含有p-Laplacian算子的非齐次边值问题正解的存在性

研究非齐次边界条件下,含有p-Laplacian算子的微分方程的可解性,在Banach空间中应用Krasnoselskii不动点定理,得到了边值问题正解存在性结果。     

光顺样条函数的再生核表示与计算

光顺样条是散乱数据拟合的理想函数,是噪声数据最优平滑的重要工具。因此,光顺样条的数学表示和计算的研究具有重要的意义。本文在一般的线性微分算子和线性泛函的情况下讨论光顺样条函数的构造和计算,通过构造一个适当的再生核Hilbert空间,使得所讨论的微分算子光顺样条成为该空间中的最小范数问题,再利用投影理论建立了光顺样条函数的再生核表示方法,并得到了插值偏差表达式。作为特例,还给出了奇次多项式光顺样条函数新的简洁的计算方法。     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

二维时变电磁场第一边值初值问题广义解的存在与唯一性

在频率为１０１０以下的情况下,给出了由正弦交变电流引起的二维时变电磁场所对应的偏微分方程,并用非线性算子半群理论及单调算子理论证明了相应偏微分方程第一边值初值问题广义解的存在与唯一性．     

关于强增生算子的Mann迭代序列收敛的充要条件

设Z是一致光滑Banach空间,T：X→X是次连续强增生算子,｛an｝、｛βn｝是两个实数列且满足0≤an≤1,及an→0（n→∞）,令Mann迭代序列｛Xn｝定义为证明了迭代序列｛xn｝强收敛于S的不动点q的充要条件是｜｜Txn｜｜有界。     

含非线性半群的微分包含

研究了形如X＇（t）∈-Ax（t）＋F（t,x（t））,0≤t≤T,X（0）＝x0的微分包含解的存在的局部性和整体性的结果,并在某种条件下研究了解的稳定性。     

带紧扰动的m-增生算子的满值性定理

引入“DC”空间的概念,研究了带紧扰动的m－增生算子的满值性问题,改进了Kartsatos、Deimling、周海云以及徐宗本等人的结果。     

严格集压缩场的拓扑度计算

给出了严格集压缩场的拓扑度在非球域上的度为零的结果,改进了孙经先1987年相应的结果。     

Parallel machine scheduling with eligibility constraints: A composite dispatching rule to minimize total weighted tardiness

We study a parallel machine scheduling problem, where a job j can only be processed on a specific subset of machines M_j, and the M_j subsets of the n jobs are nested. We develop a two‐phase heuristic for minimizing the total weighted tardiness subject to the machine eligibility constraints. In the first phase, we compute the factors and statistics that characterize a problem instance. In the second phase, we propose a new composite dispatching rule, the Apparent Tardiness Cost with Flexibility considerations (ATCF) rule, which is governed by several scaling parameters of which the values are determined by the factors obtained in the first phase. The ATCF rule is a generalization of the well‐known ATC rule which is very widely used in practice. We further discuss how to improve the dispatching rule using some simple but powerful properties without requiring additional computation time, and the improvement is quite satisfactory. We apply the Sequential Uniform Design Method to design our experiments and conduct an extensive computational study, and we perform tests on the performance of the ATCF rule using a real data set from a large hospital in China. We further compare its performance with that of the classical ATC rule. We also compare the schedules improved by the ATCF rule with what we believe are Near Optimal schedules generated by a general search procedure. The computational results show that especially with a low due date tightness, the ATCF rule performs significantly better than the well‐known ATC rule generating much improved schedules that are close to the Near Optimal schedules. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 249–267, 2017     

TiO_2/ACF复合光催化材料的制备及性能

用适宜载体将粉体材料固定是提高光催化材料稳定性的关键。采用溶胶-凝胶法,以钛酸丁酯为原料,选取活性炭纤维(ACF)为载体,制备了TiO2/ACF复合光催化材料。利用X射线衍射仪(XRD)、热分析仪(DSC-TG)和扫描电子显微镜(SEM)等测试技术对复合光催化材料的结构进行了表征分析。在紫外光照射下,通过对甲醛气体的光催化降解,考察了煅烧温度、煅烧时间、负载次数和负载时间等不同制备条件对复合光催化材料结构和性能的影响,结果表明:当煅烧温度为400℃,煅烧时间为2h,负载3次,负载时间为6min制备的TiO2/ACF光催化性能最佳。