A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

机翼不对称损伤飞机在大侧滑角下的操稳特性研究

对某小型电动无人机(以下简称SEPUAV)在其左翼破损40%面积矩下的操稳特性进行详细分析。首先在此损伤下典型大侧滑角定常工作点附近进行特殊的小扰动线性化,然后进行特征根和飞行运动模态的分析;其次对此特殊构型SEPUAV进行操稳特性、时频响应特性进行分析。分析结果表明:左翼破损40%面积矩SEPUAV出现特有运动模态并影响全部纵侧向运动状态的响应;部分传递函数出现较多非最小相位零点从而导致初始响应发生反向;部分通道的Bode图中出现多个波峰波谷并有相角提前等现象。分析结果对后续容损飞行控制器的设计起到铺垫的作用。     

Single batch machine scheduling with deliveries

We consider the problem of scheduling a set of n jobs on a single batch machine, where several jobs can be processed simultaneously. Each job j has a processing time p_j and a size s_j. All jobs are available for processing at time 0. The batch machine has a capacity D. Several jobs can be batched together and processed simultaneously, provided that the total size of the jobs in the batch does not exceed D. The processing time of a batch is the largest processing time among all jobs in the batch. There is a single vehicle available for delivery of the finished products to the customer, and the vehicle has capacity K. We assume that K = rD, where and r is an integer. The travel time of the vehicle is T; that is, T is the time from the manufacturer to the customer. Our goal is to find a schedule of the jobs and a delivery plan so that the service span is minimized, where the service span is the time that the last job is delivered to the customer. We show that if the jobs have identical sizes, then we can find a schedule and delivery plan in time such that the service span is minimum. If the jobs have identical processing times, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most 11/9 times the optimal service span. When the jobs have arbitrary processing times and arbitrary sizes, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most twice the optimal service span. We also derive upper bounds of the absolute worst‐case ratios in both cases. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 470–482, 2015     

Optimal pricing for a short life‐cycle product when customer price‐sensitivity varies over time

Technology products often experience a life‐cycle demand pattern that resembles a diffusion process, with weak demand in the beginning and the end of the life cycle and high demand intensity in between. The customer price‐sensitivity also changes over the life cycle of the product. We study the prespecified pricing decision for a product that exhibits such demand characteristics. In particular, we determine the optimal set of discrete prices and the times to switch from one price to another, when a limited number of price changes are allowed. Our study shows that the optimal prices and switching times show interesting patterns that depend on the product's demand pattern and the change in the customers' price sensitivity over the life cycle of the product. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

质漏对联合循环化学发动机性能的影响

分析存在有限速率传质和质漏损失的联合循环化学发动机性能,导出功率、效率最佳关系,最大功率及其相应效率,以及最大效率及其相应功率     

紧固件拆装时间预计模型

紧固件拆装作业时间是影响机械产品维修性的主要因素之一,占机械产品维修作业时间的70％～80％。因此,探讨紧固件拆装作业时间的预计方法,对研究、设计机械产品的维修性,将是十分必要的。通过分析紧固件拆装作业过程,探索出了影响拆装作业时间的诸因素,并对所有的影响因素进行分析、权衡和回归,建立紧固件拆装作业时间的预计模型。将此模型在某型履带式车辆上进行了实际验证,证明了模型的正确性及通用性。     

Local search methods for the discrete time/resource trade-off problem in project networks

In this paper we consider the discrete time/resource trade-off problem in project networks. Given a project network consisting of nodes (activities) and arcs (technological precedence relations), in which the duration of the activities is a discrete, nonincreasing function of the amount of a single renewable resource committed to it, the discrete time/resource trade-off problem minimizes the project makespan subject to precedence constraints and a single renewable resource constraint. For each activity, a work content is specified such that all execution modes (duration/resource requirement pairs) for performing the activity are allowed as long as the product of the duration and the resource requirement is at least as large as the specified work content. We present a tabu search procedure which is based on a decomposition of the problem into a mode assignment phase and a resource-constrained project scheduling phase with fixed mode assignments. Extensive computational experience, including a comparison with other local search methods, is reported. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 553–578, 1998     

Alleviating time inconsistent behaviors via a competition scheme

Under quasi‐hyperbolic discounting, the valuation of a payoff falls relatively rapidly for earlier delay periods, but then falls more slowly for longer delay periods. When the salespersons with quasi‐hyperbolic discounting consider the product sale problem, they would exert less effort than their early plan, thus resulting in losses of future profit. We propose a winner‐takes‐all competition to alleviate the above time inconsistent behaviors of the salespersons, and allow the company to maximize its revenue by choosing an optimal bonus. To evaluate the effects of the competition scheme, we define the group time inconsistency degree of the salespersons, which measures the consequence of time inconsistent behaviors, and two welfare measures, the group welfare of the salespersons and the company revenue. We show that the competition always improves the group welfare and the company revenue as long as the company chooses to run the competition in the first place. However, the effect on group time inconsistency degree is mixed. When the optimal bonus is moderate (extreme high), the competition motivates (over‐motivates) the salesperson to work hard, thus alleviates (worsens) the time inconsistent behaviors. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 357–372, 2017     

Determining a threshold control policy for an imperfect production system with rework jobs

Consider a threshold control policy for an imperfect production system with only a work center handling both regular and rework jobs. An imperfect production system studied here, generates defect jobs by factors other than machine failures. A threshold control or (ω, s) policy sets the guideline for a work center to switch between regular and rework jobs. A production cycle begins with loading and processing of several batches of regular jobs with a lot size equal to s. The outcome of each completed regular job is an independent Bernoulli trial with three possibilities: good, rework, or scrap. Once the work center accumulates more than a threshold ω of rework jobs, it finishes the last batch of regular jobs and switches to rework jobs. The objective of this research is to find a threshold ω and a lot size s that maximize the average long‐term profit. The ultimate goal is to construct a simple algorithm to search for ω and s that can be implemented directly in production management systems, as a result of this work. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 273–301, 1999