炸药冲击波激励工作气体产生可见光的辐射机理研究

研究炸药冲击波激励工作气体的辐射问题。通过理论分析 ,给出气体冲击波波阵面的数学模型。提出了高温环境下工作气体产生可见光的辐射机理 ,最后提出在冲击波作用下提高气体辐射强度的方法。     

Preservation of unimodality under shock models

A number of results pertaining to preservation of aging properties (IFR, IFRA etc.) under various shock models are available in the literature. Our aim in this paper is to examine in the same spirit, the preservation of unimodality under various shock models. For example, it is proved that in a non-homogeneous Poisson shock model if {p_k}_K≥0, the sequence of probabilities with which the device fails on the kth shock, is unimodal then under some suitable conditions on the mean value function Λ (t), the corresponding survival function is also unimodal. The other shock models under which the preservation of unimodality is considered in this paper are pure birth shock model and a more general shock model in which shocks occur according to a general counting process. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 952–957, 1999     

Effect of microstructure on short pulse duration shock initiation of TATB and initial response mechanism

Micro-TATB particles with different sizes and 3D nanoporous TATB architectures with different specific surface areas were prepared through recrystallization to study short pulse duration shock initiation properties by electric gun technology. For micro-TATB, the initiation threshold significantly decreases with TATB average size ranging from 79.7 μm to 0.5 μm. For 3D nanoporous TATB architecture, the initiation threshold decreases and then increases with specific surface areas increased from 9.6 m²/g to 36.2 m²/g. The lowest initiation thresholds are obtained for the micro-TATB with average sizes of 1.3 μm and 0.5 μm, and 3D nanoporous TATB architecture with specific surface area of 22.4 m²/g. The shock initiation thresholds of micro-TATB and 3D nanoporous TATB architectures show significantly decreases with the porosity increased. The decomposition reaction and thermal conductivity properties were further investigated to understand the initial response mechanism. High porosity provides more collapse sites to generate high temperature for formation of hot spots. The low thermal conductivity and decomposition temperature could enhance the formation and ignition of the hot spots, and initial decomposition reaction of TATB. The effect of the decomposition temperature is higher than that of the thermal conductivity on the shock initiation properties. The enhanced decomposition reaction could promote energy release and transfer process from the ignition to the combustion. This work offers a new insight to understand the effects of microstructure on the shock initiation properties and the initial response mechanism of TATB.     

B4C／Al复合板中应力波行为分析（Ⅱ）

在已建立的应力波传播模型和研究弹、板间作用力所获结果的基础上,为分析复合板应力的变化,对复合板弹板碰撞承受的应力进行了简化处理,根据应力波传播特性,确定了复合板内能量集中区域,研究了应力波在复合板巾的传播和能耗,并讨论了应力波对陶瓷的作用。通过近似计算,发现烧蚀消耗的弹丸动能较大,在复合板中,Al板的塑性变形吸收了19％的弹丸动能。     

基于湍流冲击振动的输油管道稳定性研究

要水流冲刷管底形成悬空管道,悬空管道假设为一端固定一端铰支的均质等截面简支梁。在分析管道垂直载荷对悬空管道临界长度影响的基础上,考虑到输油管道振动引起的动应力以及管道振动时的外部阻尼、管道轴向力和内压对管道的作用,对悬空管道进行受力分析,导出管道振动微分方程。以保证管道强度的安全可靠为判据,计算求出悬空管道的临界长度,以便预测管道失稳条件,并对其及时采取稳固及抢修措施。     

爆电换能的理论分析

考虑了铁电介质的介电松弛和电导率松弛,计及冲击波阵面在样品中传播过程的影响,改进了垂直模式冲击波加载铁电陶瓷电响应的理论,且理论分析与实验结果基本一致。     

利用OH发射谱进行的高温低浓度甲烷着火研究

采用激波管进行低浓度甲烷和空气混合气的着火实验,通过测量压力和OH发射光谱,得到不同工况下的着火延迟,并与甲烷的详细反应机理计算结果作比较。结果表明:不同浓度下甲烷着火延迟的对数与温度倒数呈线性关系,着火延迟随甲烷浓度的降低而减少;贫燃条件下,采用详细动力学机理计算的表观活化能与实验数据拟合较好。     

一种求解飞行器廓线间断处超音速复杂流场的方法

用有限体积法求解三维完全气体的Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程,并将通量守恒的分区计算方法和Ｂ－Ｌ湍流模型修正结合在一起,捕捉到了间断处的分离涡、激波、膨胀波等流场信息     

THE REGIONAL ECONOMIC EFFECTS OF MILITARY BASE REALIGNMENTS AND CLOSURES IN GERMANY

We identify the causal effect of a reduction in military personnel on a number of socioeconomic indicators within the peripheries of military bases. The base realignments and closures in Germany are used as an exogenous source of variation that allows us to identify the effect of a demand shock on household income, output, unemployment, and tax revenue within a specified buffer zone around each base. The analysis covers 298 communities for the period 2003–2007. Consistent with evidence found elsewhere, we find that these base adjustments have only a marginal impact on the local community in which the bases are located.     

弹丸对钢管混凝土结构冲击效应的数值模拟

为将模块化设计钢管混凝土结构用于防御工事的构建,进行20 mm口径弹丸垂直侵彻混凝土结构和不同钢管混凝土结构的数值模拟,对比不同结构的抗冲击性能,分析钢管混凝土结构抗冲击性能提高的机理.结果表明,正六边形钢管混凝土结构抗冲击性能良好,兼容了金属和混凝土材料的优点,克服了混凝土材料的脆性以及金属材料容易发生局部屈曲的缺点,为防御工事结构的改进提供了理论基础和参考依据.