面向癫痫脑电的简化深度学习模型

针对脑电信号随机性强、动态变化迅速等特点,提出了一种简化深度学习模型研究癫痫脑电识别问题。提出的模型以一维卷积神经网络为基础,在结构方面简化了卷积层、池化层等以提高模型效率,在整体框架方面应用了Keras框架,在训练优化算法方面采用RMSProp算法作为模型优化算法,通过预定义的目标函数来进行损失估计,模型设计上加入了批标准化层和全局均值池化层。基于所提模型,从三个方面研究了癫痫脑电识别问题,即:利用经验模态分解,分别选取前三阶、前五阶、前七阶、前八阶的本征模态函数分量,在简化模型上进行对比分析;利用提出模型所具备的深度学习特点,直接识别原始脑电信号而无须特征提取环节;增加了三种不同方法分别提取7类特征,对相同的脑电数据进行对比分析。性能分析结果表明:对于五类不同的脑电信号,前三阶的本征模态函数分量的识别率达到92.1%,比其他几种处理方式识别率高;前八阶的本征模态分量识别率不及原始信号,表明人工数据处理时会给数据带来噪声; 所提出的简化深度学习模型能高效处理癫痫脑电识别问题,具备较高效率和较好性能。     

顾及地磁影响的GNSS电离层层析不等像素间距算法

突破传统全球导航卫星系统(Global Navigation Satellite System, GNSS)层析反演研究忽略地球磁场对电离层变化活动的影响,同时顾及不同电离层高度电子密度变化较大的影响,提出在地磁坐标系下建立电离层高度方向上不等像素间距的GNSS层析反演方法。在此基础上,通过建立新的电离层层析迭代松弛因子,提高GNSS电离层电子密度层析反演结果精度。利用IRI—2007电离层模型、GNSS实测数据与电离层测高仪数据,从模拟验证和实测数据对比两方面,反演统计了不同层析算法估算的峰值电离层电子密度误差、电子密度剖面结果平均绝对百分比误差及均方根误差,验证了顾及地磁影响的GNSS电离层层析不等像素间距算法的有效性。     

美国陆军网络装备作战评估及启示

作战试验能有效地推动装备体系的建设发展,本文通过分析美国陆军网络集成评估与联合作战评估的作战试验特点,提出军队开展装备作战试验的几个建议。首先,总结了美国陆军网络集成评估到联合作战评估的发展演变,主要包括网络集成评估的地位和作用、网络集成评估的实施流程以及13次网络集成评估和3次作战评估的有关情况;其次,分析了网络集成评估的一系列作战试验特点,诸如实际作战需求牵引、逼真场景构建、试训一体化模式、部队战斗力的直接生成以及作战能力的军民融合式发展等;最后,提出了网络集成评估带来的若干启示,从满足实战能力需求开展作战试验、突出装备体系的互操作能力评估、探索试训结合的作战试验模式、组建专门的作战试验部队及鼓励工业部门参与作战试验等方面推动军队作战试验的发展。     

Cross-linking density and aging constitutive model of HTPB coating under prestrain thermal accelerated aging

In order to study the cross-linking density and aging constitutive relationship of HTPB coating during storage, the thermal accelerated aging tests at 0%, 3%, 6% and 9% prestrains were carried out. The cross-linking density of HTPB coating at different aging stages were tested using low-field ¹H NMR and the variation of cross-linking density was analyzed. The aging model of cross-linking density considering the chemical aging and the physical stretching factors was established. The uniaxial tensile tests were carried out on HTPB coating at different aging stages and the cross-linking density was introduced into Ogden hyperelastic constitutive model as a characterization parameter of correction coefficient. Combined with uniaxial tensile test results, a prestrain aging constitutive model of HTPB coating was established. The results show that the cross-linking density of HTPB coating increases rapidly at first and then slowly with the increase of thermal accelerated aging time without prestrain. Under prestrain conditions, the cross-linking density of HTPB coating decreases at the early stage, and increases rapidly at first and then slowly at the middle and late stages of thermal accelerated aging. The correlation coefficients of aging model of cross-linking density and aging constitutive model with test results are R > 0.9500 and R > 0.9900 respectively, which can be used to accurately describe the cross-linking density and aging constitutive relationship of HTPB coating under prestrain accelerated thermal aging conditions.     

Performance evaluation and optimization design of photoelectric pyrometer detection optical system

The measurement and control of high temperature play very important roles in national defense, military, scientific experiments, industrial and agricultural production. Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement. It has an important application in the field of high temperature measurement, and its performance directly affects the accuracy of temperature measurement. By improving the design of the detection optical system of the photoelectric pyrometer, the imaging performance of the photoelectric pyrometer can be improved effectively, and the temperature measurement accuracy can be improved. In this paper, the temperature measurement principle of photoelectric pyrometer, the working principle of the detection optical system and the composition of the system are introduced. The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed. The optical pyrometer detection optical system is simulated by ZEMAX software, based on the analysis results, the Modulation Transfer Function (MTF) and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system. The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.     

Research on construction of operation architecture based on complex network

Operation architecture plays a more important role in Network Centric Warfare (NCW), which involves dynamic operation networks with complex properties. Thus, it is essential to investigate the operation architecture under the informatization condition within NCW and find a proper network construction method to efficiently coordinate various functional modules on a particular situation, i.e., the aerial combat. A new method integrating the physical level and functional level of NCW is proposed to establish the operation architecture, where the concept of network operation constraints unit and net constructing mechanisms are employed to avoid conflicts among different platforms. Meanwhile, we conduct simulations to assess the effectiveness and feasibility of the constructed operation architecture and analyze the influence of the network parameters.     

The Gravity of Arms

The aim of this paper is to investigate the determinants of international arms transfers in a gravity model framework. By distinguishing between the decision to export arms (extensive margin) and the value of the arms exported (intensive margin), while also considering its interdependence, is what differentiates this paper from previous research. A theoretically justified gravity model of trade augmented with political and security motives is estimated using a two-stage panel data approach for 104 exporting countries over the period from 1950 to 2007. In addition to the usual gravity variables related to the economic mass of the trading countries and the trade cost factors, the model is extended with political and security factors. The level of democracy in both trading partners, political differences between trading partners and voting similarity with the United States in the UN General Assembly of the countries engaged in trade are the main political factors, whereas the existence of conflicts, military pacts, and embargoes are taken as security motives. The key result indicates that both political and security motives are an important determinant of an arms trade, but their effects on the extensive margin of exports (the decision to order a transfer) differs from their effect on the intensive margin (average value of exports). Moreover, the relative importance of the factors under study has changed since 1989. In the post-cold war period, countries that are less democratic are more likely to export arms, military pacts are less relevant and embargoes play a role.     

装备剩余寿命预测平行仿真中模型动态演化方法

装备平行仿真中的一个重要概念是实时数据驱动的模型动态演化,但是至今仍缺乏具体应用领域的实现方法。以带未知离散冲击的混合退化装备剩余寿命预测为背景,以多态Wiener状态空间模型为演化对象,提出一种装备平行仿真中模型动态演化方法,包括基于交互多模型强跟踪滤波的模型软切换和基于期望最大化算法的模型参数在线估计,并实现了基于平行仿真的装备剩余寿命实时预测。利用某轴承退化数据进行实例研究,结果表明该方法能有效提高仿真逼真度,剩余寿命预测的准确度较高、不确定性较小,具有较高工程应用价值。     

Interdiction models for delaying adversarial attacks against critical information technology infrastructure

Information technology (IT) infrastructure relies on a globalized supply chain that is vulnerable to numerous risks from adversarial attacks. It is important to protect IT infrastructure from these dynamic, persistent risks by delaying adversarial exploits. In this paper, we propose max‐min interdiction models for critical infrastructure protection that prioritizes cost‐effective security mitigations to maximally delay adversarial attacks. We consider attacks originating from multiple adversaries, each of which aims to find a “critical path” through the attack surface to complete the corresponding attack as soon as possible. Decision‐makers can deploy mitigations to delay attack exploits, however, mitigation effectiveness is sometimes uncertain. We propose a stochastic model variant to address this uncertainty by incorporating random delay times. The proposed models can be reformulated as a nested max‐max problem using dualization. We propose a Lagrangian heuristic approach that decomposes the max‐max problem into a number of smaller subproblems, and updates upper and lower bounds to the original problem via subgradient optimization. We evaluate the perfect information solution value as an alternative method for updating the upper bound. Computational results demonstrate that the Lagrangian heuristic identifies near‐optimal solutions efficiently, which outperforms a general purpose mixed‐integer programming solver on medium and large instances.     

Optimal allocation of minimal repairs in parallel and series systems

In reliability engineering, the concept of minimal repair describes that the repair brings the failed unit (eg, system or component) to the situation which is same as it was just before the failure. With the help of the well‐known Gamma‐Poisson relationship, this paper investigates optimal allocation strategies of minimal repairs for parallel and series systems through implementing stochastic comparisons of various allocation policies in terms of the hazard rate, the reversed hazard rate, and the likelihood ratio orderings. Numerical examples are presented to illustrate these findings as well. These results not only strengthen and generalize some known ones in the seminal work of Shaked and Shanthikumar, but also solve the open problems proposed by Chahkandi et al.'s study and Arriaza et al.'s study.