Deconsolidation and combustion performance of thermally consolidated propellants deterred by multi-layers coating

Both heating and solvent-spray methods are used to consolidate the standard grains of double-base oblate sphere propellants plasticized with triethyleneglycol dinitrate (TEGDN) (TEGDN propellants) to high density propellants. The obtained consolidated propellants are deterred and coated with the slow burning multi-layer coating. The maximum compaction density of deterred and coated consolidated propellants can reach up to 1.39 g/cm³. Their mechanic, deconsolidation and combustion performances are tested by the materials test machine, interrupted burning set-up and closed vessel, respectively. The static compression strength of consolidated propellants deterred by multi-layer coating increases significantly to 18 MPa, indicating that they can be applied in most circumstances of charge service. And the samples are easy to deconsolidate in the interrupted burning test. Furthermore, the closed bomb burning curves of the samples indicate a two-stage combustion phenomenon under the condition of certain thickness of coated multi-layers. After the outer deterred multi-layer coating of consolidated samples is finished burning, the inner consolidated propellants continue to burn and breakup into aggregates and grains. The high burning progressivity can be carefully obtained by the smart control of deconsolidation process and duration of consolidated propellants. The preliminary results of consolidated propellants show that a rapid deconsolidation process at higher deconsolidation pressure is presented in the dynamic vivacity curves of closed bomb test. Higher density and higher macro progressivity of consolidated propellants can be obtained by the techniques in this paper.     

Damage visualization and deformation measurement in glass laminates during projectile penetration

Transparent armor consists of glass-polymer laminates in most cases. The formation and propagation of damage in the different glass layers has a strong influence on the ballistic resistance of such laminates. In order to clarify the course of events during projectile penetration, an experimental technique was developed, which allows visualizing the onset and propagation of damage in each single layer of the laminate. A telecentric objective lens was used together with a microsecond video camera that allows recording 100 frames at a maximum rate of 1 MHz in a backlit photography set-up. With this technique, the damage evolution could be visualized in glass laminates consisting of four glass layers with lateral dimensions 500 mm × 500 mm. Damage evolution was recorded during penetration of 7.62 mm AP projectiles with tungsten carbide core and a total mass of 11.1 g in the impact velocity range from 800 to 880 m/s. In order to measure the deformation of single glass plates within the laminates, a piece of reflecting tape was attached to the corresponding glass plate, and photonic Doppler velocimetry (PDV) was applied. With the photonic Doppler velocimeter, an infrared laser is used to illuminate an object to be measured and the Doppler-shifted light is superimposed to a reference light beam at the detector. The simultaneous visualization and PDV measurement of the glass deformation allow determining the deformation at the time of the onset of fracture. The analysis of the experimental data was supported by numerical simulations, using the AUTODYN commercial hydro-code.     

Reliability sensitivity analysis based on multi-hyperplane combination method

For a nonlinear limit state function, the first-order reliability method (FORM) may cause large errors in the computation of not only the reliability index or failure probability but also the reliability sensitivity. In order to obtain more the accurate results of the reliability sensitivity analysis, a number of hyperplanes are built near the design point by first-order Tayler series expansion, which replace the known nonlinear limit state hypersurface, and an equivalent computational method is utilized to construct an equivalent hyperplane of the obtained hyperplanes. And the reliability sensitivities can be estimated more accurately by the derived equations based on the equivalent hyperplane. An example shows that the method is effective and feasible.     

Theoretical study of an energetic material di-1H-1,3,4-triazole derivatives

Computations by density functional theory (DFT) method are performed on a series of di-1H-1,3,4-triazole derivatives with different substituents and linkages. The heat of formation (HOF) is predicted by the designed isodesmic reactions. The predicted results reveal that –N₃ and –NN– groups are effective structural units for increasing the HOF values of the di-1H-1,3,4-triazole derivatives. The HOMO–LUMO gap is affected by the substituents and linkage groups. Detonation performance is evaluated using the Kamlet–Jacobs approach based on the calculated density and HOF. The results indicate that –NO₂, –NF₂, –NH–, –NH–NH– and –NN– groups are helpful for enhancing the detonation properties of di-1H-1,3,4-triazole derivatives. The bond dissociation energy and bond order of the weakest bonds are analyzed to investigate their stability. It is observed that the –CH₂–, –CH₂–CH₂– and –CHCH– groups are effective structural units for improving the stabilities of these derivatives. Considering the detonation performance and the stability, five compounds are screened as the potential candidates for high energy density materials.     

基于数据场的登陆作战体系兵力编组效能分析?

兵力编组效能直接影响登陆作战体系的作战能力。在分析梯队式和群队式兵力编组模式下登陆作战体系网络模型的基础上,利用数据场理论研究登陆作战体系的拓扑势场,描述梯队或群队间由支援、协同产生的协同作战能力,建立基于数据场的登陆作战体系兵力编组效能模型,并进行仿真分析。得到了一种定量分析兵力编组作战效能的方法。     

自由曲面的立体视觉测量与加工一体化研究

对自由曲面的立体现觉测量与加工一体化技术中的图像匹配、曲面造型以及接口设计等问题进行了分析与讨论,并提出了切实可行的解决办法。     

多尺度PCA-HOG遥感异源图像匹配算法

针对遥感异源图像匹配中非线性灰度畸变和强噪声干扰问题,提出一种基于主成分分析(Principal Components Analysis,PCA)和方向梯度直方图(Histogram of Oriented Gradients,HOG)的遥感异源图像匹配算法.该算法利用HOG提取图像间的几何结构共性特征,能有效克服异源...     

雷达虚拟维修训练中交互系统的通用性

基于USB接口技术对"通用雷达装备虚拟维修训练系统(URVMTS)"的人机交互系统进行研究,通过合理的软、硬件设计实现了系统的通用性。不同的实装操作部件经过适当的信号调理均可以通过该系统方便地实现与雷达虚拟样机之间的交互。着重介绍了交互系统的通用性设计与实现方法,包括系统的通用性设计方案,USB硬件电路的通用性设计及相应的软件开发。     

模糊PID控制在制导滑翔弹滚动稳定回路中的应用

由于制导滑翔弹在不同高度变速飞行过程中,其飞行动力系数随着飞行条件的变化而发生较大变化,呈现严重的非线性,给控制系统的设计带来较大困难。结合模糊控制和PID控制的特点,提出一种基于模糊PID的控制系统设计新方法,并将此方法用于制导滑翔弹稳定回路中,仿真结果表明这种控制器可使系统获得很好的相对稳定性和鲁棒特性,并克服了工程上自动驾驶仪PID控制参数设计中的盲目性。     

可变搜索区末制导雷达捕捉模型

反舰导弹远程化是一种发展趋势。但是随着射程的增加,反舰导弹自控终点的误差散布也增加,同时降低了目标捕捉概率,扩大末制导雷达搜索区域是解决该问题的一个途径,但这将降低末制导雷达的目标选择能力。选用可变搜索区末制导雷达是解决该矛盾的一种方法。在分析该模式末制导雷达搜索规律的基础上,建立了可变搜索区末制导雷达目标捕捉模型,为该模式末制导雷达目标捕捉概率的计算提供了一种较准确的方法。仿真结果显示该模型基本可信。