Force chains based mesoscale simulation on the dynamic response of Al-PTFE granular composites

Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminum-polytetrafluoroethylene (Al-PTFE) granular composites under a low-velocity impact. A two-dimensional model followed the randomly normal distribution of real Al particles size is developed. The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments. The results indicate that, force chains behavior governed by the number and the size of agglomerated Al particles, significantly affects the impact response of the material. The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density. A high crack area of the material is critical mechanism to arouse the initiation re-action. The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance. In addition, simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials. It is found that smaller sized Al particle of com-posites are more preferred than its bulky material in ultimate strength. Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number. The simulation studies provide further insights into the plastic deformation, failure mechanism, and possible energy release capacity for Al-PTFE composites, which is helpful for further design and application of reactive materials.     

PIP工艺制备的C/SiC复合材料的氧化行为

PIP工艺制备的C/SiC复合材料中SiC基体富碳,因此增强体和基体均容易氧化。碳纤维和无涂层保护C/SiC复合材料试样在400~1300℃的氧化速率随温度升高而加快,低温为反应控制,高温为扩散控制。CVD-SiC涂层保护C/SiC复合材料和由CVD-SiC层、自愈合层、CVD-SiC层三层涂层保护C/SiC复合材料在400~1300℃的氧化先随温度升高而加快,然后减慢。三层涂层在800~1300℃有非常好的保护效果。扫描电镜照片显示自愈合层的玻璃态物质进入涂层裂纹中,填充裂纹且阻挡氧的通过,从而有良好的抗氧化保护效果。     

UHMWPE复合材料抗爆实验研究

运用定制的聚偏四氟乙烯(PVDF)压电传感器,直接测量爆炸载荷下UHMWPE层叠无纬布和PU基体的UHMWPE复合材料内部冲击波压力峰值,对其冲击波衰减特性进行了实验研究。实验结果表明:UHMWPE复合材料对爆炸冲击波有很好的衰减作用,含有PU基体的UHMWPE复合材料比UHMWPE层叠无纬布对爆炸冲击波有更好的衰减效果。UHMWPE复合材料具有轻质、吸收冲击波效率高等特性,在爆炸冲击波防护领域有很好的应用前景。     

RTM工艺整体成型复合材料连接裙轴压性能

整体成型的固体火箭发动机复合材料连接裙有助于连接裙的减重及其使用性能的提高。本文采用RTM工艺制备出了全复合材料整体连接裙并对其进行了轴压承载性能考核。试验结果表明,RTM工艺整体成型的复合材料连接裙质量均匀,在设计载荷作用下,连接裙的轴向应变远小于0.5%的复合材料许用应变指标,连接裙的轴向表观结构刚度为40.9GPa。     

添加SiC微粉对硅树脂先驱体转化3D Cf/Si-O-C材料性能的影响

以三维碳纤维织物和廉价的硅树脂为原料,采用先驱体转化工艺制备3D G/Si-O-C材料,考察了浸渍液中添加SiC填料对材料微观结构、力学性能和抗氧化性能影响.结果表明:添加适量的SiC填料有助于减少基体孔隙,改善界面结合,从而提高材料的力学性能;而SiC含量过高时,容易在材料内部形成闭孔,从而导致材料力学性能下降.当SiC微粉含量为18.2%时,材料具有最好的力学性能,弯曲强度和断裂韧度分别为421.3MPa和13.0 MPa·m1/2;而材料的抗氧化性能随着SiC微粉含量的增加而增加,当SiC微粉含量为25.0%时,材料的弯曲强度保留率最高,达到了89.5%.     

准陶瓷Cf/SiC复合材料的制备

采用热重-差热(TG-DTA)、红外(IR)等分析测试手段,研究了聚碳硅烷(PCS)的裂解及化学转化过程,从理论上验证了先驱体聚碳硅烷(PCS)600℃裂解产物的准陶瓷特性.先驱体聚碳硅烷在600℃呈现一种半有机、半无机状态,其产物具有准陶瓷的特征,在大约750℃出现无机化转变高峰,固称其为准陶瓷.以碳布、准三维编织体、三维编织体为增强体,采用先驱体浸渍裂解(PIP)工艺在600℃制备了碳纤维增强碳化硅(Cf/SiC)准陶瓷基复合材料.结果表明,以三维编织体增强的准陶瓷Cf/SiC复合材料获得了较理想的结构、性能,所制备3D-Cf/SiC复合材料密度仅有1.27g/cm3,弯曲强度达到193.69MPa,室温拉伸强度为197.69MPa,600℃拉伸强度为167.33MPa.复合材料断口形貌分析表明,在低温600℃制备的准陶瓷Cf/SiC复合材料呈现明显的韧性断裂特征.     

抗电磁干扰高分子材料的研究与应用

通过对电磁波干扰的现象分析,阐述了屏蔽作用原理及屏蔽方法,研究了表面导电材料和导电复合材料等抗电磁干扰高分子材料的性能、工艺及其屏蔽效果,并对它们的应用与发展前景进行了讨论。     

连续碳化硅纤维的研制

本文研究了用先驱体法制备连续碳化硅(SiC)纤维的全过程。通过常压高温裂解法制得纺丝性能好的聚碳硅烷,经100孔熔融纺丝、不熔化处理和高温烧成等一系列工艺处理,制得了高性能的SiC纤维。该纤维单丝直径8～15微米,连续长度达100米,抗拉强度为2～2.3GPa,抗拉模量178GPa。主要性能达到日本同类产品八十年代的水平。本文还对制备工艺的一些基本规律及连续纤维的主要性能进行了研究。     

Tuning the reactivity of Al–Ni by fine coating of halogen-containing energetic composites

In this paper, various core-shell structured Al–Ni@ECs composites have been prepared by a spray-drying technique. The involved ECs refer to the energetic composites (ECs) of ammonium perchlorate/nitrocellulose (AP/NC, NA) and polyvinylidene fluoride/hexanitrohexaazaisowurtzitane (PVDF/CL-20, PC). Two Al–Ni mixtures were prepared at atomic ratios of 1:1 and 1:3 and named as Al/Ni and Al/3Ni, respectively. The thermal reactivity and combustion behaviors of Al–Ni@ECs composites have been comprehensively investigated. Results showed that the reactivity and combustion performance of Al–Ni could be enhanced by introducing both NA and PC energetic composites. Among which the Al/Ni@NA composite exhibited higher reactivity and improved combustion performance. The measured flame propagation rate (v = 20.6 mm/s), average combustion wave temperature (T_max = 1567.0 °C) and maximum temperature rise rate (γ_t = 1633.6 °C/s) of Al/Ni@NA are higher than that of the Al/Ni (v = 15.8 mm/s, T_max = 858.0 °C, and γ_t = 143.5 °C/s). The enhancement in combustion properties could be due to presence of the acidic gaseous products from ECs, which could etch the Al₂O₃ shell on the surface of Al particles, and make the inner active Al to be easier transported, so that an intimate and faster intermetallic reaction between Al and Ni would be realized. Furthermore, the morphologies and chemical compositions of the condensed combustion products (CCPs) of Al–Ni@ECs composites were found to be different depending on the types of ECs. The compositions of CCPs are dominated with the Al–Ni intermetallics, combining with a trace amount of Al₅O₆N and Al₂O₃.     

C/SiC陶瓷基复合材料燃烧室壁厚设计与验证

C/SiC复合材料发动机具有重量轻、工作温度高等优势,已成为下一代高性能发动机的重要发展方向,其中C/SiC复合材料燃烧室的强度与壁厚设计是发动机设计的关键技术之一。本文以薄壳理论和第四强度理论为基础,以环向拉伸强度为基础数据,推导了C/SiC复合材料燃烧室壁厚计算公式,并对某型号发动机燃烧壁厚进行了计算。未验证计算结果准确性,利用复合材料燃烧室试件的爆破试验对计算结果进行了验证,并对根据计算结果研制的C/SiC复合材料燃烧室进行了热试车考核验证。本文提出的研究计算方法与结果对其他C/SiC复合材料燃烧室的壁厚设计具有指导意义。