各向异性材料的有效弹性模量

在夹杂理论的基础上,采用用自洽法导出了含分布夹杂的各向异性弹性体的本构关系和有效弹性模量的细观力学表达式。本文得到的公式不仅可以处理含缺陷和损伤的材料的有效弹性模量,而且还可处理诸于纤维复合材料等各向异性材料的理论及有效弹性模量,从而为建立材料细观结构与宏观性能之间的关系提供了理论基础。     

基于宽带Delphi和功能分解相结合的装备软件早期成本估算

针对装备软件早期成本估算时存在的相关成本信息基础薄弱的“贫信息”问题,提出了基于宽带Delphi与功能分解的装备软件早期成本估算组合法。该组合法依据领域专家的知识和经验对软件成本做出判断,避免了需要过多依赖历史信息的局限性。而功能分解法能将软件按功能模块进行细分,提高了宽带Delphi估算的精度。     

基于北斗短报文的远海实时精密单点定位

针对远海精密导航与定位费用高昂的问题,提出利用北斗短报文传输多模全球导航卫星系统的实时服务数据,实现远海实时精密单点定位。为了降低通信成本和硬件成本,本研究对实时服务数据进行简化,弥补了北斗短报文带宽的不足;为了克服北斗短报文频率低的缺点,采取了实时精密星历预报的方法,来获取分钟间隔以外时刻的卫星轨道位置和钟差改正。对基于北斗短报文的远海实时精密单点定位的数据处理过程进行了仿真模拟。后期处理实测海洋观测数据,对定位性能进行测试,可实现水平方向厘米级定位,竖直方向精度为10~20 cm。该方法为低成本的远海实时定位提供了技术参考。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

基于案例的推理在舰船维修费预测中的应用

针对市场经济条件下舰船维修费预测不确定性越来越大的问题,提出了一种基于案例推理的舰船维修费预测模型。首先,利用修船厂的历史数据,采用特征向量表示法构建舰船维修费案例库;其次,为提高案例检索效率,采用组合模糊聚类算法建立舰船维修费案例的分类索引结构,并提出基于最近邻法的两步检索策略检索相似案例;最后,采用加权平均法对相似案例进行修改以获取预测值,同时采用主动学习策略保存当前案例并更新案例库。实例仿真结果表明:与传统舰船维修费预测模型相比,基于案例的推理模型具有更高的预测精度,所提模型是有效的。     

15000m~3钢板贴壁油罐建设静态投资分析

以部队某保障基地油库军用柴油扩容工程采用钢板贴壁工艺新建的1座15 000 m3地下水封油池为例,从技术经济学角度对钢板贴壁油罐作了静态投资分析。该钢板贴壁油罐静态总投资1 756.95万元,其中占总投资比例最高者为地下工程建设,达到53.76%,库容投资1 171.30元/m3。结果表明:钢板贴壁油罐较地下水封石洞油罐整体经济效益明显;投资定额可供编制预算参考。     

基于作业成本原理的飞行训练保障费用模型

飞行训练保障费用是飞机使用保障费用中的重要组成部分,也是使用保障费用估算的重点和难点。结合目前航空兵部队实际工作情况,首先利用作业成本法的基本原理,对航空兵部队飞行保障阶段的作业进行划分,得出成本库及成本动因。其次针对军机飞行保障阶段的多种作业,建立基于作业成本法的飞行训练保障费用模型。最后通过算例说明其比其他估算方法所具备的优势。     

Maximizing the ratio of two convex functions over a convex set

The purpose of this article is to present an algorithm for globally maximizing the ratio of two convex functions f and g over a convex set X. To our knowledge, this is the first algorithm to be proposed for globally solving this problem. The algorithm uses a branch and bound search to guarantee that a global optimal solution is found. While it does not require the functions f and g to be differentiable, it does require that subgradients of g can be calculated efficiently. The main computational effort of the algorithm involves solving a sequence of subproblems that can be solved by convex programming methods. When X is polyhedral, these subproblems can be solved by linear programming procedures. Because of these properties, the algorithm offers a potentially attractive means for globally maximizing ratios of convex functions over convex sets. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

编队战斗机超视距空战效能评估

第三代战斗机主要空战模式是超视距空战,对编队战斗机超视距空战的全过程进行分析,建立了战斗机编队和导弹的运动模型,以领先发射概率和空战交换比作为评估指标,对编队战斗机超视距空战效能进行评估,最后给出了算例,重点分析了地面防空火力和编队战斗机数量、携带导弹总数等因素对空战交换比的影响.