大延时网络中的主动队列管理机制

研究了网络延时对路由器主动队列管理机制的影响,分析了几种典型主动队列管理算法在大延时网络中的性能。在介绍了基于内模补偿的DC-AQM算法的优缺点之后,根据PID控制器延时补偿的Ziegler-Nichols设定方法,提出了ZNDC(Ziegler-Nichols delay compensation)AQM算法并进行了仿真实验验证,实验结果表明算法达到了预期的目标。     

气囊辅助RTM制备复合材料承力筒内腔尺寸控制技术

根据气囊充压压力与复合材料承力筒内径之间的变化关系,给出了成型复合材料承力筒内表面的气囊尺寸计算方程。分析了气囊充压压力增大对承力筒的壁厚、纤维含量和弯曲性能的影响。采用气囊辅助RTM工艺整体制备出复合材料承力筒。试验结果表明,气囊充压压力使复合材料承力筒的壁厚减薄,纤维体积含量增加,弯曲性能提高;选择适当的气囊充压压力可以制备出满足设计要求的复合材料承力筒。     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.     

Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

Oligopolistic contracting: Channel coordination under competition

We study contracts between a single retailer and multiple suppliers of two substitutable products, where suppliers have fixed capacities and present the retailer cost contracts for their supplies. After observing the contracts, the retailer decides how much capacity to purchase from each supplier, to maximize profits from the purchased capacity from the suppliers plus his possessed inventory (endowment). This is modeled as a noncooperative, nonzero‐sum game, where suppliers, or principals, move simultaneously as leaders and the retailer, the common agent, is the sole follower. We are interested in the form of the contracts in equilibrium, their effect on the total supply chain profit, and how the profit is split between the suppliers and the retailer. Under mild assumptions, we characterize the set of all equilibrium contracts and discuss all‐unit and marginal‐unit quantity discounts as special cases. We also show that the supply chain is coordinated in equilibrium with a unique profit split between the retailer and the suppliers. Each supplier's profit is equal to the marginal contribution of her capacity to supply chain profits in equilibrium. The retailer's profit is equal to the total revenue collected from the market minus the payments to the suppliers and the associated sales costs.     

一种新型SEU/SET加固鉴频鉴相器设计

分析验证了传统D触发器型PFD结构的SEE敏感性,提出了一种新型的SEU/SET加固鉴频鉴相器,SPICE模拟结果表明该结构功能正确,对于1GHz的时钟信号,鉴频鉴相的精度可达0.8rad.锁相环的整体模拟结果表明,抗辐照的PFD与传统的PFD相比,锁相环的电学性能没有改变,锁定时间保持一致.对传统D触发器型PFD和设计加固的PFD进行了遍历轰击模拟,结果显示,提出的抗辐照PFD加固效果非常明显,敏感节点的数目可以降低80%左右.     

YHFT-DX高性能DSP中Cache失效流水设计

YHFT-DX是国防科技大学自主研制的一款高性能DSP.以提升YHFI-DX的 Cache 性能为目标,研究了降低 Cache 失效延迟的优化策略,设计并实现了一种针对高频高性能DSP的一级数据Cache优化策略--失效流水.与传统优化策略相比,该策略将连续访问Cache的失效请求并进行流水化处理,使多个Cache失效延迟重叠,从而达到降低平均Cache失效代价的目的.将该策略应用到YHFT-DX芯片的一级数据Cache控制器的设计与优化中,使访问Cache失效引起的流水线停顿从8拍降为2拍,显著提升了系统性能.     

室温工作的单电子晶体管研究

由于具有低功耗、高速度、高集成度等优点,单电子晶体管成为最有前景的纳米电子功能器件之一.但是,由于结构上的特殊性,单电子晶体管只能在低温下正常工作,该特性限制了其实用化进程.因此,研究可在室温下工作的单电子晶体管具有重要意义.在分析单电子晶体管工作机理的基础上,计算了单电子晶体管室温工作的基本条件,并实验制备出了样片.测试结果表明,所制备的单电子晶体管可在室温下表现出库仑振荡等基本特性.该研究成果将为单电子晶体管的集成实用化打下良好的基础.     

相变温控混凝土相变储热性能试验研究

混凝土中加入相变材料之后对水化反应产生的热量有一定的吸收,从而对混凝土内部温度有一定的控制作用,这将减少混凝土温度裂缝产生的几率.通过筛选带一定结晶水的硬脂酸、月桂酸和正十二醇的3种有机相变材料,模拟实际大体积混凝土工程来研究不同相变材料的掺量、控温效果.运用计算机软件绘制时间一温度曲线,从中搜寻出最佳的相变材料掺量.     

运动目标轨迹分类与识别

运动目标轨迹识别是运动分析中的基本问题,其目的是解释所监视场景中发生的事件,对所监视场景中运动目标轨迹的行为模式进行分析与识别,智能地做出自动分类.对轨迹有效性判断后采用K均值聚类,引入改进的隐马尔可夫模型算法,针对轨迹的复杂程度对各个轨迹模式类建立相应的隐马尔可夫模型,利用训练样本训练模型得到可靠的模型参数,计算测试样本对于各个模型的最大似然概率,选取最大概率值对应的轨迹模式类作为轨迹识别的结果,对两种场景中聚类后的轨迹进行训练与识别,平均识别率较高,实验结果表明该方法是有效的.