传统的基于单位四元数的滑模观测器需要引入强制比例重调,因而影响了跟踪精度。本文提出一种基于数值积分的李群方法的滑模观测器设计框架。该算法基于等变映射思想,在齐性流形空间的等价李代数空间中设计滑模反馈,从而避免了直接在流形空间中设计反馈的复杂性,并消除了传统方法在每个积分步骤中强制加入的比例重调,提高了观测器的跟踪性能。仿真结果表明,几何滑模观测器算法可以有效的对四旋翼无人机的角速度进行估计。     

基于航路点跟踪的AUV回收控制

针对军事侦察和海洋观测领域中对自主水下航行器(AUV)自主回收能力的需求,研究了AUV自主回收中的航路点跟踪控制问题.在海流干扰作用下,设计航路点规划跟踪路径,然后运用自适应滑模方法设计AUV的动力学控制规律.采用横向跟踪控制算法,使AUV精确地沿着规划的运动路径进入回收器中.仿真结果表明,所设计的控制规律是有效的,AUV能较好地完成航路点的跟踪任务,并最终到达回收器中实现了对接.