Cf/SiC复合材料制备过程对碳纤维的损伤

对几种类型的碳纤维在Cf/SiC复合材料制备工艺中的先驱体中氧含量及高温热处理和PCS浸渍裂解处理过程中造成的损伤进行了考察,并探讨了损伤机制.结果表明,碳纤维石墨化程度和表面状态的差别会对其在复合材料制备过程中的损伤程度产生影响.石墨化程度高的M40JB碳纤维损伤程度较大;表面呈活性的JC1#碳纤维对外界条件的变化较为敏感;而石墨化程度不高而表面不活泼的JC2#碳纤维则损伤程度较小且较稳定.     

实时潜艇损管专家系统的设计与实现

介绍实时潜艇损管专家系统的设计与实现.该系统应用专家系统理论对潜艇损管训练及其在危险情况下进行损管决策领域的知识进行了建模,具有连续实时判断潜艇受损后的浮态和稳性以及制定损管决策方案和损管有效性检验功能.     

弹炮结合武器系统效能评估

简要分析了发展近程反导武器系统的必要性和弹炮结合系统的优势,并以近程舰炮武器系统为基础,给出了弹炮结合系统的基本组成。利用WSEIAC模型及系统组成的串并联关系,分析了系统在开始工作时,以及在工作过程中,可能出现的不同状态,并建立了它的效能评估数学模型。最后根据实际工程应用经验数据,对弹炮结合系统的效能进行了计算,并分析了计算结果,为系统的设计、研制、评价提供了依据。     

Damage functions and estimates of fratricide and collateral damage

There are multiple damage functions in the literature to estimate the probability that a single weapon detonation destroys a point target. This paper addresses differences in the tails of four of the more popular damage functions. These four cover the asymptotic tail behaviors of all monotonically decreasing damage functions with well‐behaved hazard functions. The differences in estimates of probability of kill are quite dramatic for large aim‐point offsets. This is particularly important when balancing the number of threats that can be engaged with the chances of fratricide and collateral damage. In general, analysts substituting one damage function for another may badly estimate kill probabilities in offset‐aiming, which could result in poor doctrine. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 306–321, 2003.     

Analysis of down times of jib cranes—A stochastic approach

In this paper a case study dealing with the maintenance problem of jib cranes is presented. A jib crane is viewed as a complex system whose performance is observed as a single realization over period of time. After pointing out limitations of existing stochastic models to analyze the observed realization a new family of bivariate stochastic processes is introduced. The data of jib crane is analyzed using new model and cross‐validated using part of the data set. It is noted that the new family of stochastic processes is useful to analyze bivariate data where one of the variables is finitely valued and the other is nonnegative and continuous. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 231–243, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10006     

滑翔增程弹滑翔弹道优化设计分析

针对鸭式布局的滑翔增程弹,建立了滑翔增程弹滑翔弹道的模型,采用使滑翔弹道上每一点的升阻比最大的设计思想进行弹道优化设计,导出了俯仰舵偏角与平衡攻角的表达式,并对滑翔飞行弹道特性进行了仿真计算分析.仿真计算表明,滑翔弹道与常规弹道降弧段相比下降趋缓,增程效果显著.     

离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

基于仿真的飞机战损部位及备件需求确定

飞机战斗损伤部位及战时备件需求的确定对做好战时维修保障工作具有重要意义.提出了作战飞机的战斗损伤部位的确定方法,建立了飞机部件的当量模型和飞机受导弹攻击的仿真模型,确定了飞机的战伤分布规律.在确定飞机战伤分布规律的基础上,建立了飞机战伤备件和故障备件需求模型,为作战飞机的战伤研究及航材储备作了有益的探讨.     

并联TBCC动力对高超声速飞行器性能的影响

针对马赫数为6的一级高超声速巡航飞行器的动力需求,提出涡轮/亚燃冲压/双模态超燃冲压组合动力（T/RJ/DMSJ）和射流预冷涡轮/亚燃冲压/双模态超燃冲压组合动力(PCT/RJ/DMSJ)两种方案。在给定的飞行任务下,分析起飞推重比分别为0.8和1.0时,飞行器完成任务时的航程和飞行时间,并对比了PCT/RJ/DMSJ在两种工作模态下的性能。研究结果表明：在相同的起飞推重比下,两种组合动力方案的航程和飞行时间相差不大。当起飞推重比为0.8时,采用PCT/RJ/DMSJ组合动力方案比T/RJ/DMSJ组合动力方案的航程高出3.6%,飞行时间高出3.8%;当起飞推重比为1.0时,PCT/RJ/DMSJ的航程和飞行时间比T/RJ/DMSJ的分别高出4.6%和4.8%。在小推重比下,跨声速段的燃料消耗和飞行时间占整个加速爬升段的比例较大,随着推重比的增加,这个比例减小,巡航可用的燃料比例增大,巡航距离增加,提高起飞推重比可以提高超声速飞行器的航程并缩短飞行时间。