一种新的足球视频语义镜头表示及事件查询框架

提出了一个足球视频中的语义镜头表示及事件查询框架.在这个框架中,定义了不同的语义镜头,并且每类语义镜头都可以由五个特征属性所刻画.在语义镜头定义的基础上,为了弥补传统的事件查询方式的不足,提出了一种用户定义事件的查询方式,它是一种基于语义镜头合成Petri网表示模型的查询方式,可以由用户自由定义所感兴趣的事件Petri网表示结构,实验证明该查询方式能有效提高查询效率,并有很大的灵活性,能适应不同广播公司的转播规则,但该查询方式需要用户具有一定的专业和领域知识.实验数据来源于2006年德国世界杯、英格兰足球超级联赛和西班牙足球甲级联赛.     

B4C／Al复合板中应力波行为分析（Ⅱ）

在已建立的应力波传播模型和研究弹、板间作用力所获结果的基础上,为分析复合板应力的变化,对复合板弹板碰撞承受的应力进行了简化处理,根据应力波传播特性,确定了复合板内能量集中区域,研究了应力波在复合板巾的传播和能耗,并讨论了应力波对陶瓷的作用。通过近似计算,发现烧蚀消耗的弹丸动能较大,在复合板中,Al板的塑性变形吸收了19％的弹丸动能。     

不同截面形状复合长杆弹对陶瓷复合靶板侵彻研究

采用数值模拟技术研究了由3种不同截面形状的钨芯外包覆一层钢,形成的钢包覆层复合长杆弹在入射速度为1200m/s～1700m/s时对陶瓷/金属复合靶板的侵彻过程。结果表明:对于同一入射速度、相同弹体长度、同种材料的弹芯和包覆层以及靶板材料而言,等面积的六边形截面钨芯复合长杆弹的侵彻深度明显大于圆形及方形截面,方形及六边形截面与和它们等外接圆形成的圆形截面复合长杆弹侵彻深度没有明显差别,本研究认为这是与不同截面钨芯的外接圆直径直接相关。六边形截面长杆弹侵彻过程中的自锐化现象是其侵彻深度明显大于其它两种弹体的主要原因。     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

Effects of jute fibre content on the mechanical and dynamic mechanical properties of the composites in structural applications

Due to notable characteristics, sustainability concept and environmental issues, hybridisation natural with synthetic fibres to fabricate composites have been rapidly gaining market share in different applications (structural, military, aerospace and automotive vehicles). Compression, tension and fatigue tests of various stacking sequences of plain jute/carbon reinforced (PVB) polyvinyl butyral by hot hydraulic press technique were experimentally conducted. Six types of fabricated composites with various constituents (jute, carbon and their hybrids) were fabricated and tested. Notably, fatigue lifetime of hybrids increases with increasing the carbon content relative to the jute fibre content. On the other hand, Jute composites possess high strain compared to pure carbon composite, which gives an overall improvement in mechanical behaviours. Interestingly, H1 hybrid with Carbon/Jute/Carbon sequences offers similar fatigue stiffness behaviour of H3 hybrid with Carbon/Jute/Carbon/Jute sequences when subjected to cyclic loading. Carbon composite (C) exhibited the highest fatigue resistance, whiles jute composite (J) possessed the highest strain and semi brittle trends in both mechanical and fatigue performance. Results concluded that plain jute fibres could partially replace high-cost synthetic carbon fibres to produce more eco-friendly hybrids to be utilised in different composites industries.     

纤维织物复合材料组分材料体分比的显微CT实验测定法

针对纤维织物复合材料的组分材料体分比测定问题,提出一种基于显微CT图像的测定方法。该方法可以通过不同尺度的显微CT图像分别测定全局纤维体分比、局部纤维体分比和纤维束体分比参数,还可以为难以用常规物理实验测定体分比的复合材料组分材料体积分数测定提供解决方案。以E-Glass/Epoxy纤维织物复合材料为研究对象,对比ASTM D3171 Procedure G、扫描电镜实验和显微CT实验三种测定法的测量值,结果证明了显微CT实验测定法的可行性和合理性。针对扫描电镜图像和显微CT图像,分别给出了相应的图像处理方法,为获得正确的组分材料分割结果提供了技术保证。显微CT实验测定方法可以广泛应用于复合材料组分材料体分比的测定。     

复杂系统可靠度的CLTM建模与递归综合算法

针对大型复杂系统可靠度模型及其综合计算的特点,提出了一种一体化建模方法———"复合逻辑树模型"(CompositeLogicTreeModel,简称CLTM),阐述了其基本思想和原则,给出了相应的可靠度递归调度算法,并设计实现了基于CLTM的可视化建模与综合计算软件。该方法与软件已成功应用于某大型航天系统分析任务。     

zn及Zn／Si02复合添加剂的摩擦学性能

实验室自制了锂基润滑脂,通过四球试验研究zn作为锂基润滑脂添加剂在不同工况条件的摩擦学性能,利用光学显微镜和EDX分析了磨斑表面形貌及元素组成,探讨了zn的润滑作用机理,并对zn与SiO2不同复配方案的摩擦学性能进行了研究。结果表明：在低载荷条件,zn能更显著地提高锂基润滑脂的抗磨性能;在中高载荷条件,zn同时具有减摩抗磨性能,但对Pn值的提高没有太大帮助。EDX能谱分析表明磨斑表面存在特征zn元素,说明zn能够在摩擦表面沉积,形成摩擦学性能显著的表面润滑层;同时,zn与硬质颗粒SiO2在适宜的复配比例时具有一定的协同效应,能提高锂基润滑脂的摩擦学性能．     

Cu/C复合型润滑添加剂减摩抗磨性能研究

将纳米Cu和纳米金刚石复配成Cu/C复合添加剂,对其在500SN基础油中的减摩抗磨性能进行了研究.结果表明,加入了Cu/C复合添加剂的试油能明显改善500SN基础油的摩擦学性能:当纳米Cu添加量为4%,纳米C添加量为2%时,加入了Cu/C复合添加剂的试油减摩性能最好,同500SN空白试油相比,摩擦因数可降低94.8%;...     

纳米颗粒和非晶相复合刷镀层n-Al2O3／Ni-P的制备

采用纳米电刷镀技术在钢基体表面制备了n-Al2O3/Ni-P复合刷镀层,研究了复合刷镀液中纳米颗粒含量、刷镀电压和刷镀笔移动速度对复合刷镀层中P和Al2O3含量的影响.优化后的工艺参数范围为刷镀液中n-Al2O3颗粒含量20～30 g/L、刷镀电压8～12 V、刷镀笔移动速度5～10 m/min.制备的n-Al2O3/Ni-P复合刷镀层组织致密,含有纳米颗粒和非晶相.