面向网络延迟均衡性的片上网络交叉开关分配策略

针对路由器中的交叉开关分配,提出面向网络延迟均衡性的分配策略,旨在通过更加公平的交叉开关分配策略提升网络延迟均衡性,从而进一步提升系统性能。通过在全系统模拟器上运行SPEC CPU2006实验表明,与传统的分离式分配策略和最新的TS-Router分配策略相比,延迟标准差分别平均降低了13. 8%和3. 9%,而最大延迟分别平均降低了45. 6%和15. 1%。在系统性能方面,相比于TS-Router,所提分配策略在IPC上平均提升了0. 8%。在分离式分配器的基础上完成了硬件实现,并给出了速度、面积和功耗方面的开销评估。     

大肠杆菌转录起始位点的计算定位方法

根据已有的启动子识别算法,提出了一种基于滑动窗口的大肠杆菌转录起始位点(TSS)计算定位方法,通过在启动子信号特征中引入复合模式来改进识别分类器,并将其用于滑动窗口序列,在合理限定的TSS定位范围内依次计算各个序列位置的TSS似然得分,再利用TSS与翻译起始位点(TLS)的距离分布信息作为TSS的位置得分,两者相结合来进行位置预测。对大肠杆菌真实数据的测试表明,算法可以大幅度减少假阳性结果,实现对真实TSS位置的有效预测。     

NICALON SiC/Al 预制丝热膨胀特性研究

本文研究了NICALON SiC束丝纤维增强铝预制丝在15～400℃温度区间内的热膨胀特性。研究表明预制丝两次热循环后得到的膨胀曲线不一致,该曲线在15～400℃范围的平均热膨胀系数分别为3.2×10~(-6)℃~(-1)、4.1×10~(-6)℃~(-1)。本文对预制丝的热膨胀行为进行了理论分析和探讨,计算值和实验值较为符合。     

SiCf/Si-O-C复合材料的抗氧化、抗热震性能研究

通过研究材料的氧化前后质量的改变和强度减少及氧化前后微观结构的变化,研究了先驱体转化法制备的SiCf/Si-O-C复合材料的抗氧化、抗热震性能。结果表明SiCf/Si-O-C复合材料具有良好的抗氧化、抗热震性能。对所得材料微观结构进行了分析讨论,发现界面结构的变化是影响SiCf/Si-O-C复合材料抗氧化、抗热震性能的主要原因。     

地空导弹兵混编群作战仿真研究

应用离散事件动态系统仿真的基本理论,建立了地空导弹兵混编群作战过程仿真模型,并用Arena仿真平台实现了仿真。通过仿真实例,分析了不同空袭目标流密度和空袭目标采取低空突防时对目标突防概率的影响。仿真结果表明,在该实例中,增大空袭目标流密度对目标突防概率没有显著的影响,而采取低空突防对目标突防概率影响显著。最后,对仿真结果进行了分析,证明了仿真模型的有效性。     

Influence of high frequency pulse on electrode wear in micro-EDM

An electromagnetic coupling mathematical model is established by finite element method and is verified by the contrastive experiments of copper matrix Ni–TiN cylindrical coating electrode, copper electrode and Cu50W electrode. The wear mechanism of Ni–TiN/Cu composite electrode in the case of high-frequency pulse current is studied, and the influence of the fluctuation frequency of discharge current on electrode wear in micro-EDM is found out. Compared with the electrode made from homogeneous material, the high frequency electromagnetic properties of Ni–TiN composite layer can be used effectively to inhibit the effect of high frequency pulse on the electrode and improve the distribution trend of current density.     

新型军用模块化充电电源

为了弥补部队装备中充电设备技术落后、自动化水平低的缺点,介绍了利用高频开关管IGBT构成模块化充电电源的主电路、控制电路及保护电路的结构、原理。利用该项技术研制的移动式充电车与充电柜,极大地提高了部队的快速反应能力。     

Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.     

Fabrication and analysis of TIG welding-brazing butt joints of in-situ TiB2/7050 composite and TA2

Lightweight hybrid structures of Al MMCs and titanium alloy dissimilar materials have great prospect in the defence industry application. So, it is necessary to join Al MMCs with Ti metal to achieve this structural design. In this work, in-situ TiB2/7050 composite and TA2 were firstly attempted to join by TIG welding-brazing technique. The result was that the intact welding-brazing butt joint was successfully fabricated. The joint presents dual characteristics, being a brazing on TA2 side and a welding on TiB2/7050 side. At brazing joint side, ER4043 filler metal effectively wets on TA2 under TIG heating condition, and a continuous interfacial reaction layer with 1—3μm is formed at welded metal/TA2 interface. The whole interfacial reaction layers are composed of Ti(AlSi)3 intermetallic compounds (IMCs), but their morphologies at the different regions present obvious distinguishes. The microhardness of the reaction layers is as much as 141—190 HV. At welding joints side, the fusion zone appears the equixaed crystal structure, and the grain sizes are much smaller than those of welded metal, which is attributed to the effect of TiB2 particulates from the melted TiB2/7050 on acceleration formation and inhibiting growth for the new crystal nucleus. The tensile test results show that average tensile strength of the optimal welding-brazing joint is able to achieve 138 MPa. The failure of the tensile joint occurs by quasi-cleavage pattern, and the cracks initiate from the IMCs layer at the groove surface of TA2 and propagate into the welded metal.     

磁控溅射工艺对CrN基复合涂层微观结构及摩擦学性能的影响

采用闭合场非平衡磁控溅射技术在不锈钢基体上制备了不同质量分数Mo的CrMoN复合涂层。采用X射线衍射仪（XRD）、扫描电子显微镜（SEM）、能谱仪（EDX）和光电子能谱仪（XPS）,系统分析了CrMoN复合涂层的相结构、表面形貌、成分、原子化合价价态等,结果表明：添加Mo后,CrMoN涂层的择优取向由CrN涂层的（220）转变为（200）,CrMoN涂层中的Mo原子取代了CrN晶格中的Cr原子,形成（Cr,Mo）N置换固溶体。采用Nano Test 600硬度测试仪测定了CrMoN复合涂层的纳米硬度,结果表明：由于CrN相和MoN两种硬相的协同作用,使得CrMoN复合涂层的纳米硬度值增大。采用多功能摩擦磨损试验机测定了CrN涂层及CrMoN复合涂层的摩擦因数,结果表明：CrMoN复合涂层的摩擦因数低于CrN涂层,磨损过程中由于摩擦热反应生成大量MoO3,使得复合膜的摩擦因数降低,起到了一定的润滑效果,降低了磨损量。