复合材料偏心加筋壳特性分析

用任意加筋壳单元研究了复合材料偏心加筋壳结构的特性.研究表明,在结构几何尺寸已经确定的情况下,可以调整加强肋骨的偏心量,以改变加筋壳结构内部的受力和变形;调整加强肋骨的布置方式也是改变加筋壳结构强度和刚度的有效方法.     

激光成像雷达空间目标探测与识别技术

研究了激光三维成像雷达在动能拦截器空间目标探测与识别方面的应用。首先介绍了激光3D成像雷达系统基本原理,然后设计了激光3D成像雷达目标识别的工作流程,最后提出了基于旋转图像转换的3D目标识别算法。进一步探索了红外+LADAR主被动复合光学成像导引头在空天防御拦截武器目标探测与识别的应用,分析了复合光学导引头的关键技术,给出了相应的成像结果。     

大温差条件下碳纤维混凝土无约束变形试验

为了研究碳纤维、聚酯纤维对混凝土在自由条件下的约束作用,通过设计对碳纤维混凝土、聚酯纤维混凝土和素混凝土加热放热试验,比较掺入不同纤维体积分数的纤维混凝土在大温差条件下无约束自由变形的差异,并用温度线膨胀系数表达。对试验数据进行分析,得到体积分数为1%的碳纤维混凝土比素混凝土抗自由变形能力提高了38.8%,在本试验的各种体积分数中效果最好。结果表明碳纤维与混凝土,虽然热力学性能不同,但是二者结合之后碳纤维因其高弹性模量的特性,反而可以更好地抑制混凝土自由变形。试验效果也表明,随着施工工艺的完善,碳纤维体积分数可能会超过1%,碳纤维对混凝土性能的提升仍然有很大的帮助。     

Partial equilibrium in risk‐based production decisions

Characteristically, a small subset of operational problems admit risk neutrality when contingent claims methodology were used in their analysis. That is, for the majority of manufacturing and production problems, operating cash flows are not directly linked to prices of traded assets. However, to the extent that correlations can be estimated, the methodology's applicability to a broader set of operational problems is supported. Our article addresses this issue with the objective of extending the use of contingent claims techniques to a larger set of operational problems. In broad terms, this objective entails a partial equilibrium approach to the problem of valuing uncertain cash flows. To this end, we assume risk aversion and cast our approach within Merton's intertemporal capital asset pricing model. In this context, we formulate a “generic” production valuation model that is framed as an exercise in stochastic optimal control. The model is versatile in its characterization and can easily be adapted to accommodate a wide‐ranging set of risk‐based operational problems where the underlying sources of uncertainty are not traded. To obtain results, the model is recast as a stochastic dynamic program to be solved numerically. The article addresses a number of fundamental issues in the analysis risk based decision problems in operations. First, in the approach provided, decisions are analyzed under a properly defined risk structure. Second, the process of analysis leads to suitably adjusted probability distributions through which, appropriately discounted expectations are derived. Third, through consolidating existing concepts into a standard and adaptable framework, we extend the applicability of contingent claims methodology to a broader set of operational problems. The approach is advantageous as it obviates the need for exogenously specifying utility functions or discount rates.© 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

列车用复合材料阻燃性能研究

不同类别的阻燃剂配合使用能产生协效作用,大大提高阻燃效果。在甲基丙烯酸类不饱和聚酯树脂9001基体中,添加微囊化红磷/氢氧化铝/三氧化二锑/甲基膦酸二甲酯(MRP/Al(OH)3/Sb2O3/DMMP)阻燃剂体系,对其树脂体系固化物及玻璃纤维织物复合材料的力学性能和阻燃性能进行了实验研究,提出了一种有望用于列车复合材料大尺寸构件制造的性能优异、价格低廉的新体系。结果表明,当质量添加比例分别为12%MRP、50%Al(OH)3、2%Sb2O3时,树脂体系室温粘度100mPa.s左右,凝胶时间超过80min,适用于RTM和VIMP等大尺寸构件成型工艺;复合材料拉伸强度215.4MPa,弯曲强度177.15MPa,拉伸模量13.85GPa,弯曲模量13.36GPa,氧指数39.7。     

组网雷达的改进粒子滤波算法

针对现代战争中有源雷达容易受到干扰和反辐射导弹的摧毁,以及无源雷达隐蔽性高,只能测量方位角度,测量精度小等特点,提出利用集中式有源雷达系统与无源雷达系统协同组网对目标进行跟踪。但是在实际环境中,噪声属性以及有源雷达,无源雷达接收信号的特点决定了组网雷达需要应用非线性滤波技术对信号进行处理。传统的非线性技术包括卡尔曼滤波、扩展卡尔曼滤波(EKF)或无迹卡尔曼滤波(UKF)等方法。非线性近似过程带来的误差相对较大,而且均要求观测噪声和过程噪声为独立或相关的高斯白噪声。而粒子滤波避免了传统非线性滤波方法的缺陷,但是存在粒子退化,于是用EKF和UKF在每一时刻更新粒子,用更新的粒子及其协方差构造重要性函数,然后重采样。仿真实验表明这两种改进粒子滤波方法有很好的效果。     

复杂系统可靠度的CLTM建模与递归综合算法

针对大型复杂系统可靠度模型及其综合计算的特点,提出了一种一体化建模方法———"复合逻辑树模型"(CompositeLogicTreeModel,简称CLTM),阐述了其基本思想和原则,给出了相应的可靠度递归调度算法,并设计实现了基于CLTM的可视化建模与综合计算软件。该方法与软件已成功应用于某大型航天系统分析任务。     

Insurgency by the numbers I: A reconsideration of the ecology of communist success in jiangxi province,China

Theorizing about Taliban operations in Afghanistan has its limits and it is possible that Kabul-centric strategies do not adequately address the unique circumstances of each region in the country. How exactly has the Taliban gone about attaining its objectives in Kandahar province and how have those approaches evolved since 2002? And how have the Taliban adapted to coalition forces' attempts to compete with the insurgency and stamp it out? The answers to these questions are critical in the formulation of any counterinsurgency approach to Afghanistan.