特大规模组合电路高速测试生成系统ATGTA-1

针对特大规模组合电路和全扫描设计电路提出了一种高速测试生成方法，并建成了相应的测试生成系统ＡＴＧＴＡ－１。该系统采用有限回溯测试模式产生方法生成测试码，采用ｎ（机器字长）个测试码并行的单故障传播方法模拟验证测试覆盖。测试生成与故障模拟为ｎ对１紧耦合集成方式。该系统运行１０个Ｂｅｎｃｈｍａｒｋ电路，取得了低测试长度、高故障覆盖、高效率的良好效果。     

发射药的分解机理及其安定性研究

在研究发射药中硝酸酯的分解机理及其与发射药安定性关系的基础上,分析了热分解,水解和自动催化作用对发射药安定性的影响,以色谱法和粘度法等实验手段探索发射药安定性的变化规律,通过不同温度下发射药老化过程的动力学研究,提出了确定发射药安全使用寿命的可靠方法。     

单质炸药和样品混合炸药热分解反应动力学参数的研究

本文用差示扫描量热仪(DSC7)测得了几种单质炸药和样品混合炸药的非等温DSC曲线,对热分解反应速率方程进行了研究,编制了由一条非等温DSC曲线的信息计算炸药热分解反应动力学参数的程序,并证明DSC的线性升温速率对动力学参数没有明显影响。     

Solution algorithms for the parallel replacement problem under economy of scale

We consider the parallel replacement problem in which machine investment costs exhibit economy of scale which is modeled through associating both fixed and variable costs with machine investment costs. Both finite- and infinite-horizon cases are investigated. Under the three assumptions made in the literature on the problem parameters, we show that the finite-horizon problem with time-varying parameters is equivalent to a shortest path problem and hence can be solved very efficiently, and give a very simple and fast algorithm for the infinite-horizon problem with time-invariant parameters. For the general finite-horizon problem without any assumption on the problem parameters, we formulate it as a zero-one integer program and propose an algorithm for solving it exactly based on Benders' decomposition. Computational results show that this solution algorithm is efficient, i.e., it is capable of solving large scale problems within a reasonable cpu time, and robust, i.e., the number of iterations needed to solve a problem does not increase quickly with the problem size. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 279–295, 1998     

Attrition models of the Ardennes campaign

This paper revisits the modeling by Bracken [3] of the Ardennes campaign of World War II using the Lanchester equations. It revises and extends that analysis in a number of ways: (1) It more accurately fits the model parameters using linear regression; (2) it considers the data from the entire campaign; and (3) it adds in air sortie data. In contrast to previous results, it concludes by showing that neither the Lanchester linear or Lanchester square laws fit the data. A new form of the Lanchester equations emerges with a physical interpretation. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 1–22, 1998     

平台式惯导系统初始对准最佳可观性分析

首先应用线性系统的奇异值分解理论对静基座初始对准的可观性及可观度进行了深入地分析.给出了不同奇异值下系统状态可观性状况的直方图,并且计算出不同状态组合时系统奇异值的大小及对可观性的影响.理论分析表明选取(△)N、(△)E、εE为不可观测时,系统的估计效果最好.其次采用卡尔曼滤波器对可观阵的秩为7的三种状态组合进行最优估计,仿真结果验证这种论断的正确性.最后从误差分析的角度阐述了这种论断的合理性.     

Decomposition-based approximation algorithms for the one-warehouse multi-retailer problem with concave batch order costs

We study the one-warehouse multi-retailer problem under deterministic dynamic demand and concave batch order costs, where order batches have an identical capacity and the order cost function for each facility is concave within the batch. Under appropriate assumptions on holding cost structure, we obtain lower bounds via a decomposition that splits the two-echelon problem into single-facility subproblems, then propose approximation algorithms by judiciously recombining the subproblem solutions. For piecewise linear concave batch order costs with a constant number of slopes we obtain a constant-factor approximation, while for general concave batch costs we propose an approximation within a logarithmic factor of optimality. We also extend some results to subadditive order and/or holding costs.     

Numerical simulation of the blast wave of a multilayer composite charge

The numerical simulation of a blast wave of a multilayer composite charge is investigated. A calculation model of the near-field explosion and far-field propagation of the shock wave of a composite charge is established using the AUTODYN finite element program. Results of the near-field and far-field calculations of the shock wave respectively converge at cell sizes of 0.25–0.5 cm and 1–3 cm. The Euler––flux-corrected transport solver is found to be suitable for the far-field calculation after mapping. A numerical simulation is conducted to study the formation, propagation, and interaction of the shock wave of the composite charge for different initiation modes. It is found that the initiation mode obviously affects the shock-wave waveform and pressure distribution of the composite charge. Additionally, it is found that the area of the overpressure distribution is greatest for internal and external simultaneous initiation, and the peak pressure of the shock wave exponentially decays, fitting the calculation formula of the peak overpressure attenuation under different initiation modes, which is obtained and verified by experiment. The difference between numerical and experimental results is less than 10%, and the peak overpressure of both internal and external initiation is 56.12% higher than that of central single-point initiation.     

耦合封闭声腔的主导声辐射模态确定方法

将在某一频率下或某一频段内对封闭声腔声势能起主要作用的一阶或几阶声辐射模态定义为耦合封闭声腔的主导声辐射模态。准确认定主导声辐射模态至关重要,直接影响有源控制效果。然而,现有的主导声辐射模态确定方法,要么仅考虑辐射效率的作用而忽视模态幅度的影响,要么就需要用到结构模态信息,难以实现工程应用。基于此,综合运用计算和测试手段,全面考虑辐射效率和模态幅度两个因素,提出了一种基于“初选—预留—后验”的主导声辐射模态确定方法,并通过实验研究证明了该方法的有效性和可行性。结果表明：提出的确定方法能够准确认定主导声辐射模态,确定过程中不需要用到辐射体的结构模态信息,可用于指导控制目标选取或重构封闭声腔声势能。     

伺服电机积分型SMC速度控制策略

为解决伺服电机控制系统输出转速可控性差、波动大、动态响应慢等问题,提出积分型滑模变结构控制策略,设计负载转矩观测器解决控制过程中的负载扰动问题,基于Simulink搭建永磁同步电机速度控制系统仿真模型,搭建电机测试系统台架对控制系统的稳态性能和动态性能进行试验验证。研究结果表明,相比于传统比例积分微分控制和普通滑模变结构控制(Sliding Mode variable structure Control, SMC),所设计的控制策略能够使控制系统达到稳态时速度波动较小,鲁棒性较好,抑制了SMC的抖振现象。