基于主动相位控制的脉冲激光相干合成技术

提出并验证了基于随机并行梯度下降(SPGD)算法的主动相位控制脉冲激光相干合成方案.利用低通滤波器滤除脉冲激光光强变化导致的性能评价函数起伏,提取出相位噪声导致的性能评价函数变化,然后将这个低通滤波后的性能评价函数用于SPGD算法的极值寻优过程,从而实现脉冲激光的锁相.对该方案进行了理论分析和数值模拟,并进行了两路脉冲激光相干合成实验.实验结果表明,当系统从闭环到开环时,系统性能评价函数均值提高到开环的1.6倍,干涉条纹长曝光对比度从0提高到0.43.在该方案中,通过增加合成脉冲激光路数,并在各路脉冲激光中引入多级功率放大器,能够得到更高的合成功率输出.     

基于Bell态与Two-qutrit态无信息泄漏的量子对话协议

基于Einistein-Podolsky-Rosen纠缠对与量子安全直接通信(QSDC),提出了一个新的基于Bell态的量子对话协议.通信双方Alice和Bob只需要进行一次通信即可实现双方之间秘密的同时交换.该方案利用一个随机比特串和检测光子来实现安全性,能够抵抗截获/重放攻击、特洛伊木马攻击和纠缠攻击等典型攻击.很多近期提出的协议中存在严重的信息泄漏,也就是说任何窃听者都可以从合法通信者的公开声明中提取到部分秘密信息,我们的方案很好地克服了这一问题.协议的效率较高,可以达到66.7％,同时由于纠缠态粒子只需要进行一次传输,该方案更简单易行.将该协议推广到two-qutrit态,其安全性仍能得到保证.     

光纤激光水听器的PGC实时全数字解调系统

概述了基于麦克尔逊干涉仪的光纤激光水听器的相位载波零差法(PGC)调制解调原理,通过数学推导及仿真,分析了调制信号和混频信号的频差是导致全数字化解调结果错误的主要因素之一。针对该诱导因素提供了可行的解决方案,并实现了基于DSP的1 MHz采样频率下使用PGC方法的全数字实时解调系统。对低频水声波段800Hz水声信号进行解调,实验结果表明:解调信号波形良好。     

球磨时间对纳米SiO_2/Cu复合材料摩擦学性能的影响

采用球磨法与热压烧结工艺制备了添加w（n-SiO2）=1.0%的铜基纳米复合材料。通过球盘式摩擦磨损试验机测试了复合材料的摩擦磨损性能,采用排水法和场发射扫描电镜（FSEM）研究了复合材料的致密度、显微组织和磨损形貌。结果表明：球磨可提高复合材料的致密度,改善n-SiO2在铜基体中的分散均匀性;随球磨时间的增加,复合材料的动摩擦因数和磨损量先减小后增加,球磨10 h复合材料具有较低的摩擦因数和磨损量,磨损机理主要为磨料磨损。     

陶瓷基复合装甲防12.7mm穿甲燃烧弹的靶试研究（Ⅱ）

基于对材料特性和防弹机理的认识,设计了由（SiC＋Si）陶瓷、616装甲钢和高强PE材料构成的陶瓷基复合靶板,靶板防护面密度为118 kg/m2,尺寸为500 mm×500 mm×25 mm。利用现役12.7 mm穿甲燃烧弹考核靶板在6发弹打击下的防护能力,检验靶板设计思路。结果表明：靶板结构是可行的,可防住V25为818 m/s的现役12.7 mm穿甲燃烧弹。     

战术移动Ad Hoc网络下的分布式位置辅助功率控制算法

针对战术移动自组(AdHoc)网络提出一种分布式位置辅助的功率控制算法(LAPCA),它通过位置预测来推算节点的邻节点数目,进而调整信号发射功率,以保持最佳的网络连通性,由此提高整个网络的有效流量。该算法作为一个独立模块可以方便地与已有的移动自组网络路由协议相结合。采用较为适合战术环境的参考点群组移动(RPGM)模型来产生网络仿真场景,从仿真实验结果来看,几乎在所有的RPGM场景下采用该算法后的网络有效流量相对于纯粹的AODV路由协议都得到了提高。     

直升机工作特性建模与飞行性能仿真

以涡轮轴发动机工作特性建模为中心,对某系列直升机飞行性能进行仿真研究,力争实现对直升机实施"基于状态的维修"。讨论了直升机飞行性能和涡轮轴发动机特性的表述方法,建立了涡轮轴发动机的数学模型,并讨论了其解法与应用。基于发动机台架性能仿真程序对该模型进行简化,得到涡轮轴发动机工作过程的热力学模型。对发动机性能进行计算完成飞行性能仿真,应用结果表明该方法是可信、高效的。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Numerical investigation on cooling performance of filter in a pyrotechnic gas generator

As a key part of the pyrotechnic gas generator,the filter not only removes the particulate matter but also cools the hot gas to a safe level.This paper aims to improve the understanding of the basic heat and flow phenomenon in the gas generator.The pyrotechnic gas generator is modelling by a simplified filter structure with fiber arrays.A finite-volume model of the heat and fluid flow is proposed to simulate the detailed multi-dimensional flow and energy conversion behaviors.Several verification results are in good agreement with data in different references.Simulation results demonstrate that the filter can not only absorb heat from the gas but also cause the high intensity enhancement of the heat transfer.The per-formance difference between inline and staggered arrays is also discussed.The findings of the study put a further prediction tool for the understanding and design of the filter system with fibers.     

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with gra-phene platelets are studied in this paper. The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak's foundation. Sinusoidal shear deformation theory is used to describe displacementfield. Four different distribution patterns are employed in our analysis. The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters. The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers, weight fraction and two parameters of Pasternak's foundation.