高空平台通信系统中多波束天线辐射特性对系统性能的影响

高空平台通信系统中将采用多波束天线提供蜂窝覆盖,来提高系统容量。本文分析等波束宽度和等波束面积两种类型多波束天线辐射特性以及它们的几何模型,推导了载干比计算公式,通过仿真分析不同参数配置条件下多波束天线辐射特性对系统载干比性能的影响。研究表明等波束面积多波束天线比等波束宽度多波束天线具有更好的载干比分布特性。本文得出的结论对HAP通信系统规划具有重要的指导意义。     

基于小波变换与SVM的复杂装备故障诊断研究

针对复杂装备故障信号提取困难、故障诊断精度低的现状,根据小波变换对处理非平稳信号的优越性和支持向量机(SVM)对模式分类的良好性能,提出了一种基于小波变换与SVM的故障诊断模型,并选取配电系统进行故障诊断仿真实验。结果表明该模型能利用少量训练样本完成故障诊断,有效提高装备故障诊断精度。     

基于能力映射的体系网络化建模与分析

从体系所具有的能力出发,准确地描述体系中实体之间的关系,建立体系结构模型是体系设计与分析的基础,也是基于能力的体系规划的关键。首先提出了能力到组分系统的映射规则,然后将所构建的体系二分网络转化为组分系统的加权合作网络,有效描述了体系组分系统间的复杂关系。最后给出了体系组分系统关系价值度量指标,并对网络模型进行社团结构分析,为基于能力的体系规划作了有益尝试。     

雷诺应力模型的初步应用

针对SSG/LRR-ω雷诺应力模型,选取NASA湍流资源网站上的四个典型算例,即湍流平板边界层流动、带凸起管道流动、翼型尾迹区流动和NACA0012不同攻角绕流,开展初步的验证与确认工作,将部分结果和CFL3D进行对比。对于NACA0012翼型绕流,对比雷诺应力模型和SA模型的升力系数,结果表明:在失速攻角附近,雷诺应力模型明显优于SA模型。在此基础上,将该模型应用于DLR-F6翼身组合体的数值模拟,计算得到的机翼表面典型站位压力分布和实验值吻合良好,同时该模型捕捉到翼身交汇位置的小范围分离。     

炮兵对有生力量压制比的仿真计算方法

为了评估炮兵对有生力量压制效果,应用离散事件仿真方法建立了炮兵射击有生力量仿真模型,提出一种炮兵对有生力量压制比的仿真计算方法。首先,给出了压制比的概念与模型。然后,建立了基于离散事件仿真的炮兵射击有生力量模型。最后,结合实例验证了仿真计算方法的正确性。     

变极性等离子弧焊换向过程控制方法研究

通过试验证实了变极性等离子弧焊换向过程中存在电弧电流谐振现象,且不同极性的电流谐振峰值不同,依据电弧理论分析发现换向期间等效电弧电阻是一个时变量。对换向电路建模分析和仿真结果表明,在换向期间系统阻尼比为时变量,调整系统阻尼比是降低电流谐振峰值的有效途径。又根据变结构控制思想提出了新的换向控制方法,并重新设计了换向电路,显著降低了电流谐振峰值,改善了大电流焊接时换向器件的工作状态,为大功率变极性等离子弧焊电源的研制和开发提供了依据。     

On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Factors that affect the optimal amount of central control in complex systems

Whereas much of the previous research in complex systems has focused on emergent properties resulting from self‐organization of the individual agents that make up the system, this article studies one vital role of central organization. In particular, four factors are conjectured to be key in determining the optimal amount of central control. To validate this hypothesis, these factors are represented as controllable parameters in a mathematical model. For different combinations of parameter values, the optimal amount of central control is found, either analytically or by computer simulation. The model is shown to provide results that match well with the level of control found across a broad spectrum of specific complex systems. This model also provides general guidelines as to how combinations of these factors affect the desirable level of control and specific guidelines for selecting and evaluating leaders. These results indicate that all of these factors, though not exhaustive, should be considered carefully when attempting to determine the amount of control that is best for a system. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于VFGPIR联合特征的决策级加权融合检测方法

车载前视地表成像雷达(VFGPIR)探测浅埋目标时面临虚警率过高问题,可利用序列图像特征的联合检测解决这一问题.首先利用Fisher鉴别比(FDR)定量评估从单帧和序列图像中提取的单个特征的鉴别能力;然后针对单个最优序列特征无法满足探测指标要求提出一种基于决策级加权融合的多特征联合检测方法;最后利用接收机工作特性(ROC)曲线来验证所提方法的有效性.试验结果表明:序列特征比单帧图像特征具有更好的鉴别能力;所提方法性能优于单个最优序列特征、特征向量和多数票融合准则对应的检测结果,有望满足实际探雷应用需求.     

四元数长方矩阵的同时复对角化

利用四元数矩阵的奇异值分解(SVD),对两个四元数长矩阵给出了其同时复对角化的充要条件,进一步对一个四元数长矩阵集合,针对其同时复对角化问题,给出了一系列充分必要条件.