船舶结构力学的新近进展

本文基于国际船舶与离岸结构会议第11届大会的技术报告,论述船舶结构力学的新近进展。文中介绍了船舶结构力学的研究范围不断扩大,结构设计目标多元化,可靠性分析方法的建立和应用,数值计算方法的广泛采用,非线性分析的深入,水弹性力学受到重视,复合材料的应用,材料和工艺因素对船舶结构的影响等方面的进展。     

船舶结构可靠性研究现状

从载荷、承载能力和可靠性分析方法3个方面综述了船舶结构可靠性研究的发展状况,并对今后的研究方向提出了建议.     

THE CREEP-DAMAGE MODELING CORRELATED TO TEMPERATURE FOR COMPOSITE SOLID PROPELLANT

ＴＨＥＣＲＥＥＰ－ＤＡＭＡＧＥＭＯＤＥＬＩＮＧＣＯＲＲＥＬＡＴＥＤＴＯＴＥＭＰＥＲＡＴＵＲＥＦＯＲＣＯＭＰＯＳＩＴＥＳＯＬＩＤＰＲＯＰＥＬＬＡＮＴＳｈｅｎＨｕａｉｒｏｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＡｅｒｏｓｐａｃｅＴｅｃｈｎｏｌｏｇｙ,１０８Ｌａｂｏ...     

多自由度系统及结构非线性自由振动的摄动谐波平衡法

本文在谐波平衡法的基础上,引入摄动的思想,得出了解多自由度系统及结构的非线性自由振动的新方法。其解的形式为小参数和谐波的级数形式,因此,其解不会遗漏任何项,方程为线性的代数方程;利用线性变换,将系数矩阵变换为对角阵,一旦求出线性模态,就可得其解,比线性化迭代法优越得多。算例表明,本文方法对于小振幅有较高的精度,对于较大振幅其结果也是令人满意的。     

聚碳硅烷先驱体制备SiC基复合材料的性能研究

本文以聚碳硅烷(PCS)为先驱体,SiC晶须,SiC微粉或C纤维为增强剂,热解转化制得SiC/SiC或C/SiC复合材料,研究其制备工艺过程对材料的力学和热物理性能的影响。结果表明:PCS在1300℃下转化为β-SiC微晶并将未烧结的增强剂网络在一起形成SiC/SiC或C/SiC复合材料。该SiC基复合材料具有较好的常温和高温机械强度,优异的耐热疲劳和抗热震性能,在1300℃空气中具有良好的抗氧化性。     

复合材料圆锥壳稳定性分析的传递函数法

基于线弹性小变形理论， 利用Ｆｏｕｒｉｅｒ级数展开、Ｌａｐｌａｃｅ 变换和摄动方法， 建立了复合材料薄壁圆锥壳的静力响应、频率响应、自由振动与屈曲特征值问题的渐近传递函数解。构造了复杂边界条件、中间带支撑、变锥度及阶梯变厚度圆锥壳的传递函数解。数值计算结果表明该方法具有很高的计算精度。     

尾座式电动飞机复合材料机翼结构优化设计

以复杂地形地区物资快速投送平台设计为背景,开展尾座式电动飞机复合材料机翼设计研究。对机翼结构载荷进行分析,对机翼结构构件布置和铺层进行设计,形成复合材料机翼结构设计方案。建立复合材料机翼结构有限元模型,开展典型工况条件下的静力分析,得到机翼结构变形、应力和Tsai-Wu失效因子分布。采用分步优化策略,以机翼结构铺层厚度和铺层角度为设计变量,开展机翼结构质量优化计算,优化结果表明,优化后的机翼结构在满足强度和刚度要求下质量减轻约47.77%,可为尾座式电动飞机结构设计提供重要参考。     

分层土中桩筏基础荷载分担

结合一个桩筏联合基础的设计过程,探讨了在复杂地基土上基础设计中的受力分析及变形协调计算过程.介绍了在满足复合地基承载力和变形要求前提下合理布置桩筏联合基础的做法及其设计思路.布置桩筏联合基础时使桩筏分别落在不同土层上,以充分利用不同深度地基土的承载力;另外针对桩下为非淤泥系硬土层,应最大限度利用桩身强度和天然地基承载力.该做法可以取得很好的经济效益,可供工程设计人员参考.     

Parallel machine scheduling with eligibility constraints: A composite dispatching rule to minimize total weighted tardiness

We study a parallel machine scheduling problem, where a job j can only be processed on a specific subset of machines M_j, and the M_j subsets of the n jobs are nested. We develop a two‐phase heuristic for minimizing the total weighted tardiness subject to the machine eligibility constraints. In the first phase, we compute the factors and statistics that characterize a problem instance. In the second phase, we propose a new composite dispatching rule, the Apparent Tardiness Cost with Flexibility considerations (ATCF) rule, which is governed by several scaling parameters of which the values are determined by the factors obtained in the first phase. The ATCF rule is a generalization of the well‐known ATC rule which is very widely used in practice. We further discuss how to improve the dispatching rule using some simple but powerful properties without requiring additional computation time, and the improvement is quite satisfactory. We apply the Sequential Uniform Design Method to design our experiments and conduct an extensive computational study, and we perform tests on the performance of the ATCF rule using a real data set from a large hospital in China. We further compare its performance with that of the classical ATC rule. We also compare the schedules improved by the ATCF rule with what we believe are Near Optimal schedules generated by a general search procedure. The computational results show that especially with a low due date tightness, the ATCF rule performs significantly better than the well‐known ATC rule generating much improved schedules that are close to the Near Optimal schedules. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 249–267, 2017     

TiO_2/ACF复合光催化材料的制备及性能

用适宜载体将粉体材料固定是提高光催化材料稳定性的关键。采用溶胶-凝胶法,以钛酸丁酯为原料,选取活性炭纤维(ACF)为载体,制备了TiO2/ACF复合光催化材料。利用X射线衍射仪(XRD)、热分析仪(DSC-TG)和扫描电子显微镜(SEM)等测试技术对复合光催化材料的结构进行了表征分析。在紫外光照射下,通过对甲醛气体的光催化降解,考察了煅烧温度、煅烧时间、负载次数和负载时间等不同制备条件对复合光催化材料结构和性能的影响,结果表明:当煅烧温度为400℃,煅烧时间为2h,负载3次,负载时间为6min制备的TiO2/ACF光催化性能最佳。