含噪混合盲扰信分离中联合降噪技术研究

针对盲扰信分离技术在含噪混合条件下分离效果差的问题,文章采用经验模态分解和小波变换联合的降噪技术进行分离前的消噪预处理,研究了联合降噪的三种模式,分别对其降噪效果进行了仿真分析,得到了一种较好的联合降噪模式。将该模式与无噪环境下的盲分离算法相结合,弥补了经典盲源分离算法处理含噪混合盲扰信分离的不足。仿真结果表明该算法在一定范围的低信噪比条件下,能够从含噪的混合信号中恢复出通信信号源。     

同轴插板式模式转换器反射特性

同轴插板式模式转换器是一种新型高功率微波TEM-TE11模式转换器。回顾了模式转换器中的模式转换过程,通过分析不同模式转换过程中波导不连续性结构的反射特性,得到了模式转换器总的反射特性。指出不连续性结构将在输入口形成同轴TEM和同轴TE11反射模;通过选择模式转换器的内外径尺寸可以消除TE11反射模;通过在输入口引入匹配金属杆和合理设计内导体末端锥体结构可以减小TEM反射模。     

变论域模糊自适应滑模有限时间收敛制导律

针对拦截高速机动目标的需求,研究了一种变论域模糊自适应滑模有限时间收敛制导律。推导了导弹-目标空间拦截模型,设计了三维滑模制导律;根据有限时间收敛制导律专家的经验,采用模糊自适应控制方法对滑模制导律的非切换项进行逼近,并设计了有限时间收敛模糊控制规则;提出了一种新型变论域伸缩因子,设计了基于新型伸缩因子的变论域模糊自适应滑模有限时间收敛制导律。仿真结果表明,所设计的制导律能够使导弹准确命中目标,并能够达到视线角速率有限时间收敛,且与比例制导律相比,具有更高的制导精度和更短的飞行时间。     

Capacity expansion under a service‐level constraint for uncertain demand with lead times

For a service provider facing stochastic demand growth, expansion lead times and economies of scale complicate the expansion timing and sizing decisions. We formulate a model to minimize the infinite horizon expected discounted expansion cost under a service‐level constraint. The service level is defined as the proportion of demand over an expansion cycle that is satisfied by available capacity. For demand that follows a geometric Brownian motion process, we impose a stationary policy under which expansions are triggered by a fixed ratio of demand to the capacity position, i.e., the capacity that will be available when any current expansion project is completed, and each expansion increases capacity by the same proportion. The risk of capacity shortage during a cycle is estimated analytically using the value of an up‐and‐out partial barrier call option. A cutting plane procedure identifies the optimal values of the two expansion policy parameters simultaneously. Numerical instances illustrate that if demand grows slowly with low volatility and the expansion lead times are short, then it is optimal to delay the start of expansion beyond when demand exceeds the capacity position. Delays in initiating expansions are coupled with larger expansion sizes. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

采用故障树的数据链系统故障模式

根据数据链系统的故障检测困难的特点,采用故障树分析法,建立了数据链系统的故障树;在详细分析数据链系统故障特点的基础上,提出了端口功能检测法、调制解调器替代法和电性能参数检测法3种故障定位方法。设计了端口功能检测法中数据测试仪、终端设备模拟器和自环测试监测仪的系统连接方法,设计了调制解调器替代法的系统连接方法和电性能参数检测法的常见电性能参数。综合使用故障检测定位方法,可快速定位数据链系统常见故障。     

A novel signal feature extraction technology based on empirical wavelet transform and reverse dispersion entropy

Feature extraction is an important part of signal processing, which is significant for signal detection, classification, and recognition. The nonlinear dynamic analysis method can extract the nonlinear characteristics of signals and is widely used in different fields. Reverse dispersion entropy (RDE) proposed by us recently, as a nonlinear dynamic analysis method, has the advantages of fast computing speed and strong anti-noise ability, which is more suitable for measuring the complexity of signal than traditional permutation entropy (PE) and dispersion entropy (DE). Empirical wavelet transform (EWT), based on the theory of wavelet analysis, can decompose a complex non-stationary signal into a number of empirical wavelet functions (EWFs) with compact support set spectrum, which has better decomposition performance than empirical mode decomposition (EMD) and its improved algorithms. Considering the advantages of RDE and EWT, on the one hand, we introduce EWT into the field of underwater acoustic signal processing and fault diagnosis to improve the signal decomposition accuracy; on the other hand, we use RDE as the features of EWFs to improve the signal separability and stability. Finally, we propose a novel signal feature extraction technology based on EWT and RDE in this paper. Experimental results show that the proposed feature extraction technology can effectively extract the complexity features of actual signals. Moreover, it also has higher distinguishing ability for different types of signals than five latest feature extraction technologies.     

交互式翻译教学模式的构建及其绩效研究

交互式翻译法要求教师根据自身的特点、学习者的个体差异和教学情景,采用灵活、多变的多种教学方法进行教学。教师应该鼓励学生更多地参与到教学中,通过师生互动形成良好的学习氛围,促进学生翻译知识的自觉吸收。本文尝试构建交互式翻译教学模式并研究其绩效。     

基于PG图的空间信息服务链建模方法

空间数据的异构、分布与海量的固有特点导致了空间信息应用的分布与难于集成的现状,成为制约空间数据大规模应用的主要因素。根据服务链的思想,提出了基于PG(优先图)构造服务链图进行空间数据应用集成建模的方法,并定义了一组变换实现对模型的逐步精化和向现实模型转化。该方法在面向资源环境的空间信息应用服务中进行了初步应用。     

基于高层滑模的导弹电液伺服机构模糊滑模控制

针对导弹电液伺服机构的跟踪控制问题,设计了一种模糊滑模控制方案。将高层滑模函数作为模糊控制系统的一维输入,简化了一般模糊滑模控制系统结构,从而得到具有少量规则的模糊滑模的设计方案。仿真结果表明了该方案可以减小跟踪误差,增强系统的鲁棒性和削弱控制信号中的高频抖振。     

防空导弹反弹道导弹跟踪制导规律研究和弹道仿真

利用基准优化弹道参数和滑模控制思想,构造滑动面,提出了一种新的弹道跟踪制导规律。给出了详细的推导过程,并且对所构造李雅普诺夫函数进行了稳定性证明,还进行了弹道跟踪制导数字仿真,提供了仿真弹道数据和有关弹道参数曲线。结果表明,提出的弹道跟踪制导规律是有效的,可用的。